Attenuation-Corrected Estimators of Reliability

Attenuation, Deflation, Restriction in Range, and MEC in Correlation

Attenuation in correlation has been discussed for more than a century starting from Pearson (1903) and Spearman (1904). The phenomenon has been studied, specifically, by scholars working on restriction of range (RR; see the literature in Sackett & Yang, 2000; Sackett et al., 2007; Schmidt et al., 2008). RR is phenomenon that when only a portion of the range of values of the variable is actualized in the sample, such as when only the best performing students from the population apply to a very demanding study program causing that the variance in the entrance test is reduced remarkably, this leads to inaccuracy of the estimates used in prediction the performance (see illustrations of different patterns of RR in Sackett & Yang, 2000). Another area where the attenuation of correlation is considered in detail are validity studies and meta-analytic studies (see literature in, e.g., Schmidt & Hunter, 2015; Schmidt et al., 2008). Many options to correct attenuation have been offered, specifically, related to concurrent validity of the scores (see a typology and history in Sackett & Yang, 2000; Sackett et al., 2007; see also Schmidt et al., 2008).

Deflation or inaccuracy in the estimates of correlation has been noticed in several simulations (see, e.g., in Martin, 1973, 1978; Metsämuuronen, 2021a, 2022b; Olson, 1980). Even if there is no traditional manifestation of RR in a test, the product-moment correlation coefficient itself (PMC; Pearson, 1896) is deflated because PMC is very vulnerable to several sources of MEC (see Metsämuuronen, 2021a, 2022b). It is known that PMC cannot reach the ultimate perfect correlation unless the variables have equal number of categories (see algebraic reasons in, e.g., Metsämuuronen, 2017); this is the technical reason for attenuation. This obvious attenuation or deflation is simple to observe if we have two identical continuous variables which are truncated such that one is dichotomized (g) and the other is polytomized (X). The magnitude of the estimates of the correlation between these different manifestations of the same variable by PMC cannot reach the obvious (latent) perfect correlation but, instead, the highest value depends on several factors even without RR. Some of these sources of MEC are well-known such as the number of categories in g and X and the cut-off where the dichotomization and polytomization has been made (see simulations, e.g., in Metsämuuronen, 2020a, 2022b).

Attenuation and deflation in correlation has a strict relevance in measurement modeling settings where the dimensions of items (g) and score (X) differ from each other in an obvious manner. Specifically, Schmidt and Hunter (1999) have pointed out that we should try to embed corrections of attenuation as part of our estimations of measurement error. This is an understandable and relevant point because the obvious attenuation in PMC has a strict and remarkable effect on the estimates of reliability. This is illustrated later by empirical examples. Although the issue has been known for tens of years, and some solutions have been offered for the practical use, the conceptualization of MEC in the measurement models is somewhat undeveloped (see an attempt in Supplement Appendix 1). This article aims to illustrate the effect of attenuation and deflation in the estimators of reliability and to offer some practical solutions for the problem.

Attenuation and Deflation in Reliability

Brown (1910) and Spearman (1910) may be the first scholars to connect attenuation of the estimates of correlation with the estimates of reliability—although in an opposite way to the interest in this article. Originally, the first estimator of reliability, Brown–Spearman parallel reliability coefficient (BS; of the reasoning for the unconventional order of the inventors, see Cho & Chun, 2018), was invented to get a better approximation of correlation in the case of “faulty data” (see also Guttman, 1945). In this article, the viewpoint is flipped: the flaws in correlation coefficient are, factually, the elementary reason for the mechanical underestimation in reliability. Although flipping the viewpoint, we note Brown’s and Spearman’s remarkable role in initiating the discussion of measurement error and reliability as we have today.

Another important scholar in the history pointing to the mechanical error in the estimates of reliability was Louis Guttman whose seminal study of different lower bounds of reliability (Guttman, 1945) is still valid: the true population reliability is always higher than the observed reliability by the coefficient we know today as coefficient alpha (α; chronology, Guttman, 1945; Jackson & Ferguson, 1941; Kuder & Richardson, 1937) or Cronbach’s alpha (Cronbach, 1951). Novick and Lewis (1967) continued Guttman’s work and showed that underestimation is caused by deviation of the (essential) tau-equivalency: if all items have (essentially) identical true value (tau), alpha will not underestimate reliability (see the discussion also in Raykov & Marcoulides, 2017).

Since Guttman (1945) and Novick and Lewis (1967), numerous studies have handled the underestimation in reliability and, specifically, in α. Attenuation in α has been connected to a simplified assumption of the classical test theory including violations in tau–equivalence, unidimensionality, and uncorrelated errors (e.g., Green & Yang, 2009; Trizano-Hermosilla & Alvarado, 2016). Among others, Gadermann et al. (2012), Metsämuuronen (2017, 2020a, 2021a, 2022b), Zumbo et al. (2007) have discussed a different type of reason for the underestimation in reliability: technical underestimation of correlation by PMC discussed above.

