Real-time, non-intrusive and non-destructive process monitoring of micromoulding has been performed using novel ultrasonic sensors integrated onto the barrel and mould insert with an ultrasonic pulse-echo technique. The relative variation of the polymer melt temperature inside the extrusion barrel can be obtained using the ultrasonic velocities of the melt measured at the barrel during extrusion. Melt flow arrival in the mould, and solidification, shrinkage and detachment of the polymer inside the mould cavity are also successfully monitored. The presented ultrasonic sensors and technique enable optimizing the micromoulding process, and improving quality of the moulded parts and process efficiency.
Benzler, T., Piotter, V., Hanemann, T., Mueller, K., Norajitra, P., Ruprecht, R. and Hausselt, J.1999: Innovations in molding technologies for microfabrication . Proceedings of the SPIE3874, 53—60.
2.
Brown, E.C., Collins, T.L.D., Dawson, A.J., Olley, P. and Coates, P.D.1999: Ultrasound: a virtual instrument approach for monitoring of polymer melt variables. Journal of Reinforced Plastics and Composites18, 331—38.
3.
Bryce, D.M.1991: Thermoplastics troubleshooting for injection molders. Society of Plastics Engineers.
4.
Edwards, R. and Thomas, C.2001: On-line measurement of polymer orientation using ultrasonic technology. Polymer Engineering and Science41, 1644—53.
5.
França, D.R., Jen, C.-K., Nguyen, K.T. and Gendron, R.2000: On-line ultrasonic monitoring of polymer extrusion. Polymer Engineering and Science40, 82—94.
6.
Kiehl, C., Chu, L.-L., Letz, K. and Min, K.2001: On-line ultrasonic measurements of methyl methacrylate polymerization for application to reactive extrusion. Polymer Engineering and Science41, 1078—86.
7.
Kobayashi, M. and Jen, C.-K.2004: Piezoelectric thick bismuth titanate/lead zirconate titanate composite film transducers for smart NDE of metals. Smart Materials and Structures13, 951—56.
8.
Piché, L., Massines, F., Hamel, A. and Neron, C.1988: Ultrasonic characterization of polymers under simulated conditions. US Patent 4,754,645.
9.
Piché, L., Hamel, A., Gendron, R., Dumoulin, M. and Tatibouët, J.1995: Ultrasonic characterization of polymer melts under processing conditions. US Patent 5,433,112.
10.
Tatibouet, J. and Piché, L.1991: Ultrasonic investigation of semicrystalline polymers: study of poly(ethylene terephthalate). Polymer32, 3147—53.
11.
Tom, A.M. and Coulter, J.P.2002: Advancements in micro-molding for small-scale product fabrication. Proceedings of the ASME International Mechanical Engineering Congress & Exposition, 1—9.
12.
Waller, D., Iqbal, T. and Safari, A.1989: Poling of lead zirconate titanate ceramics and flexible piezoelectric composites by the corona discharge technique. Journal of the American Ceramic Society72, 322—24.
13.
Weir, C.J.1975: Introduction to injection molding. Society of Plastics Engineers.
14.
Wen, S.-S.L., Jen, C.-K. and Nguyen, K.T.1999: Advances in on-line ultrasonic monitoring of the injection molding process using ultrasonic techniques. International Polymer ProcessingXIV, 175—82.
15.
Whiteside, B.R., Martyn, M.T., Coates, P.D., Allan, P.S., Hornsby, P.R. and Greenway, G.2003: Micromoulding: process characteristics and product properties. Plastics, Rubber andComposites32, 231—39.
16.
Whiteside, B.R., Martyn, M.T., Coates, P.D., Greenway, G., Allan, P. and Hornsby, P.2004: Micromoulding: process measurements, product morphology and properties. Plastics, Rubber andComposites33, 11—17.
17.
Whiteside, B.R., Brown, E.C., Ono, Y., Jen, C.-K. and Coates, P.D.2005: Polymer degradation and filling incompletion monitoring for micromolding using ultrasound. Proceedings of the Society of Plastics Engineers ANTEC, 624—28.
