The aim of this study was to investigate how morphology of fibers is affected by plasma during the process of decolorization by a low-pressure RF plasma (gas, treatment time, and power were varied) and atmospheric pressure industrial corona (number of passages and power). CIE LAB colorimetric system was used for determination of color difference between untreated and differently plasma-treated denim fabrics. Particular emphasis was put on the morphological changes induced by plasma treatment, because they indicate changes in mechanical properties of the fabrics. The morphology of plasma-treated fibers was analyzed by scanning electron microscopy (SEM). SEM images revealed that, when plasma conditions that lead to a decolorization were chosen, specific fiber surface changes were always observed in the form of submicrometer-sized striations, pits, and cracks. Mechanical properties of denim fabrics were moderately influenced by treatment conditions. The results indicated that decolorization was highly affected by plasma parameters and desired `worn look' effects could be designed by adequate control of plasma processing while paying attention to limiting the plasma-induced damage.
"Plasma Technologies for Textiles," (R. Shishoo , Ed.), Wood-head Publishing Limited, Shishoo Consulting AB, Sweden (2007).
2.
Ueda, M., and Tokino, S., Physico-chemical Modifications of Fibres and Their Effect on Colouration and Finishing, Rev. Prog. Colouration26, 9-18 (2000).
3.
Wakida, T., and Tokino, S., Surface Modification of Fibre and Polymer Materials by Discharge Treatment and Its Application to Textile Processing, IndianJ. Fibre Textile Res. 21, 69-78 (1996).
4.
Ryu, J., Wakida, T., and Tokagishi, T., Effect of Corona Discharge on the Surface of Wool and Its Application to Printing , Textile Res. J. 61, 595-601 (1991).
5.
Wakida, T., Lee, M., Sato, Y., Ogasawara, S., Ge, Y., and Niu, S., Dyeing Properties of Oxygen Low-temperature Plasma Treated Wool and Nylon 6 Fibres with Acid and Basic Dyes, J. Soc. Dyers Colour. 112, 233-236 (1996).
6.
Thomas, H., and Höcker, H., Plasma Treatment of Wool with Special Regard to the Dyeing Properties, In "Proceedings of the 9th International Wool Textile Research Conference,"Biella, Italy, pp. 351-357 (1995).
7.
Hesse, A., Thomas, H., and Höcker, H., Zero-AOX Shrink-proofing Treatment for Wool Top and Fabric - Part I: Glow Discharge Treatment, Textile Res. J. 65, 355-361 (1995).
8.
Rakowski, W. , Plasmamodifizierung der Wolle unter Industriellen Bedingungen, (Plasma Modification of Wool under Industrial Conditions)Melliand Textilber. 10, 780-785 (1989).
9.
Wong, K.K., Tao, X.M., Yuen, C.W.M., and Yeung, K.W., Effect of Plasma and Subsequent Enzymatic Treatments on Linen Fabrics, J. Soc. Dyers Colour. 116, 208-214 (2000).
10.
Yoon, N.S., Lim, Y.J., Tahara, M., and Takagishi, T., Mechanical and Dyeing Properties of Wool and Cotton Fabrics Treated with Low Temperature Plasma and Enzymes, Textile Res. J. 66, 329-336 (1996).
11.
Tsai, P.P., Roth, J.R., and Chen, W.W., Strength, Surface Energy, and Ageing of Meltblown and Electrospun Nylon and Polyurethane (PU) Fabrics Treated by One Atmosphere Uniform Glow Discharge Plasma (OAUGDP), Textile Res. J. 75, 819-825 (2005).
12.
Tsai, P.P., Chen, W.W., and Roth, J.R., Investigation of the Fiber, Bulk, and Surface Properties of Meltblown and Electrospun Polymeric Fabrics, Int. Nonwovens J. 13, 17-23 (2004).
13.
Roth, J.R., Chen, Z., and Tsai, P.P., Treatment of Metals, Polymer Films and Fabrics with a One Atmosphere Uniform Glow Discharge Plasma (OAUGDP) for Increased Surface Energy and Directional Etching, Acta Metall. Sin. 14, 391-407 (2001).
14.
Tsai, P., Wadsworth, L., and Roth, J.R., Surface Modification of Fabrics Using a One-atmosphere Glow Discharge Plasma to Improve Fabric Wettability, Textile Res. J. 67, 359-369 (1997).
15.
