Simulation and real weather data: A comparison for Cyprus case

Abstract

This paper compares three sets of weather data for Cyprus and investigates the relationship between similarity of weather data and similarity of building heating and cooling loads. A building energy simulation weather file containing a year of hourly values of typical weather data for Larnaca was compared with 10 years of daily mean data (dry bulb temperature, global solar radiation, wind speed and relative humidity) for two other locations (Kyrenia and Nicosia). This was done by reducing the hourly data to daily mean values, generating the cumulative distribution functions of the three data sets and calculating the Finkelstein-Schafer statistics as a measure of similarity. It was found that the data for Larnaca were similar to that for Kyrenia and Nicosia, and most similar to that for Nicosia. The relationship between similarity of weather data, as measured by the Finkelstein-Schafer statistic, and the space heating and cooling loads of a simulated simple building was then investigated for some locations in the Mediterranean region. It was found that there was no apparent relationship between the Finkelstein-Schafer statistics and the total heating and cooling loads, but that there was a clear relationship between the Finkelstein-Schafer statistics and the heating and cooling loads considered separately. It is concluded that:

the Finkelstein-Schafer statistic is a useful measure of similarity when comparing weather data sets;

it is important to consider space heating and cooling loads separately, not just total load;

comparing weather data for Palermo, Cairo and Jerusalem with that for Larnaca, a smaller value of the Finkelstein-Schafer statistic is associated with more similar heating and cooling loads;

the Finkelstein-Schafer statistics are smaller for Kyrenia and Nicosia than for Palermo, Cairo and Jerusalem, so weather data for Larnaca can be considered for use in building energy simulation studies for Kyrenia and Nicosia.

Practical application: There are many simulation weather data files available for different locations that can be used for dynamic thermal simulations of buildings. Yet, it is not practical to generate weather data file for every location. This work suggests that if a building energy simulation weather data set for a location is not available, then similar data for another location can be used, provided that FS statistic is small between the locations. This comparison has been performed for three locations in Cyprus in this work.

Keywords

Weather data sets thermal simulation weather of Cyprus Finkelstein-Schafer statistic

Get full access to this article

View all access options for this article.

References

Finkelstein

Schafer

. Improved goodness-of-fit tests. Biometrika 1971; 58: 641–645.

Rahman

Dewsbury

. Selection of typical weather data (test reference years) for Subang, Malaysia. Build Environ 2007; 42: 3636–3641. http://linkinghub.elsevier.com/retrieve/pii/S0360132306002885 (accessed 3 December 2010).

Lee

Yoo

Levermore

. Generation of typical weather data using the ISO Test Reference Year (TRY) method for major cities of South Korea. Build Environ 2010; 45: 956–963. http://linkinghub.elsevier.com/retrieve/pii/S0360132309002807 (accessed 11 October 2010).

Levermore

Parkinson

. Analyses and algorithms for new Test Reference Years and Design Summer Years for the UK. Build Serv Eng Res Technol 2006; 27: 311–325. http://bse.sagepub.com/cgi/doi/10.1177/0143624406071037 (accessed 17 August 2015).

CIBSE. Weather, solar and illuminance data CIBSE Guide J, London: Chartered Institution of Building Services Engineers, 2002.

Wilcox

Marion

. Users manual for TMY3 data sets. Renewable energy, Golden: National Renewable Energy Laboratory, 2008.

Hitchin

Holmes

Hutt

. The CIBS example weather year. Build Serv Eng Res Technol 1983; 4: 119–124. http://bse.sagepub.com/cgi/doi/10.1177/014362448300400306 (accessed 3 December 2010).

U.S. Department of Energy. Building Technologies Program, Building Energy Software Tools Dictionary, IWEC. http://apps1.eere.energy.gov/buildings/energyplus/weatherdata_sources.cfm (2015, accessed 22 August 2015).

Forejit L, Hensen J, Drakal F, et al. Weather data around the world for design of field hospital HVAC. In: Proceedings of the 17th Int Air-Conditioning and Ventilation Conference, pp. 6–11. Prague: Society of Environmental Engineering.

10.

Crawley

Huang

. Does it matter which weather data you use in energy simulations? Build Simul Energy News 1997; 18: 2–12.

11.

IES Virtual Environment. Apache Weather & Site Editor APlocate User Guide Virtual Environment 5.9. Integrated Environmental Solutions Limited, 2009.

12.

IES Virtual Environment. Integrate Environmental Solutions, Weather Files. http://www.iesve.com/support/weatherfiles (2015, accessed 17 October 2012).

13.

North Cyprus Meteorological Office. Private communication with Meteorological Service of North Cyprus, Nicosia: TRNC Ministry of Public Works, Environment and Culture, 2010. .