Notably, PMC is embedded in most of the widely used estimators of reliability. PMC in the form of item–score correlation ( ρ g X ) is visible in such classic estimators of reliability as BS, Flanagan–Rulon formula (Rulon, 1939), Kuder–Richardson formulas 20 and 21 (KR20, KR21; Kuder & Richardson, 1937), coefficient alpha, lambda family ( λ 1 − λ 6 , Guttman, 1945), and the greatest lower bound of reliability based on Guttman’s λ₄ (GLB; Jackson & Agunwamba, 1977; Woodhouse & Jackson, 1977). Common to these estimators is that the variance of the test score ( σ X 2 ) inherited from the basic definition of reliability ( R E L = σ T 2 / σ X 2 = 1 − σ E 2 / σ X 2 ɛ ) is strictly expressed in the formula, and σ X 2 can be expressed using item variances ( σ g 2 ) and ρ g X : σ X 2 = ( ∑ g = 1 k σ g × ρ g X ) 2 (Lord et al., 1968) where k refers to number of partitions or items in the compilation. Then, coefficient alpha, as an example, can be expressed as

α = k k − 1 ( 1 − ∑ i = 1 k σ g 2 ( ∑ g = 1 k σ g × ρ g X ) 2 )

(1)

(Lord et al., 1968) where PMC is visible.

PMC is embedded in such estimators as Armor’s theta ( ρ T H ; Armor, 1973; see also Kaiser & Caffrey, 1965; Lord, 1958)

ρ T H = k k − 1 ( 1 − 1 ∑ i = 1 k λ i 2 )

(2)

ρ ω = ( ∑ i = 1 k λ i ) 2 ( ∑ i = 1 k λ i ) 2 + ∑ g = 1 k ( 1 − λ i 2 )

(3)

ρ M A X = 1 1 + 1 ∑ i = 1 k ( λ i 2 / ( 1 − λ i 2 ) )

(4)

(e.g., Cheng et al., 2012). Relation of ρ g X and the principal component loadings (in ρ T H ) and factor loadings (in ρ ω and ρ M A X ) is understandable because the loadings are, essentially, correlations between an item and a score variable (e.g., Cramer & Howitt, 2004; Kim & Mueller, 1978; Yang, 2010); λ _i is essentially ρ g X .

Attenuation and Deflation in Reliability in Practical Testing Settings

The consequence of the attenuation in ρ g X is that, using the traditional estimators of reliability, the estimates are always negatively biased. While ρ g X is severely attenuated and deflated, specifically, with items of extreme difficulty levels, we can predict that if the test is very difficult or very easy for the target group, or if the items are incrementally difficult including both easy and difficult items, the estimate of reliability would be attenuated remarkably because of MEC. If we use attenuation-corrected ρ g X or if replacing ρ g X in the estimators of reliability with another coefficient of correlation shown to be less MEC-affected, we get attenuation- or MEC-corrected estimators of reliability with a possibly remarkable reduction of attenuation in reliability. The phenomenon is illustrated here by two empirical examples, and the factual estimators are discussed in section Attenuation and other deflation-corrected estimators of reliability.

The first example comes from Metsämuuronen and Ukkola (2019). They used a very easy sub-test of preconditions in mother language at the beginning of the first year in school as a part of a National level assessment of learning outcomes (n = 7770); 72% of the test takers got the highest possible score in 8-item, 11-point screening test for basic skills of understanding auditive instructions. The magnitude of the estimate by coefficient alpha was α = 0.25 and by maximal reliability ρ M A X = 0.48 . The outcome was checked by a MEC-corrected estimator ( α D ; see later equation (12)) by replacing ρ g X in the formula of alpha by Somers D (Somers, 1962), known to be more resistant to MEC than PMC, especially, with binary items (see Metsämuuronen, 2020a, 2020b, 2021a). The magnitude of the estimate appeared to be α D = 0.86 . Hence, in comparison with α D , the estimate by α was deflated from 0.86 to 0.25, that is, 0.61 units of reliability (or 71%; see this interpretation in Gadermann et al., 2012) and maximal reliability was deflated 0.38 units of reliability (46%). Deflation of a same magnitude was found also in Gadermann et al.’s (2012) dataset where, by using ordinal alpha ( α O R D ) , another kind of MEC-corrected estimator based on polychoric correlation (R _PC ; Pearson, 1900, 1913), the estimate by α was deflated from 0.85 ( α O R D ) to 0.46 ( α ) , that is, 0.39 units of reliability (46%). In both examples the attenuation in α (as well as in ρ M A X ) is remarkable and worth noting.