De Geyter, N., Morent, R., and Leys, C., Penetration of a Dielectric Barrier Discharge Plasma into Textile Structures at Medium Pressure, Plasma Sources Sci. Technol. 15, 78-84 (2006).
16.
Radetić, M., Jocić, D., Jovančić , P., Trajković, R., and Petrović, Z. Lj., The Effect of Low-temperature Plasma Pre-treatment on Wool Printing, Textile Chem. Color. Am. Dyest. Rep. 32, 55- 60 (2000).
17.
Riccardi, C. , Barni, R., Fontanesi, M., Marcandalli, B., Massafra, M., Selli, E., and Mazzone, G., A SF6 RF Plasma Reactor for Research on Textile Treatment, Plasma Sources Sci. Technol. 10, 92-98 (2001).
18.
Puač, N., Petrović , Z. Lj., Radetic, M., and Ðorðević, A., Low Pressure RF Capacitively Coupled Plasma Reactor for Modification of Seeds , Polymers and Textile Fabrics, Mater. Sci. Forum494, 291-296 (2005).
19.
Ghoranneviss, M., Bahareh, M., Shahidi, S., Anvari, A., and Rashidi, A., Decolourization of Denim Fabrics with Cold Plasmas in the Presence of Magnetic Field, Plasma Process. Polym . 3, 316-321 (2006).
20.
Nourbakhsh Alizadeh, S., Yazdanshenas, M.E., Ghoranneviss, M., Mazaheri, F.M., and Rashidi, A., The Effect of Corona Treatment on Indigo Dyed Cotton Fabric, In "Proceedings of the 3rd International Textile, Clothing & Design Conference,"Dubrovnik, Croatia, pp. 303-306 (2006).
21.
Ghoranneviss, M., Shahidi, S., Moazzenchi, B., Anvari, A., Rashidi, A., and Hosseini, H., Comparison Between Decolorization of Denim Fabrics with Oxygen and Argon Glow Discharge, Surf. Coat. Tech. 201, 4926-4930 (2007).
22.
Kochavi, D. , Videbaek, T., and Cedroni, D., Optimizing Processing Conditions in Enzymatic Stonewashing, Am. Dyest. Rep. 79, 24-28 (1990).
23.
Olson, L., A New Technology for Stoneless Stone-washing Applications, Am. Dyest. Rep. 77, 19-22 (1988).
24.
Tyndall, R.M. , Application of Cellulase Enzymes to Cotton Fabrics and Garments, Textile Chem. Colour. 24, 23-26 (1992).
25.
Lieberman, M.A. , and Lichtenberg, A.J., "Principles of Plasma Discharge and Materials Processing," (2nd Edn.), Wiley, Hoboken, New York, USA (2005).
26.
Jovančić, P., Jocić, D., Radetić , M., Topalović, T., and Petrovic, Z. Lj., The Influence of Surface Modification on Related Functional Properties of Wool and Hemp, Mater. Sci. Forum494, 283-290 (2005).
27.
Puač, N., Petrović , Z. Lj., Živković, S., Giba, Z., Grubišić, D., and Đorđević, A.R., Low Temperature Plasma Treatment of Dry Empress-tree Seeds, In "Plasma Processes and Polymers," Hoboken, John Wiley and Sons, New York, USA (2005).
28.
Yugoslav Standard, JUS F.S2.022, Determination of Bursting Strength of Fabrics (1958).
29.
http://www.resil.com/finishesfaqs.htm.
30.
Thorsen, W. , Modification of the Cuticle and Primary Wall of Cotton by Corona Treatment, Textile Res. J. 44, 422-428 (1974).
31.
Yuen, C.W.M. , and Kan, C.W., Influence of Low-temperature Plasma on the Ink-jet-printed Cotton Fabric, J. Appl. Polym. Sci. 104, 3214-3219 (2007).
32.
Sun, D. , and Stylios, G.K., Fabric Surface Properties Affected by Low Temperature Plasma Treatment, J. Mater. Process. Technol. 173, 172-177 (2006).
33.
Thorsen, W.J. , Improvment of Cotton Spinnability, Strength and Abrasion Resistance by Corona Treatment, Textile Res. J. 41, 455-458 (1971).
34.
Abbott, G.M. , and Robinson, G.A., The Corona Treatment of Cotton, Part II: Yarn and Fabric Properties, Textile Res. J. 47, 199-202 (1977).
