Thermo-mechanical properties of graphite-reinforced high-density polyethylene composites and its structure

Abstract

Composite prepared by mixing of different forms of carbon or other reinforcing fillers with polymer, is one of the possible ways to enhance the performance of polymeric materials. The present work focuses on the study of viscoelastic, thermal, electrical and mechanical properties of graphite flake-reinforced high-density polyethylene composites. The composites are processed by melt mixing using vertical twin-screw micro-compounder followed by final sample preparation via micro injection moulding. The reinforcing filler, graphite flake, is varied from 0 to 50 vol.% with respect to the polymer matrix. Dynamic mechanical thermal analysis reveals an increase in the storage modulus (E′) as well as loss modulus (E″) throughout the temperature range; however, damping (tan δ) shows a mixed behaviour. There is 550% and 479% increase of E′ and E″ in the rubbery region. Degree of entanglement, reinforcement efficiency and C factor are also calculated and correlated with the mechanical properties. On comparison, high-density polyethylene /graphite flake composite having 50 vol.% graphite flake with pure high-bcdensity polyethylene shows 52% increase in melt viscosity, whereas bulk density increases by 38%. This graphite flake is also responsible for the increase in the thermal stability (shift in the onset degradation temperature of ∼7℃ and the degradation temperature is more than 400℃), thermal conductivity (175% improvement) and electrical conductivity (∼6125% improvement, as the conductivity of pristine high-density polyethylene is ∼9.67 E-08 S/m). Mechanical properties determined by tensile and flexural tests show an initial increase and then a slight decrease in the tensile and flexural strength. Therefore, the graphite flake-reinforced high-density polyethylene composite with improved thermal conductivity, electrical conductivity, heat stability, viscoelastic behaviour and flexural modulus can be a promising as well as suitable composite material for making of various electronic and electrical accessories including bipolar plate for fuel cell applications.

Keywords

Composite high density polyethylene graphite flake dynamic mechanical thermal analysis thermal conductivity mechanical properties electrical conductivity

Get full access to this article

View all access options for this article.

References

Kar

Pandey

Rana

. Handbook of polymer nanocomposites. Processing, performance and application: volume B: carbon nanotube based polymer composites, New York, NY: Springer, 2014.

Kar

Hodzic

. Development in nanocomposite, Singapore: Research Publishing Services, 2014.

Gautam

Banerjee

Kar

. Bipolar plate materials for proton exchange membrane fuel cell application. Recent Pat Mater Sci 2015; 8: 15–45.

Rek

Vranješ

Šlouf

. Morphology and properties of SEBS block copolymer compatibilized PS/HDPE blends. J Elastomers Plast 2008; 40: 237–251.

Jayasree

Predeep

. Effect of fillers on mechanical properties of dynamically crosslinked styrene butadiene rubber/high density polyethylene blends. J Elastomers Plast 2008; 40: 127–146.

Paik

Kar

. Thermal degradation kinetics and estimation of lifetime of polyethylene particles: effects of particle size. Mater Chem Phys 2009; 113: 953–961.

Dusunceli

Aydemir

. The effects of loading history and manufacturing methods on the mechanical behavior of high-density polyethylene. J Elastomers Plast 2011; 43: 451–468.

Chunzheng

. The effect of surface coating of CNTs on the mechanical properties of CF-filled HDPE composites. Surf Interf Anal 2015; 47: 357–361.

Yesil

Bayram

. Effect of carbon nanotube surface treatment on the morphology, electrical, and mechanical properties of the microfiber-reinforced polyethylene/poly(ethylene terephthalate)/carbon nanotube composites. J Appl Polym Sci 2013; 127: 982–991.

10.

Pöllänen

Pirinen

Suvanto

. Influence of carbon nanotube–polymeric compatibilizer masterbatches on morphological, thermal, mechanical, and tribological properties of polyethylene. Compos Sci Technol 2011; 71: 1353–1360.

11.

Tavman

Krupa

Omastova

. Effects of conductive graphite filler loading on physical properties of high-density polyethylene composite. Polym Compos 2012; 33: 1071–1076.

12.

Sarikanat

Sever

Erbay

. Preparation and mechanical properties of graphite filled HDPE nanocomposites. Arch Mater Sci Eng 2011; 50: 120–124.

13.

Luo

Cheng

Zhou

. Thermal, electrical and rheological behavior of high-density polyethylene/graphite composites. Iran Polm J 2015; 24: 573–581.

14.

C-M

Shentu

B-Q

Weng

Z-X

. Thermal conductivity of high density polyethylene filled with graphite. J Appl Polym Sci 2006; 101: 3806–3810.

15.

Weng

W-G

Chen

G-H

D-J

. HDPE/expanded graphite electrically conducting composite. Comps Interf 2004; 11: 131–143.

16.

Monte

Sugerman

. Increased productivity of thermoplastics using organometallic titanate and zirconate coupling agents. J Elastomers Plast 1990; 22: 83–96.

17.

Ghazanfari

Emami

Panigrahi

. Thermal and mechanical properties of blends and composites from HDPE and Date Pits particles. J Compos Mater 2008; 42: 77–89.

18.

Liang

J-Z

Yang

Q-Q

. Mechanical properties of carbon black-filled high-density polyethylene antistatic composites. J Reinf Plast Compos 2008; 28: 295–304.

19.