The obvious reason for the remarkably higher estimate by α D and α O R D than by the traditional α and ρ M A X is that PMC and factor loadings are severely affected by MEC in items with extreme difficulty level while D and R _PC are less affected by MEC in the binary case (see Metsämuuronen, 2021a, 2022b). In the case of Metsämuuronen and Ukkola (2019), the magnitude of estimate would have been even higher if R _PC or Goodman–Kruskal gamma (G; Goodman & Kruskal, 1954) was used instead of D in the formula because the estimates by D are usually more conservative than those by G (see a re-analysis of the dataset in Metsämuuronen, 2022a). Some exceptions of the conservativeness of D are discussed by, for example, Metsämuuronen (2021b), and, in the case of binary items, the difference between the estimates by R _PC and G is nominal (Metsämuuronen, 2021a).

Research Question

Seeking the most accurate estimate of reliability is important for all four main uses of reliability discussed above. Attenuation and deflation in reliability is technical and caused, mainly, by the mechanical error in ρ g X . A relevant question is, how to solve the issue of attenuation in ρ g X and how this could be utilized in estimating reliability.

While there are some MEC-corrected estimators available based on changing the whole estimator of correlation (see Gadermann et al., 2012; Metsämuuronen, 2020b, 2021a, 2021b, 2022a; Zumbo et al., 2007; some are discussed below), this article studies the option of a relevant attenuation correction for ρ g X as a solution. A simple correction of attenuation for ρ g X is proposed first after which a family of attenuation-corrected estimators of reliability is proposed and numerical examples are given of their behavior in three forms of datasets: (1) a dataset of extreme difficulty level, (2) a dataset of incremental difficulty level, and (3) a larger simulation based on a dataset of 1440 real-world tests. The conceptual discussion related to the attenuation-corrected estimators of reliability is incorporated in Supplement Appendix 1 (see also Metsämuuronen, 2022a, 2022b).

Selected MEC-Corrected Estimators of Reliability as Benchmarks

Metsämuuronen (2021a, 2022a, 2022b), specifically, discuss using the formula (1) as a basis of estimating MEC-corrected alpha where the error-causing ρ g X is replaced by a totally different estimator that would be less affected by MEC. Some options of this kind of coefficients have been suggested in earlier works: R _PC (see Gadermann et al., 2012; Metsämuuronen, 2022a; Zumbo et al., 2007), G and dimension-corrected G (G₂; Metsämuuronen, 2021a, 2022a) as well as D and dimension-corrected D (D₂; Metsämuuronen, 2020b, 2021a, 2022a; Metsämuuronen & Ukkola, 2019). Of these, in simulations, R _PC , G, and G₂ appear to be MEC-free in many conditions of MEC affecting obviously in PMC (Metsämuuronen, 2021a, 2022b). Several other coefficients may be found potential as substitutes for ρ g X (see some options in Metsämuuronen, 2020a, 2022b, Moses, 2017).

Let us denote a general weight factor between an item g _i and the latent variable θ by w _i . If we apply the estimator based on alpha (equation (1)), select the raw score (X) as the manifestation of θ, and vary w _i , a theoretical form of MCERs based on the formula of alpha is ρ α _ w i X = α w i X = k k − 1 ( 1 − ∑ i = 1 k σ i 2 ( ∑ i = 1 k σ i × w i X ) 2 ) . Selecting w i X = ρ g X leads us to the traditional alpha while some MCERs based on different estimators of correlation can be based on R _PC , G, G₂, D, and D₂

ρ α _ R P C i X = α R P C i X = k k − 1 ( 1 − ∑ i = 1 k σ i 2 ( ∑ i = 1 k σ i × R P C i X ) 2 )

(5)

ρ α _ G i X = α G i X = k k − 1 ( 1 − ∑ i = 1 k σ i 2 ( ∑ i = 1 k σ i × G i X ) 2 )

(6)

ρ α _ G 2 i X = α G 2 i X = k k − 1 ( 1 − ∑ i = 1 k σ i 2 ( ∑ i = 1 k σ i × G 2 i X ) 2 )

(7)

ρ α _ D i X = α D i X = k k − 1 ( 1 − ∑ i = 1 k σ i 2 ( ∑ i = 1 k σ i × D ( g | X ) i X ) 2 )

(8)

ρ α _ D 2 i X = α D 2 i X = k k − 1 ( 1 − ∑ i = 1 k σ i 2 ( ∑ i = 1 k σ i × D 2 i X ) 2 )

