A New Compression Test Method for Thick Composites

Abstract

A test method was developed for determination of compressive properties of thick composite materials. A new fixture was designed and built based on the concept of transmitting the initial load through the tabs by shear loading and thereafter engaging the ends to apply the additional load to failure by end loading. This fixture was used to measure the longitudinal compressive properties of thick composite materials. It is shown that longitudinal compressive strengths of 1660 MPa (240 ksi) are obtainable experimentally for thick composites. Several factors were found to affect the results of these compression tests. They include alignment, specimen geometry, stress concentrations, specimen end-crushing, and timing of end-loading engagement.

Keywords

thick composites compression testing test methods compressive strength carbon/epoxy graphite/epoxy

Get full access to this article

View all access options for this article.

References

1. Whitney, J. M. , I. M. Daniel and R. B. Pipes . 1985. Experimental Mechanics of Fiber Reinforced Composite Materials, Bethel, CT: Soc. for Exper. Mech.; Englewood Cliffs, NJ: Prentice Hall.

2. Berg, J. S. and D. F. Adams . 1989. "An Evaluation of Composite Material Compression Test Methods," J. Composites Technology and Research, 11(2):41-46.

3. Camponeschi, Jr., E. T. 1991. "Compression of Composite Materials: A Review," Composite Materials: Fatigue and Fracture, ASTM STP 1110, pp. 550-578.

4. Adsit, N. R.

"Compression Testing of Graphite/Epoxy,"

Compression Testing of Homogeneous Materials and Composites, ASTM STP 808, pp. 175-186.

5. Hofer, Jr., K. E. and P. N." Rao . 1977. "A New Static Compression Fixture for Advanced Composite Materials," J. Testing and Evaluation, 5(4):278-283.

6. Haberle, J. G. and F. L. Matthews . 1994. "An Improved Technique for Compression Testing of Unidirectional Fibre-Reinforced Plastics; Development and Results," Composites, 25:358-371.

7. Camponeschi, Jr., E. T. 1991. "Compression Testing of Thick-Section Composite Materials," Composite Materials: Fatigue and Fracture, ASTM STP 1110, pp. 439-456,

8. Daniel, I. M. , H.-M. Hsiao , S. C. Wooh and J. Vittoser . 1993. "Processing and Compressive Behavior of Thick Composites," Mechanics of Thick Composites, the 1st Joint Mechanics Meeting of ASME/ASCE/SES, Charlottesville, VA, June 6-9, AMD-162:107-126.

9. Montiel, D. M. and C. J. Williams . 1992. "A Method for Evaluating the High Strain Rate Compressive Properties of Composite Materials," Composite Materials: Testing and Design, ASTM STP 1120, pp. 54-65.

10.

10. Lamothe, R. M. and J. Nunes . 1983. "Evaluation of Fixturing for Compression Testing of Metal Matrix and Polymer/Matrix Composites," in Compression Testing of Homogeneous Materials and Composites, ASTM STP 808, pp. 241-253.

11.

11. Shuart, M. J. 1989. "Failure of Compression-Loaded Multidirectional Composite Laminates," AIAA J., 27(9):1274-1279.

12.

12. Kim, R. Y. and A. S. Crasto . 1992. "A Longitudinal Compression Test for Composites Using a Sandwich Specimen," J. Composite Materials, 26(13):1915-1929.