Development and performance evaluation of sustainable 3D-Printed PLA composites reinforced with sword bean microfibers and teff straw-derived biosilica
Restricted accessResearch articleFirst published online 2026
Development and performance evaluation of sustainable 3D-Printed PLA composites reinforced with sword bean microfibers and teff straw-derived biosilica
Polylactic acid (PLA) was reinforced with glycidoxypropyltrimethoxysilane (GPTMS)-treated sword bean microfibers and teff straw-derived biosilica in sustainable hybrid composites that were created using twin-screw extrusion and fused deposition modelling. Hydrophilic reinforcements and PLA matrix interface compatibility was improved through surface treatment with GPTMS. A variety of mechanical, thermal, and water absorption tests were performed on the manufactured composites. When hybrid reinforcements were used, performance was noticeably improved. The optimal mixture of 30 vol. % microfiber and 3 vol. % biosilica (PSB2) demonstrated superior overall characteristics, yielding 126 MPa for tensile strength, 137 MPa for flexural strength, 4.55 J for impact energy, 82 Shore D for hardness, 0.45 W/mK for thermal conductivity, and 1.49 % less water absorption. The creation of an efficient hybrid reinforcement network, enhanced interfacial bonding, and uniform biosilica dispersion are the reasons behind these improvements. The constructed composites are well-suited for high-tech structural and functional uses, as the results show that they are strong, robust, thermally efficient, and moisture resistant.
SoundararajanRPraveenDPrajwalPG, et al.InInternational conference on advances in design, materials, manufacturing and surface engineering for mobility 2022 dec 23. SAE technical paper. https://doi.org/10.4271/2022-28-0496
2.
BavaliyaKJValaNSRajM, et al.A review on biodegradable composites based on poly (lactic acid) with various bio fibers. Chemical Papers2024; 78(5): 2695–2728. https://doi.org/10.1007/s11696-023-03298-x
3.
ThiyaguTTJVSPPG, et al.Effect of cashew shell biomass synthesized cardanol oil green compatibilizer on flexibility, barrier, thermal, and wettability of PLA/PBAT biocomposite films. Biomass Convers Biorefinery2023; 13(13): 11841–11851. https://doi.org/10.1007/s13399-021-01941-9
4.
ClarkeAJDicksonADowlingDP. Fabrication and performance of continuous 316 stainless steel fibre-reinforced 3D-printed PLA composites. Polymers2023; 16(1): 63. https://doi.org/10.3390/polym16010063
5.
ThillikkaniSKumarNMFrancis Luther KingM, et al. Automotive technical papers 369401. Indian acad science, 2025. https://doi.org/10.4271/2025-01-5013
6.
SathishMRadhikaNVenuvankaN, et al.A review on sustainable properties of plant fiber‐reinforced polymer composites: characteristics and properties. Polym Int2024; 73(11): 887–943. https://doi.org/10.1002/pi.6686
7.
MuhammudAMEdossaGDSabirFK. High-performance nanostructured SiO2 from Ethiopian pumice: synthesis and characterization. Front Mater2025; 12: 1566490. https://doi.org/10.3389/fmats.2025.1566490
8.
ComptonBGBuiPPRombergSK, et al.3D‐printed SiC‐microfiber‐reinforced polymer‐derived ceramic with high strength at elevated temperature. J Am Ceram Soc2025; 108(12): e70143. https://doi.org/10.1111/jace.70143
9.
ManikandanKSathishSChandrasekaranG, et al.Characterization of 3D-printed polylactic acid (PLA)–Hemp microfiber-reinforced biomedical implant composite material. Fibers Polym2025; 26(11): 5081–5091. https://doi.org/10.1007/s12221-025-01159-w
SoundarrajanKRSAS. InInternational conference on advances in design, materials, manufacturing and surface engineering for mobility 325579 2021 oct 1. https://doi.org/10.4271/2021-28-0275
13.
KogjeMMestrySMohantyJD, et al.Modification of fly ash cenospheres by 3-glycidyloxypropyl trimethoxysilane (GPTMS) for anticorrosive coating applications. Iran Polym J2025; 34(1): 83–97. https://doi.org/10.1007/s13726-024-01359-w
ArunprasandTRNallasamyP. Advancements in optimizing mechanical performance of 3d printed polymer matrix composites via microstructural refinement and processing enhancements: a comprehensive review. Mech Adv Mater Struct2025; 32(22): 5616–5634. https://doi.org/10.1080/15376494.2024.2426776
17.