(9)

Attenuation-Corrected Correlation as a Substitute of ρ g X in the Estimators of Reliability

Specific types of DCERs are obtained if, in the estimators, PMC is replaced by an attenuation-corrected PMC. Attenuation in correlation have been studied since the dawn of estimators as discussed above. The well-known corrections based on works of Pearson (1903 with notes by Aitken, 1934 and Lawley, 1943) and Thorndike (1949) are based on correcting attenuation when restriction occurs in one variable, that is, in the score variable. This kind of attenuation correction is used, specifically, when selecting personnel or students based either directly or indirectly (that is, as a part of some other criteria) on their performance in a test. The idea is to enhance the concurrent validity of the test score of this restricted sample by altering it either by knowing or modeling the behavior of unrestricted population variance (see the mechanics in, e.g., Sackett & Yang, 2000; Schmidt et al., 2008). These approaches to attenuation correction do not seem usable in item analysis settings. Hence, another logic is proposed as an option for measurement modeling settings.

To propose another type of attenuation correction, we recall that the correlation between an item and a score given the dataset cannot exceed the limit specified by the observed responses in the item and the score. Namely, given the score and the observed response pattern in the item, the score variance ( σ X 2 ) and item variance ( σ g 2 ) are fixed. Recalling the basic formula of PMC ( ρ g X = σ g X / σ g σ X ) , the only element affecting the magnitude of correlation is the item–score covariance ( σ g X ) . The maximum value of σ g X is obtained when g and X are in the same order. Then, a simple attenuation correction related to ρ g X ( ρ A C , R _AC ) is to proportion the observed correlation ( ρ g X _ O b s ) with the maximal possible correlation ( ρ g X _ M a x ) given the observed score and item

ρ A C = R A C = ρ g X _ O b s ρ g X _ M a x

(10)

R _AC proposed here is not restricted to measurement modeling settings; g and X refer to general variables with a narrower and wider scale, respectively. Calculation of R _AC is illustrated later with numerical examples.

Attenuation-Corrected Estimators of Reliability

If we apply the estimators (1), (2), (3), and (4), and we use R _AC as the manifestation of the linking element w _i , but we do not fix the manifestation of θ, we get (a theoretical) attenuation-corrected alpha.

ρ α _ w i θ = ρ α _ R A C i θ = α R A C = k k − 1 ( 1 − ∑ i = 1 k σ i 2 ( ∑ i = 1 k σ i × R A C i θ ) 2 )

(11)

attenuation-corrected theta

ρ T H _ w i θ = ρ T H _ R A C i θ = k k − 1 ( 1 − 1 ∑ i = 1 k R A C i θ 2 )

(12)

attenuation-corrected omega

ρ ω _ w i θ = ρ ω _ R A C i θ = ( ∑ i = 1 k R A C i θ ) 2 ( ∑ i = 1 k R A C i θ ) 2 + ∑ i = 1 k ( 1 − R A C i θ 2 )

(13)

and attenuation-corrected ρ M A X

ρ M A X _ w i θ = ρ M A X _ R A C i θ = 1 1 + 1 ∑ i = 1 k ( R A C i θ 2 / ( 1 − R A C i θ 2 ) )

(14)

Using the estimators (2), (3), and (4) outside of their original context is, obviously, debatable; here a stand is taken that they could be used as stand-alone estimators even without their original contexts related to principal component- and factor analysis. Alternatively, the estimators (12), (13), and (14) may be taken as outputs of renewed procedures in the factor- and principal component analysis where λ _i is an attenuation-corrected loading. In all cases, the magnitude of the attenuation-corrected correlation is higher than the observed loading and, consequently, the attenuation-corrected reliability is expected to be higher than the reliability obtained by using traditional estimator.

If we apply equation (10) to estimators (11) to (14), we get ACERs based on R _AC . In the extreme cases where all items can discriminate the test takers in a deterministic manner, that is, in the case of R _ACi = R _ACj = 1, the ACERs based on the forms of theta (equation (12)) and omega (equation (13)) would lead to perfect reliability irrespective of item variances: ρ T H _ R A C X = k k − 1 ( 1 − 1 k ) ≡ 1 and ρ ω _ R A C X = ( k ) 2 ( k ) 2 + 0 ≡ 1 . In the case, estimator (11) reaches the value α R A C = 1 only when all item variances are equal. Then, α ^ R A C = k k − 1 ( 1 − k σ 2 ( k σ ) 2 ) = k k − 1 ( 1 − 1 k ) ≡ 1 . Otherwise, the maximum value is α R A C M A X = k k − 1 ( 1 − ∑ i = 1 k σ i 2 / ( ∑ i = 1 k σ i ) 2 ) . Notably, in the case of deterministic discrimination (in any of the items), a coefficient based on ρ M A X (equation (14)) could not be used due to mathematical reasons (it requires division by zero which is not defined).

