Co-Cured Extension-Twist Coupled Damped Composite Strut

Abstract

A co-cured damped composite strut that uses the extension-shear coupling mechanism of off-angle composite material to enhance the damping performance of a viscoelastic damping material is presented. The damping material was placed between two graphite shells. Composite material replaced the damping material at each strut end. The inner shell contains plies oriented at a positive ply angle in the first half of the strut length and plies oriented at a negative ply angle in the second half. Due to the extension-shear coupling, the shell center section rotates when the strut undergoes extension deformation. The induced torque of each shell cancel each other so that there is a negligible net twist at each strut end. The outer shell plies are oriented in the opposite manner so that the outer shell center rotates in the opposite direction. The relative rotation at the strut center between the two shells places the damping material into shear, providing damping. Finite element analysis was used to determine optimal damping material shear modulus and ply orientation to maximize strut imaginary stiffness. Modal tests were performed on undamped and damped struts. Damping increased by factors of 6.2, 12.8, and 29.3 for first bending, extension, and torsion modes, respectively, over the undamped strut. Corresponding strut bending, extension, and torsion stiffness decreased by 50, 14, and 50%, respectively.

Keywords

passive damping composite materials viscoelastic materials vibration suppression

Get full access to this article

View all access options for this article.

References

1. Ross, D. , Ungar, E. E. and Kerwin, Jr., E. M. "Damping of Flexural Vibrations by Means of Viscoelastic Laminae," Section III, Structural Damping ASME, New York, New York. 1959.

2. Ditaranto, R. A. and Blasingame, W. , "Composite Damping of Vibrating Sandwich Beams," Journal of Engineering for Industry, November 1967, pp. 633-638.

3. Rogers, L. C. , Johnson C. D. and Keinholz, D. A. , "The Modal Strain Energy Finite Element Method and its Application to Damped Laminated Beams," 51st Shock and Vibration Symposium, San Diego, CA, October 21-23. 1980.

4. Johnson, C. D. , Keinholz, D. A. and Parekh, J. C. , "Design Methods for Viscoelastically Damped Plates," Proc. of the 24th Structures, Structural Dynamics, and Material Conference, Lake Tahoe, Nevada, Part 2, 1983, pp. 334-343.

5. Aerospace Structures Technology Damping Design Guide. Air Force Report AFWAL TR-84-3089.

6. Nashif, A. D. , Jones, D. I. G. and J. P. Henderson , 1985, Vibration Damping, John Wiley and Sons, Inc. New York.

7. Zinoviev, P. A. and Ermakov, Y. N. , Energy Dissipation in Composite Materials, Technomic. Lancaster, PA, 1994.

8. Hashin, Z. , "Viscoelastic fiber reinforced material," AIAA Journal, 4, pp. 1411-1417, 1966.

9. Roscoe, R. , "Bounds for the real and imaginary parts of the dynamic moduli of composite viscoelastic systems," J. Mech. Phys. Solids, Vol. 17. pp. 17-22, 1969.

10.

10. Gibiansky, L. and Milton, G. W. , "On the effective viscoelastic moduli of two phase media: I. Rigorous bounds on the complex bulk modulus," Proceedings of the Royal Society of London, 440, pp. 163-188, 1993.

11.

11. Gibiansky, L. and Lakes, R. S.

"Bounds on the complex bulk modulus of a two phase viscoelastic composite with arbitrary volume fractions of the components,"

Mechanics of Material, Vol. 16, pp. 317-331, 1993.

12.

12. Bronowecki, A. J. and Diaz, H. P. , "Analysis, Optimization, Fabrication and Test of Composite Shells with Embedded Viscoelastic Layers," Proceedings of Damping '89, West Palm Beach, Florida, pp. GCA-1, 1989.

13.

13. Barrett, D. J. , "A Design for Improving the Structural Damping Properties of Axial Members," Proceedings of Damping '89, West Palm Beach, Florida, pp. HCB-1, 1989.

14.

14. Belknap, F. M. and Kosmatka, J. B. , "Vibration Suppression of Thin-Walled Composite Tubes Using Embedded Viscoelastic Layers," Proceedings of Damping '91, San Diego, California, Feb 1991, pp. HAC-1-HAC-15.

15.

15. Rotz, C. A. and Barrett, D. J. , "Cocured Damping Layers in Composite Structures,"

23rd International SAMPE Technical Conference

1991, pp. 352-363.

16.

16. Olcott, D. D. , Rotz, C. A. and Barrett, D. J.

"Improved Damping in Composite Tubes Through Stress Coupling and Co-Cured Damping Layers,"

23rd International SAMPE Technical Conference

1991, pp. 373-387.

17.

17. Olcott, D. D. , Rotz, C. A. and Eastman, P. F. ."Improved Vibration Damping in Composite Structures Using `Zig-Zag' Fibers and Embedded Viscoelastic Damping Layers," 38th International SAMPE Symposium, May 10-13, 1993.