Huang

Lee

. High density polyethylene composites reinforced with hybrid inorganic fillers: morphology, mechanical and thermal expansion performance. Materials 2013; 6: 4122–4138.

20.

Rochette

Bousmina

Lavoie

. Effect of surface treatment on mechanical properties of polyethylene composite. J Compos Mater 2002; 36: 925–940.

21.

Satapathy

Nando

Nag

. Dynamic mechanical analysis of electron beam irradiated waste polyethylene and its blends with virgin high density and low density polyethylene. J Elastomers Plast 2011; 43: 33–48.

22.

Siengchin

. Impact, thermal and mechanical properties of high density polyethylene/flax/SiO2 composites: effect of flax reinforcing structures. J Reinf Plast Compos 2012; 31: 959–966.

23.

Elleithy

Ali

Al-haj Ali

. Different factors affecting the mechanical and thermo-mechanical properties of HDPE reinforced with micro-CaCO3. J Reinf Plast Compos 2011; 30: 769–780.

24.

Fouad

Elleithy

Al-Zahrani

. Characterization and processing of high density polyethylene/carbon nano-composites. Mater Des 2011; 32: 1974–1980.

25.

Akchurin

Liu

. Mechanical properties, tribological behavior, and biocompatibility of high-density polyethylene/carbon nanofibers nanocomposites. J Compos Mater 2015; 49: 1503–1512.

26.

Planes

Gloaguen

Flandin

. Optimizing formulations of polymer composite with high filler content: application to bipolar plate. Compos Sci Technol 2015; 110: 17–25.

27.

Wang

Gao

Wang

. Mechanical and rheological properties of HDPE/graphite composite with enhanced thermal conductivity. Polym Compos 2001; 22: 97–97.

28.

Chrissafis

Paraskevopoulos

Tsiaoussis

. Comparative study of the effect of different nanoparticles on the mechanical properties, permeability, and thermal degradation mechanism of HDPE. J Appl Polym Sci 2009; 114: 1606–1618.

29.

Bhattacharya

Tandon

Sachdev

. Electrical conduction of graphite filled high density polyethylene composites; experiment and theory. J Mater Sci 2009; 44: 2430–2433.

30.

Guo

Liu

. Preparation and properties of cotton stalk bundles and high-density polyethylene composites using hot-press molding. J Reinf Plast Compos 2012; 31: 1017–1024.

31.

Katančić

Kratofil Krehula

Ptiček Siročić

. Effect of modified nanofillers on fire retarded high-density polyethylene/wood composites. J Compos Mater 2013; 0: 1–13.

32.

Kaboorani

. Effects of formulation design on thermal properties of wood/thermoplastic composites. J Compos Mater 2010; 44: 2205–2215.

33.

Razi

Raman

Portier

. Studies on mechanical properties of wood-polymer composites. J Compos Mater 1997; 31: 2391–2401.

34.

Sewda

Maiti

. Effect of bark flour on viscoelastic behavior of high density polyethylene. J Compos Mater 2011; 45: 1007–1016.

35.

Zabihzadeh

Dastoorian

Ebrahimi

. Tensile properties and thermal analysis of chemimechanical pulp-reinforced HDPE composites. J Reinf Plast Compos 2010; 29: 1814–1819.

36.

Oommen

Groeninckx

Thomas

. Dynamic mechanical and thermal properties of physically compatibilized natural rubber/poly(methyl methacrylate) blends by the addition of natural rubber-graft- poly(methyl methacrylate). J Polym Sci Part B: Polym Phys 2000; 38: 525–536.

37.

Einstein

. Investigations on the Theory of the Brownian Movement, USA: Dover Publications Inc, 1956.

38.

Pothan

Oommen

Thomas

. Dynamic mechanical analysis of banana fiber reinforced polyester composites. Compos Sci Technol 2003; 63: 283–293.

39.

John

Varughese

Oommen

. Dynamic mechanical behavior of high-density polyethylene/ethylene vinyl acetate copolymer blends: the effects of the blend ratio, reactive compatibilization, and dynamic vulcanization. J Appl Polym Sci 2003; 87: 2083–2099.

40.

Pandey

Kumar

Kachhavah

. Mechanical and thermal behaviours of graphite flake reinforced acrylonitrile butadiene styrene composites and their correlation with entanglement density, adhesion, reinforcement and C factor. RSC Adv 2016; 6: 50559–50571.

41.

Menard

. Dynamic mechanical analysis: a practical introduction, USA: CRC Press, 2008.

42.

Luo

Lloyd

. Enhancement of thermal energy transport across graphene/graphite and polymer interfaces: a molecular dynamics study. Adv Funct Mater 2012; 22: 2495–2502.

43.

Liu

Zhang

. Investigation of the electrical conductivity of HDPE composites filled with bundle-like MWNTs. Compos Part A 2009; 40: 1717–1721.

44.

Haggenmueller

Guthy

Lukes

. Single wall carbon nanotube/polyethylene nanocomposites: thermal and electrical conductivity. Macromolecules 2007; 40: 2417–2421.

45.

Yui

Sano

. Morphology and electrical conductivity of injection-molded polypropylene/carbon black composites with addition of high-density polyethylene. Polymer 2006; 47: 3599–3608.

Thermo-mechanical properties of graphite-reinforced high-density polyethylene composites and its structure–property corelationship

Abstract

Keywords

Get full access to this article

References