Case 1: A Test of Extreme Difficulty Level

Assume a hypothetical dataset of five items with 0–2 points (Tables A1a–A1c in Supplement Appendix 2). This could be a screening test of understanding instructions where all native speakers are expected to get full marks while second language speakers or those with some learning difficulty may make some mistakes in the test items.

Four points highlighted from Case 1 are relevant also later in Case 2. First, using equation (1), the traditional coefficient alpha underestimates the reliability in an obvious manner: α ^ = 0.352 . The low value is caused by reduction in item variances leading to MEC in observed ρ i X ; even at the highest, given the dataset, ρ g X can reach values ρ i X _ M a x = 0.616 – 0.894 . Equation (11) gives an attenuation-corrected estimate α ^ R A C = 0.774 . Although the correction of attenuation or deflation in reliability based on the alpha formula is remarkable (0.42 units of reliability), it seems conservative in comparison with the more advanced ACERs: equation (12) gives an estimate ρ ^ T H _ R A C X = 0.834 and equation (13) ρ ^ ω _ R A C X = 0.873 ; all are notably higher than the traditional alpha and theta ( ρ ^ T H θ = 0.631 ) . In comparison with the different ACERs, the original alpha seems deflated by 0.48–0.52 units of reliability. Notably, estimates by omega and maximal reliability cannot be calculated because the correlation matrix is not positive definite.

Second, because some of the MCERs based on changing the entire coefficient have concrete interpretations, their estimates may be valuable benchmarks to the deflation in the traditional alpha. The estimator based on R _PC (equation (5)) gives the estimate α ^ R P C = 0.863 , the estimator based on G (equation (6)) α ^ G = 0.902 , and the estimator based on D (equation (8)) gives the value α ^ D = 0.886 . The estimates by G and D strictly indicates the proportion of logically ordered test takers in the item after they are ordered by the score; this proportion can be calculated by p = 0.5 × G + 0.5 and p = 0.5 × D ( g | X ) + 0.5 derived from Metsämuuronen (2021b). For example, by using D, in item g₁ this proportion is p = 0.5 × 0.842 + 0.5 = 0.921 , that is, 92.1% of all observations in item g₁ are in a logical order after ordered by the score. In all items together, the average proportion is 92.9%. Hence, the set of items can discriminate very effectively those who got full marks from other test takers. Thus, it seems that attenuation-corrected values reflect more accurately the MEC-free reliability than the original estimate by alpha.

Third, that the magnitude of the estimates by α R A C is lower than the one by α R P C is not a general characteristic. In Case 2, it is to be seen that α ^ R A C > α ^ R P C . That the estimate based on G is higher than the one by R _PC is not a general characteristic either; it is also a coincidence in the dataset. In real-life settings with two or three categories in the item, G and R _PC seem to give estimates that are quite close to each other (see simulations in Metsämuuronen, 2021a, 2022b). However, that the magnitude of the estimates by D are lower than those by G is expected because, with the same pairs of variables, D tends to give more conservative estimates of association than G (see Metsämuuronen, 2021b). Also, that the magnitude of the estimates is higher when using G₂ and D₂ in comparison with G and D is expected because G₂ and D₂ are developed to correct the obvious underestimation obtained by G and D when the number of categories exceeded three (D) or four (G). Using equation (7) based on G₂, we get an estimate α ^ G 2 = 0.910 and by equation (9) based on D₂, we get α ^ D 2 = 0.894 .

Fourth, to outline, because ρ g X is severely attenuated with items of extreme difficulty level, the estimate of reliability by coefficient alpha of a test with extreme difficulty level is severely attenuated; the traditional alpha may underestimate reliability around 0.42–0.52 units of reliability in comparison with attenuation-corrected coefficients. The simple correction for attenuation (equation (10)) in each item and the related ACERs have a remarkable improvement over the traditional estimator. By comparing these estimates with the other type of MEC-corrected estimates of reliability based on coefficient alpha, we note that the estimate by α R A C seems conservative when the test has an extreme difficulty level. This characteristic is not a general one as is to be seen in Case 2. A simulation regarding the limits and characteristics of ACERs are discussed with Case 3.

Case 2: Incrementally Structured Dataset

Assume a hypothetical dataset as in Tables A2a–A2c (Supplement Appendix 2) of five items with 0 –2 points with incremental difficulty level of items. This could be a short-ish sub-test of “Algebra” as a part of a longer achievement test of mathematics.