MuthukrishnanKMSelvakumarGNarayanasamyP, et al.Characterization of raw and alkali treated cellulosic filler isolated from Putranjiva roxburghii W. Seed shell roadside vegetative residues. J Nat Fibers2022; 19(16): 14287–14298. https://doi.org/10.1080/15440478.2022.2061670
18.
KumarNRSoundararajanRSrinivasanR. Effect of surface-treated paddy straw biosilica additive on PET core–pineapple fiber composite subjected to water and temperature aging: a characterization study. Biomass Convers Biorefinery2025; 15(10): 15985–16001. https://doi.org/10.1007/s13399-024-06431-2
19.
ArunachalamSNSankara NarayananSMuthupandiP, et al.Development of sustainable r‐ ABS composites reinforced with waste Mucuna pruriens seed powder for enhanced 3D printing performance. Polym Adv Technol2025; 36(10): e70353. https://doi.org/10.1002/pat.70353
SrinidhiMSSoundararajanRSatishkumarKS, et al.Enhancing the FDM infill pattern outcomes of mechanical behavior for as-built and annealed PETG and CFPETG composites parts. Mater Today Proc2021; 45: 7208–7212. https://doi.org/10.1016/j.matpr.2021.02.417
22.
AlshahraniHArun PrakashVR. Load bearing investigations on novel Acrylonitrile butadiene styrene‐carbon quantum dots 3D printed core/bamboo fiber polyester sandwich composite for structural applications. Polym Compos2024; 45(4): 3081–3093. https://doi.org/10.1002/pc.27972
MatsukawaKNakatsujiHNishidaI. Automated tool-path generation for complex shapes applicable to 5-Axis indexing machining using STL-format CAD models. Int J Autom Technol2025; 19(5): 698–711. https://doi.org/10.20965/ijat.2025.p0698
27.
RanganathanSRangasamySugunaThangarajHNVasudevanAK, et al.InInternational conference on advances in design, materials, manufacturing and surface engineering for mobility 287424, 2019. https://doi.org/10.4271/2019-28-0137
28.
LiuZWangJHeG, et al.Engineering the thermal conductivity of polymer-bonded explosives by interfacial thermal resistance reduction and structural designs: a review. Adv Compos Hybrid Mater2025; 8(1): 16. https://doi.org/10.1007/s42114-024-01076-1
29.
MdNorSSAbdul PatahMFMat SallehM. Surface modification of bio-based composites via silane treatment: a short review. J Adhes Sci Technol2023; 37(5): 801–816. https://doi.org/10.1080/01694243.2022.2049087
30.
KhanMKAlshahraniHArun PrakashVR. Effect of grid pattern and infill ratio on mechanical, wear, fatigue and hydrophobic behaviour of abaca bracts biocarbon-ABS biocomposites tailored using 3D printing. Biomass Convers Biorefinery2025; 15(3): 3915–3924. https://doi.org/10.1007/s13399-023-05196-4
31.
EkanayakeGWijayawardanaSJayanettiM, et al.In vitro release kinetics of bioactive compounds (gallic acid, ellagic acid, and eugenol) from chitosan polymer and the bioactivity of herb-loaded chitosan-CuO nanocomposites. Sci Rep2025; 15(1): 35743. https://doi.org/10.1038/s41598-025-19914-7
32.
NathanVBSoundararajanRGandhiBS, et al.Mechanical, wear, fatigue, and water absorption behavior of epoxy biocomposite toughened using marine waste Sepioteuthis sepioidea pen chitosan biopolymer and pineapple plain-weaved fiber. Biomass Convers Biorefinery2025; 15(5): 6699–6712. https://doi.org/10.1007/s13399-024-05762-4
33.
KhanMKAFaisalMArun PrakashVR. Damage investigations on natural fiber-epoxy human prosthetic composites toughened using echinoidea spike β-chitin biopolymer. Biomass Conv. Bioref2025; 15: 6175–6185. https://doi.org/10.1007/s13399-024-05421-8
34.
AlshahraniHPrakashVRA. Characterisation of nanocellulose from waste pisum sativum sheath and its sunn hemp fibre-polyester composite: a step towards valorisation of biomass. Waste Biomass Valor2025; 16: 1999–2010. https://doi.org/10.1007/s12649-024-02794-9
35.
SMKSaravananIRajesh KannanS, et al.Load bearing performance of alkali-silane-treated pineapple fiber and polyethylene terephthalate core-reinforced sandwich composite for building applications. Waste Biomass Valor2026; 17: 2949–2959. https://doi.org/10.1007/s12649-025-03225-z
