Delamination buckling and growth phenomena in stiffened composite panels under compression. Part I: An experimental study

Abstract

An experimental investigation has been carried out on skin delaminations buckling and growth phenomena in stiffened composite panels subjected to compression loading. Optical fibers have been used to monitor the delamination-related phenomena. The optical fibers have been embedded in the skin close to an artificial delamination following paths with minimum length, satisfying the grating sensor locations and direction requirements and fulfilling specific embedding/integrity constraints. The stiffened panel has been also instrumented with back-to-back strain gauges in skin and stringer locations to acquire additional information on delamination and panel buckling and on delamination growth. Finally, a lock-in thermography inspection activity has been performed at different levels of the applied compressive load to acquire information on the delamination buckling and growth shapes. The performed experimental activity was aimed to study the delamination-related phenomena by comparing experimental data obtained from different sources focusing on delamination growth initiation and delamination growth stability.

Keywords

Layered structures delamination mechanical testing optical fibers monitoring

Get full access to this article

View all access options for this article.

References

Staszewski

Boller

Tomlinson

. Health monitoring for aerospace structures, Chichester, UK: Wiley, 2004.

Takeda

Okabe

Mizutani

. Damage detection in composites using optical fibre sensors. Proc IMechE, Part G: J Aerospace Eng 2007; 221: 497–508.

Van Steenkiste

Springer

. Strain and temperature measurement with fiber optic sensors, Lancaster, PA: Technomic, 1997.

Mrad N. Optical fiber sensor technology: introduction and evaluation and application. In: Schwartz M (ed.) Encyclopedia of smart materials. Vol. 2. New York: John Wiley & Sons, Inc., 2002, pp.715–737.

Frieden

Cugnoni

Botsis

. Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – part I: impact detection and localization. Compos Struct 2012; 94: 438–445.

Frieden

Cugnoni

Botsis

. Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – part II: damage identification. Compos Struct 2012; 94: 593–600.

Leblanc

Measures

. Impact damage assessment in composite materials with embedded fibre-optic sensors. Compos Eng 1992; 2: 513–596.

Takeda

Minakuchi

OkabeY . Delamination monitoring of laminated composites subjected to low-velocity impact using small-diameter FBG sensors. Compos A 2005; 36: 903–908.

Takeda

Okabe

Takeda

. Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors. Compos A 2002; 33: 971–980.

10.

Rong

Wang

. Detection of delamination in a composite material based on the measurement of static strain using a surface-mounted fiber Bragg grating sensor. Opt Eng 2011; 50: 014404–014404.

11.

Ling

Lau

Cheng

. Utilization of embedded optical fibre sensors for delamination characterization in composite laminates using a static strain method. Smart Mater Struct 2005; 14: 1377–1386.

12.

Ogisu T, Shimanuki M, Kiyoshima S, et al. Damage growth detection of composite laminate using embedded FBG sensor/PZT actuator hybrid system. In Proceedings of SPIE (Smart structures and materials: smart sensor technology and measurement systems), Bellingham, WA, 2005; Vol. 5758: DOI: 10.1117/12.598085.

13.

Takeda

Aoki

Nagao

. Damage monitoring of CFRP stiffened panels under compressive load using FBG sensors. Compos Struct 2012; 94: 813–819.

14.

Riccio

Di Caprio

Camerlingo

. Position of embedded optical fibres sensors for the monitoring of buckling in stiffened composite panels. Appl Compos Mater 2013; 20: 73–86.

15.

Busse

Karpen

. Thermal wave imaging with phase sensitive modulated thermography. J Appl Phys 1992; 7: 3962–3965.

16.

Maldague

. Nondestructive evaluation of materials by infrared thermography, New York: Springer, 1993.

17.

Toscano C, Riccio A, Camerlingo F, et al. Lockin thermography to monitor propagation of delamination in CFRP composites during compression tests. In: Proceedings of the 11th quantitative infrared thermography, Naples, Italy, 11–14 June 2012.