Basically, the main result is the same as in Case 1: reliability estimated by the traditional coefficient alpha ( ( α ^ = 0.411 ) ), theta ( ρ ^ T H = 0.531 ) , and omega ρ ^ ω = 0.563 are deflated because the test comprises both very easy and difficult items; even at the highest in the given dataset, PMC in the extreme items could not exceed values ρ i X _ M a x = 0.451 − 0.482 . The estimates of the ACERs by equations (10)–(12) are α ^ R A C = 0.790 ρ ^ T H _ R A C = 0.838 , ρ ^ ω _ R A C = 0.881 , respectively. The estimate by the ACER based on the alpha formula comes quite close to the ones by other types of MEC-corrected estimates by equations (5)–(7) ( α ^ R P C = 0.787 , α ^ G = 0.785 , and α ^ G 2 = 0.806 , respectively). In the case, the differences between α R A C and other deflation-corrected estimates based on alpha are subtle but the difference between these and the traditional α is notable; the traditional alpha seems to underestimate reliability around 0.38–0.47 units of reliability, traditional theta seems to underestimate reliability around 0.25 units, and traditional omega around 0.24 units of correlation.

Case 3. Larger Simulation of the Behavior of R_AC and Attenuation-Corrected Estimator of Reliability

A real-life dataset of 4022 nationally representative test-takers of a mathematics test with 30 binary items (FINEEC, 2018) is used as the “population” in simulation of the behavior of R _AC and ACERs in the real-life testing settings. The characteristic of the dataset is discussed in Supplement Appendix 2. The dataset of individual items including several indicators of item–score association is available at https://dx-doi-org.web.bisu.edu.cn/10.13140/RG.2.2.17594.72641. The dataset of reliabilities is available at https://dx-doi-org.web.bisu.edu.cn/10.13140/RG.2.2.27971.94241. The main results of the simulation are collected in what follows.

First note to make is that, with very small sample size (n = 25), both Rit and R _AC seem to tend to underestimate the population correlation in an obvious manner although R _AC less than Rit (Figure A1 in Supplement Appendix 2). Second, except the smallest sample size in the simulation, the R _AC in the samples tends to be overestimate the R _AC in population mildly with small sample sizes and when the scale in the item is wide. This is understood by the fact that, with small sample sizes, the probability to obtain near-deterministic patterns leading to high magnitudes of R _AC is higher than in the (larger) population. With items with a narrow scale (df(g) < 4) and with sample sizes around n = 100 or higher, the possible overestimation is nominal (see Table A3 in Supplement Appendix 2).

Third, in the simulation dataset, the average estimates of reliability by DCERs are 0.04–0.07 units of reliability higher than those by the traditional estimators using their traditional linking factor and score variable (Table A4 in Supplement Appendix 2). This follows strictly from the fact that magnitude of the estimates by R _AC and R _PC tend to be higher than of those by Rit. That the difference in the magnitude of the estimates in the simulation by the traditional estimators and DCERs is not as dramatic as in Cases 1 and 2 is caused by the fact that the tests in simulation do not allow to prepare tests of extreme difficulty. In the simulation, obtaining tests with extreme difficulty level would have required very short tests using only items with extreme difficulty levels.

Fourth, the estimates using R _AC and R _PC tend to give estimates with largely the same magnitude (see Figure 1; Figure A2 in Supplement Appendix 2) and systematically higher than those by the traditional estimators. This seems to refer to the phenomenon that both DCERs refer to the same latent reliability which is underestimated around 5–8 % by the traditional estimators regardless of the difficulty level of the test items. It seems that, with extreme datasets, the magnitude of the estimates by R _AC are mildly higher than those by R _PC . This difference is nominal though. Simulation of more extreme datasets would shed more light in this matter.OPEN IN VIEWER

Fifth, when it comes to the difference between the sample and population estimates, except the smallest sample size, the ACERs give stable estimates; the differences between the sample and population estimates are subtle. As an example, when using alpha as the base and R _AC as the linking factor, the deviance between the sample and population estimates is, on average, 0.001–0.003 units of reliability depending on sample size (Table A5 in Supplement Appendix 2). If the sample size is n = 200 (or higher), difference is less than 0.001 units of reliability.

Sixth, because of mild overestimation of population R _AC , the ACERs seem to give mild overestimation of the population reliability, specifically, with small sample sizes, polytomous items, and if using rho as the base (Figure A3 in Supplement Appendix 2). The last is expected because rho alone is known to give overestimations with finite sample sizes (Aquirre-Urreta et al., 2019; see also Supplement Figure 3); R _AC and rho combined seems to lead to greater overestimation than the other combinations. From this viewpoint, the MCERs based on alpha, theta or omega and using R _PC as the linking factor tend to lead to more conservative estimates. However, from the factual estimate viewpoint, R _AC and R _PC seem to lead largely to estimates of same magnitude (see Figure 1 above).

