Transient Moisture Distribution and Hygrothermal Stress Analysis of Composite Laminates Using Equivalent Diffusion Methods

Abstract

It often takes several decades to reach moisture equilibrium state in composite laminates. Therefore, hourly varying fluctuating boundary moisture and temperature conditions require several millions of time steps to reach a state of equilibrium. A new transient analysis method is proposed to efficiently solve moisture distribution of composite laminates with rapidly fluctuating moisture and temperature boundary conditions. First, effective constant diffusivity and maximum moisture content were obtained by averaging transient temperature-dependent moisture diffusivity. In this way, a simple analytic solution can be effectively used to determine the transient moisture distribution under hourly fluctuating boundary conditions. Its efficiencies are demonstrated in three different conditions by comparing this method with a conventional finite difference method. Hygrothermal stress and material degradation were consequently discussed to demonstrate that we must avoid a simple knock-down factor or 40% devastating penalty and use more rational simulation and supporting data.

Keywords

transient moisture concentration hygrothermal residual stress equivalent moisture diffusion method master curves.

Get full access to this article

View all access options for this article.

References

Springer, G.S. ( 1981). Environmental Effects on Composite Materials, Technomic Publishing Co, West Port, USA.

Shen, C.H. and Springer, G.S. ( 1976). Moisture Absorption and Desorption of Composite Materials , Journal of Composite Materials, 10: 2-20.

Springer, G.S. (1977). Moisture Content of Composites Under Transient Conditions, Journal of Composite Materials , 11: 107-123.

Loos, A.C. and Springer, G.S. ( 1979). Moisture Absorption of Graphite-Epoxy Composites Immersed in Liquids and in Humid Air, Journal of Composite Materials , 13: 131-147.

Hahn, H.T. and Kim, R.Y. ( 1978). Swelling of Composite Laminates, Advanced Composite Materials-Environmental Effects, In: Vinson, J.R. (ed.), Advanced Composite Materials- Environmental Effects, ASTM STP 658, pp. 98-120, American Society for Testing and Materials, Philadelphia, PA.

Nakada, M. and Miyano, Y. ( 2009). Accelerated Testing for Long-term Fatigue Strength of Various FRP Laminates for Marine Use, Composites Science and Technology, 69: 805-813.

Guedes, R.M. , Sa, A. and Faria, H. (2007). Influence of Moisture Absorption on Creep of GRP Composite Pipes, Polymer Testing , 26: 595-605.

Benkeddad, A. , Grediac, M. and Vautrin, A. (1996). Computation of Transient Hygroscopic Stresses in Laminated Composite Plates, Composites Science and Technology, 56: 869-876.

Crank, J. ( 1975). The Mathematics of Diffusion, Clarendon Press, Oxford.

10.

Pennington, J.C. and Meyer, E.C. (1979). Research, Development, Test and Evaluation of Material for Extreme Climatic Conditions, Army Regulation 70-38.

11.

Tsai, S.W. and Hahn, H.T. ( 1980). Introduction to Composite Materials, CRC Press, Boca Raton, FL.