A variety of discontinuous fiber composite laminate layouts were designed to satisfy special structural needs. Corresponding composite tensile coupons having preset interleaving ply were tested to measure their strength and rigidity. The experimental results show the strength of the interleaving ply composite is significantly lower than that of the continuous one, whereas it has comparable rigidity. The internal load transferring mechanism was suggested to analyze the main factors affecting the ultimate tensile strength. Based on it, a statistical relationship has been built to reflect the dependence of the strength to the interleaving length.
AhamedJJoostenMCallusP, et al.Ply-interleaving technique for joining hybrid carbon/glass fibre composite materials. Appl Sci Manuf2016; 84: 134–146.
2.
AhamedJJoostenMCallusP, et al.Ply-interleaving technique for joining hybrid carbon/glass fibre composite materials. Comp Part A, Appl Sci Manuf2016; 84: 134–146.
3.
CzélGJalalvandMWisnomMR. Design and characterization of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy–glass/epoxy hybrid composites. Compos Struct2016; 143: 362–370.
4.
CzélGJalalvandMWisnomMR, et al.Design and characterisation of high performance, pseudo-ductile all-carbon/epoxy unidirectional hybrid composites. Compos B Eng2017; 111: 348–356.
5.
YuHNLonganaMLJalalvandM, et al.Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres. Comp Part A. Appl Sci Manuf2015; 73: 35–44.
6.
BendemraHCompstonPCrothersPJ. Optimisation study of tapered scarf and stepped-lap joints in composite repair patches. Compos Struct2015; 130: 1–8.
7.
JalalvandMCzélGWisnomMR. Numerical modelling of the damage modes in UD thin carbon/glass hybrid laminates. Compos Sci Technol2014; 94: 39–47.
8.
BaucomJNThomasJPPogueWR, et al.Tiled composite laminates. J Compos Mater2010; 44: 3115–3132.
9.
CamanhoPPDavilaCGde MouraMF. Numerical simulation of mixed-mode progressive delamination in composite materials. J Compos Mater2003; 37: 1415–1438.
10.
HashimotoMOkabeTSasayamaT, et al.Prediction of tensile strength of discontinuous carbon fiber/polypropylene composite with fiber orientation distribution. Appl Sci Manuf2012; 43(10): 1791–1799.
11.
AnielloRCaprioFDTsaiSW, et al.Optimization of composite aeronautical components by re-designing with double-double laminates. Aero Sci Technol2024; 151: 109304.
12.
GarofanoASellittoAAcanforaV, et al.On the effectiveness of double-double design on crashworthiness of fuselage barrel. Aero Sci Technol2023; 140: 108479.
13.
TsaiMYMortonJ. The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap joints. Compos Struct1995; 32(1): 123–131.
14.
KimK-SYooJ-SYiYM, et al.Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods. Compos Struct2006; 72(4): 477–485.
15.
KimK-SYiY-MChoG-R, et al.Failure prediction and strength improvement of uni-directional composite single lap bonded joints. Compos Struct2008; 82(4): 513–520.
16.
SeongM-SKimT-HNguyenK-H, et al.A parametric study on the failure of bonded single-lap joints of carbon composite and aluminum. Compos Struct2008; 86(1): 135–145.
17.
KweonJ-HJungJ-WKimT-H, et al.Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding. Compos Struct2006; 75(1): 192–198.
18.
HarmanABWangCH. Improved design methods for scarf repairs to highly strained composite aircraft structure. Compos Struct2006; 75(1): 132–144.
19.
YooJ-STruongV-HParkM-Y, et al.Parametric study on static and fatigue strength recovery of scarf-patch-repaired composite laminates. Compos Struct2016; 140: 417–432.
20.
AvendañoRCarbasRJCMarquesEAS, et al.Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive. Compos Struct2016; 152: 34–44.
21.
ThawreMMVermaKKJagannathanN, et al.Effect of ply-drop on fatigue life of a carbon fiber composite under a fighter aircraft spectrum load sequence. Engineering2016; 86: 120–125.
22.
AllegriGWisnomMRHallettSR. A simplified approach to the damage tolerance design of asymmetric tapered laminates. Part I: methodology development. Appl Sci Manuf2010; 41(10): 1388–1394.
23.
AllegriGWisnomMRHallettSR. A simplified approach to the damage tolerance design of asymmetric tapered laminates. Part II: methodology validation. Appl Sci Manuf2010; 41(10): 1395–1402.
24.
GiannisS. Utilising fracture mechanics principles for predicting the mixed-mode delamination onset and growth in tapered composite laminates. Compos Struct2013; 102: 294–305.
25.
ASTM D3039/D3039M-17. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. West Conshohocken, PA: ASTM International, 2017.
26.
LandisCMMcMeekingRM. A shear-lag model for a broken fiber embedded in a composite with a ductile matrix. Compos Sci Technol1999; 59(3): 447–457.