Seventh, regardless of the width of the scale in the items, the estimates by ACERs seem to bring us nearer the population value than the other estimators except if rho would be selected as the base (Figure A4 in Supplement Appendix 2). When the scale is very wide (more than seven categories), ACERs tend to overestimate reliability mildly, but the values are still nearer the population value in comparison with traditional estimators and MCERs in comparison. Using rho as the base for ACER is not recommendable because of tendency to produce overestimates with finite samples.

Conclusion of Numerical Examples

As a conclusion from Cases 1, 2, and 3, it is known that, first, the proposed R _AC and ACERs using R _AC as the linking factor may be advantageous in reflecting the true reliability, specifically, when the test includes item with extreme difficulty levels. These types of tests are common in educational settings where the tests are often constructed so that both very easy and very demanding items are included in a test. In these cases, the traditional item–score correlation may be radically attenuated and deflated while R _AC gives a plausible alternative to quantify the true association between the item and score variable. Second, a larger simulation based on a real-world dataset suggests that R _AC gives estimates that are nearer the population value than PMC with small sample sizes although it seems to overestimate mildly the population R _AC when the number of categories in the item exceeds 5. Simulations in this regard would be beneficial. All in all, the larger simulation (Case 3) did not include very extreme datasets. Simulation with datasets of extreme difficulty levels would be beneficial.

Notably, the advance of ACERs in estimating the standard error of the measurement (S.E.m) may be notable in the datasets where the item difficulties are extreme leading to an ultimately non-normal score (see Case 1 above). Supplement Appendix 3 shows an example of a comparison of estimates of S.E.m by using traditional estimators and ACERs. It is seen that, because of technical reasons, a magnitude of a rough general estimate of the measurement error may decrease by 36% or more if we use a deflation-corrected alpha instead of the traditional alpha. It seems that, in comparison with other types of DCERs, ACERs combined with R _AC give conservative estimate in the case of tests with extreme item difficulty (see Metsämuuronen, 2022a). In any case, selecting wisely estimators of reliability that produce estimates being nearer the true reliability value may give us a notable advance in assessing the accuracy of the test scores.

All in all, ACERs discussed in this article are part of a larger family of deflation-corrected estimators of reliability. Comparing different weight factors used in these estimators as well as comparing ACERs with other DCERs (see Metsämuuronen, 2022a), would be beneficial in finding the best combinations of the base and the weight factor. For instance, some estimators may be more usable or recommendable with binary items and some with polytomous items. Systematic comparisons of different estimators and weight factors in different conditions such as varying the test length, test difficulty, sample sizes, item types, and distributions of the latent variables would be beneficial.

Main Results in a Nutshell

The intention in the article was to illustrate the phenomenon of attenuation and deflation in the estimates of reliability and to offer some practical solutions for the problem. The root reason for the attenuation in reliability is the item–score correlation embedded in most of the traditional and widely used estimators of reliability. Because the estimates of correlation by PMC between items and the test score are always attenuated and deflated, this causes attenuation in the estimates of reliability when using the traditional estimators such as coefficient alpha, theta, omega, and maximal reliability. Examples show that, in the extreme cases, the estimates by alpha may be radically deflated to the extent of 0.40–0.50 units of reliability and, in real life-settings, even more than 0.60 units of reliability (see Gadermann et al., 2012; Metsämuuronen & Ukkola, 2019). As a specific solution for the attenuation in the reliability, a new kind of attenuation correction is proposed to replace PMC in the formulas: the attenuation-corrected PMC (R _AC ) as the proportion of observed correlation of the maximal possible correlation with the given variables. Although the numerical examples in the article were given in the context of measurement modeling, R _AC is not restricted to settings related to items and score variable.

Simulations suggest that R _AC could be a useful coefficient to describe the association between two variables with scales with a notable difference in width: RAC strictly refers to the proportion we obtain of the maximal possible correlation with the given dataset. However, if the sample size is small (n < 200), the proportion may be mildly smaller in the population. This is caused by the fact that the probability to obtain deterministic or near-deterministic patterns in a small sample is much higher than in a large population. Deterministic and near-deterministic patterns lead to values R _AC ≈1 which are rarely obtained with large sample sizes and wider populations.

