An innovative deicing system for aircraft leading edges has been developed which integrates heater elements into fibre metal laminates. Such an electrical system can lead to weight reductions and more efficient performances compared to conventional bleed air systems. However, the combination of thermal and mechanical loadings also raises new questions on the durability of such a structure, in particular due to the repeated heating to elevated temperature. The linear viscoelastic creep behaviour, including the effects of temperature and ageing, is therefore investigated for manufactured FM906 glass-fibre epoxy composite as used in heated GLARE. A master curve is derived based on the time–temperature and time–age superposition. The effect of physical ageing during loading is included in a long-term creep prediction.
VermeerenCAJRBeumlerTHDe KanterJLCG, et al.Glare design aspects and philosophies. Appl Compos Mater2003; 10: 257–276.
2.
Airbus Industrie. Flight operations support. Cold weather operations, 2000.
3.
Federal Aviation Administration (FAA). Airplane and engine certification requirements in supercooled large drop, mixed phase and ice crystal icing conditions. Federal Regist2010; 75: 37311–37339.
4.
MohseniMAmirfazliA. A novel electro-thermal anti-icing system for fiber-reinforced polymer composite airfoils. Cold Regions Sci Technol2013; 87: 47–58.
5.
Vlot A and Gunnink JW (eds). Fibre metal laminates: an introduction. Dordrecht, The Netherlands: Kluwer Academic Publishers, 2001.
6.
Hagenbeek M. Characterisation of fibre metal laminates under thermo-mechanical loadings. PhD Thesis, TU Delft, Delft, Netherlands, 2005.
7.
Pacchione M and Telgkamp J. Challenges of the metallic fuselage. In: Proceedings of the 25th international congress of the aeronautical sciences (ICAS), Hamburg, Germany, 3–8 september 2006.
8.
MüllerBHagenbeekMSinkeJ. Thermal cycling of (heated) fibre metal laminates. Compos Struct2016; 152: 106–116.
9.
HagenbeekMMüllerBSinkeJ. Effect of thermal cycling and ageing on heated fibre metal laminates and glass-fibre epoxy composites. Adv Eng Mater2018.DOI: 10.1002/adem.201800084.
10.
PinderaMJWilliamsTOMacheretY. Time-dependent response of aramid-epoxy-aluminium sheet ARALL laminates. Polym Compos1989; 10: 328–336.
11.
DaghighVKhaliliSMRFarsaniRE. Creep behavior of basalt fiber-metal laminate composites. Compos Part B2016; 91: 275–282.
12.
OdegardGMBandyopadhyayA. Physical aging of epoxy polymers and their composites. J Polym Sci Part B2011; 49: 1695–1716.
13.
Ward IM and Hadley DW. Experimental studies of linear viscoelastic behavior as a function of frequency and temperature: time-temperature equivalence. In: IM Ward and J Sweeney (eds) An introduction to the mechanical properties of solid polymers. Hoboken, NJ: John Wiley & Sons Ltd, 2004, pp.95–120.
14.
ASTM D3518. Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a ±45laminate. West Consohohocken: ASTM Standards, 2013.
15.
StruikLCE. Physical aging in amorphous polymers and other materials, 1st ed. Amsterdam: Elsevier Science Ltd, 1978.
16.
SullivanJL. Creep and physical aging of composites. Compos Sci Technol1990; 39: 207–232.
17.
GatesTSVeazieDRBrinsonLC. Creep and physical aging in a polymeric composite: comparison of tension and compression. J Compos Mater1997; 31: 2478–2505.
18.
GoertzenWKKesslerMR. Creep behavior of carbon fiber/epoxy matrix composites. Mater Sci Eng A2006; 421: 217–225.
19.
BarberoEJ. Prediction of long-term creep of composites from doubly-shifted polymer creep data. J Compos Mater2009; 43: 207–232.
20.
BarberoEJTime temperature age superposition principle for predicting long-term response of linear viscoelastic materials. In: GuedesRM (ed). Creep and fatigue in polymer matrix composites, 1st ed. Sawston, UK: Woodhead Publishing, 2011, pp. 48–69. Vol. 15.
21.
Motta Dias MH, Jansen KMB, Luinge H, et al. The Influence of fiber-matrix adhesion on the linear viscoelastic creep behavior of CF/PPS composites. In: 1st international conference on ageing of materials and structures, Delft, The Netherlands, 26–28 May 2014.
22.
Motta DiasMHJansenKMBLuingeJW, et al.Effect of fiber-matrix adhesion on the creep behavior of CF/PPS composites: temperature and physical aging characterization. Mech Time Depend Mater2016; 20: 245–262.
23.
Jansen KMB. Thermomechanical modeling and characterization of polymers. Modelling of thermoviscoelasticity and non-linearities [Course book]. 1st ed. Netherlands: Delft University of Technology, pp.81–98.
24.
HutchinsonJM. Physical aging of polymers. Prog Polym Sci1995; 20: 703–760.
25.
PapanicolaouGCZaoutsosSPViscoelastic constitutive modeling of creep and stress relaxation in polymers and polymer matrix composites. In: GuedesRM (ed). Creep and fatigue in polymer matrix composites, 1st ed. Cambridge: Woodhead Publishing, 2011, pp. 1–47.
26.
TomlinsPEReadBE. Creep and physical ageing of polypropylene: a comparison of models. Polymer1998; 39: 355–367.
27.
KohlrauschR. Theorie des elektrischen Rckstandes in der Leidener Flasche. Ann Phys1854; 167: 179–214.
28.
WilliamsGWattDC. Non-symmetrical dielectric relaxation behaviour arising from a simple empirical decay function. Trans Faraday Soc1969; 66: 80–85.
29.
Vreugd J de. The effect of aging on molding compound properties. Doctoral Thesis, Delft University of Technology, Delft, Netherlands, 2011.
30.
Hagenbeek M. Estimation tool for basic material properties (ETMP). Technical Report B2v-00-29. Delft, The Netherlands: Delft Faculty of Aerospace Engineering, University of Technology, 2000.