The characteristics of the R _AC were not studied in the article in-depth; some limits are discussed here. R _AC reaches the value 1 when the maximum possible value of PMC is achieved, that is, when the item and the score are in the same order. Value 0 is obtained when the observed correlation is 0. R _AC can also reach negative values; because the maximum possible value is always positive the value of R _AC is negative when the observed PMC is negative. Hence, R _AC reaches the limits of correlation ( − 1 ≤ R A C ≤ + 1 ) If, in the further simulations, R _AC is found to be an asset in evaluating attenuation in correlations, it may be worth considering reporting routinely as a related statistic to the observed correlation. Specifically, in case the scales differ from each other in an obvious manner as is usual in the measurement modeling settings between item and the score variable, reporting either R _AC or the maximal possible correlation given the dataset may help assess the magnitude of possible attenuation or deflation in the observed estimates. Algorithms for estimating the highest possible correlation given the item-and score variance are easy to develop. Maybe, R _AC could be considered also when choosing the best correction formula for the r² effect sizes (see, e.g., Skidmore & Thompson, 2011; Vacha-Haase & Thompson, 2004).

After the R _AC s are calculated, when applied to different base-forms of reliability, attenuation-corrected alpha ( ρ α _ R A C θ or α R A C ), theta ( ρ T H _ R A C θ ), omega ( ρ ω _ R A C θ ), and maximal reliability ( ρ M A X _ R A C θ ) are easy to calculate. These ACERs may remarkably reduce the attenuation in the estimate or reliability—in the numerical examples, deflation in the estimates by coefficient alpha was found to be as high as 0.38–0.52 units of reliability depending on the data structure and the estimator used. In the real-life settings the deflation may be less remarkable; in a larger simulation the deflation was around 0.04–0.07 units of reliability. It can be predicted that when the test includes items with extreme difficulty levels (easy or difficult), ACERs would remarkably correct the attenuation in the estimates of reliability.

Of the initiated ACERs, attenuation-corrected alpha seems to give conservative estimates of the reliability in the case of tests with extreme difficulty level. However, with the tests of incrementally structured difficulty level, the magnitude seems to be at the same level of magnitude as with MEC-corrected estimates of reliability based on R _PC , G and G₂. Because ρ g X never reaches the limits of correlation when the scales of the variables are not identical, it is obvious that, in all practical conditions faced in measurement modeling settings, α R A C > α , ρ T H _ R A C > ρ T H , ρ ω _ R A C > ρ ω , and ρ M A X _ R A C > ρ M A X . Simulations would be beneficial in exploring the behavior of both R _AC and different ACERs in different controlled situations. Specifically, simulations with short tests, test with extreme difficulty levels, and studies related to different types of score variables would be beneficial. Obviously, comparisons of different types of DCERs in different conditions would be beneficial. The latter incudes also comparison of Zumbo et al.’s (2007) ordinal alpha and ordinal theta with the DCERs discussed in this article.

Known Limitations of the Study

The study did not discuss varying interpretations and limitations of different coefficients. However, it is known that the estimators based on G and D have concrete interpretations in reflecting the proportion of logically ordered test takers in the dataset (see Metsämuuronen, 2021b). It is also known that estimators based on R _PC do not refer to the observed score but something unreachable and theoretical (see the discussion in Chalmers, 2017). However, as an indicator of theoretical maximum correlation, R _PC could be used as a benchmark to R _AC . From this viewpoint, the ACERs (11), (12), (13), and (14) seem to lead us to more practical interpretations of the observed score than those using R _PC . Using the latter estimators outside of their original context of principal component- and factor analysis may be debatable though; here, it was assumed that the formulas of theta, omega, and rho could be used also as stand-alone estimators without their original contexts.

The study did not tackle the question of possible overestimation of reliability if using attenuation- and MEC-corrected estimators of reliability. However, as a benchmark, if we think that R _PC do not overestimate the true correlation, it may be relevant to conclude that a MEC-corrected estimator based on R _PC such as equation (5) would not overestimate reliability. A relevant question is, what would be the mechanism for overestimation in attenuation-corrected estimator? From this viewpoint, we recall the results by Aquirre-Urreta et al. (2019) that maximal reliability may overestimate the true reliability with finite samples familiar in real-world testing settings. Hence, DCERs based on rho, in general, may tend to overestimate the population reliability with small and smallish sample sizes. Theoretical and empirical studies in the area would be beneficial.

All in all, this article intended to promote discussion of attenuation in reliability and to offer possible practical solutions in the spirit of Schmidt and Hunter (1999) who suggested incorporating the knowledge from attenuation studies to the estimation of measurement error. The closer we can reach the deflation-free estimates of reliability the more accurately we can evaluate the overall quality of the measurement, describe the error in the test scores, correct the estimates in regression and path modeling as well as correct the attenuation in the validity studies and meta-analysis. Hopefully, the attenuation correction in correlation and ACERs proposed in this article are found useful in this endeavor.