Singularity Analysis of a Three-Leg Six-Degree-of-Freedom Parallel Platform Mechanism Based on Grassmann Line Geometry

Abstract

This paper addresses the determination of the singularity loci of a six-degree-of-freedom spatial parallel platform mechanism of a new type that can be statically balanced. The mechanism consists of a base and a mobile platform that are connected by three legs using five-bar linkages. A general formulation of the Jacobian matrix is first derived that allows one to determine the Plücker vectors associated with the six input angles of the architecture. The linear dependencies between the corresponding lines are studied using Grassmann line geometry, and the singular configurations are presented using simple geometric rules. It is shown that most of the singular configurations of the three-leg six-degree-of-freedom parallel manipulator can be reduced to the generation of a general linear complex. Expressions describing all the corresponding singularities are then obtained in closed form. Thus, it is shown that for a given orientation of the mobile platform, the singularity locus corresponding to the general complex is a quadratic surface (i.e., either a hyperbolic, a parabolic, or an elliptic cylinder) oriented along the z-axis. Finally, three-dimensional representations that show the intersection between the singularity loci and the constant-orientation workspace of the mechanism are given.

Get full access to this article

View all access options for this article.

References

Bonev, I.A., and Gosselin, C.M. 2001. Singularity loci of planar parallel manipulators with revolute joints . 2nd Workshop on Computational Kinematics, Seoul, South Korea, May 20-22.

Collins, C. L., and McCarthy, J. M. 1998. The quartic singularity surfaces of planar platforms in the Clifford algebra of the projective plane . Mechanism and Machine Theory 33: 931–944 .

Conti, J. P., Clinton, C. M., Zhang, G., and Wavering, A. J. 1996. Workspace variation of a hexapod machine tool. Technical report, Department of Mechanical Engineering, University of Maryland .

Dandurand, A. 1984. The rigidity of compound spatial grid . Structural Topology 10: 41–55 .

Ebert-Uphoff, I., and Gosselin, C. M. 1998. Kinematic study of a new type of spatial parallel platform mechanism . Proceedings of the ASME Design Engineering Technical Conferences, Atlanta, GA, DETC98/MECH–5962.

Ebert-Uphoff, I., Gosselin, C. M., and Laliberté, T. 2000. Static balancing of spatial parallel platform mechanisms– revisited . ASME Journal of Mechanical Design 122(1): 43–51 .

Gosselin, C. M. 1990. Determination of the workspace of 6-DOF parallel manipulators . Transactions of the ASME Journal of Mechanical Design 112: 331–336 .

Gosselin, C. M., and Angeles, J. 1990. Singularity analysis of closed-loop kinematic chains . IEEE Transactions on Robotics and Automation 6: 281–290 .

Gosselin, C. M., and Sefrioui, J. 1992. Determination of the singularity loci of spherical three-degree-of-freedom parallel manipulators . ASME Robotics, Spatial Mechanisms, and Mechanical Systems 45: 329–336 .

10.

Gosselin, C. M., and Wang, J. 1997. Singularity loci of planar parallel manipulators with revolute actuators . Journal of Robotics and Autonomous Systems 21: 377–398 .

11.

Gosselin, C.M., and Wang, J. 2000. Static balancing of spatial six-degree-of-freedom parallel mechanisms with revolute actuators . Journal of Robotic Systems 17: 159–170 .

12.

Gosselin, C. M., Wang, J., Laliberté, T., and Ebert-Uphoff, I. 1999. On the design of a statically balanced 6-DOF parallel manipulator . Proceedings of the IFToMM Tenth World Congress on the Theory of Machines and Mechanisms, Oulu, Finland, pp. 1045–1050 .

13.

Hao, F., and McCarthy, J. M. 1998. Conditions for line based singularities in spatial platform manipulators . Journal of Robotic Systems 15(1): 43–55 .

14.

Herder, J. L., and Tuijthof, G.J.M. 2000. Two spatial gravity equilibrators . Proceedings of the ASME 26th Biennial Mechanisms and Robotics Conference, Baltimore, MD, DETC2000/MECH-14120.

15.

Hilbert, D., and Cohn-Vossen, S. 1952. Geometry and the Imagination. New York: Chelsea .

16.

Leblond, M., and Gosselin, C. M. 1998. Static balancing of spatial and planar parallel manipulators with prismatic actuators . Proceedings of the ASME Design Engineering Technical Conferences, Atlanta, GA, DETC98/MECH-5963.

17.

Mayer St-Onge, B., and Gosselin, C. M. 2000. Singularity analysis and representation of the general Gough-Stewart platform . International Journal of Robotics Research 19: 271–288 .

18.

Merlet, J.-P. 1988. Parallel manipulator, part 2: Singular configurations and Grassmann geometry. INRIA Research Report No. 791, Sophia-Antipolis, France .

19.

Merlet, J.-P. 1989. Singular configurations of parallel manipulators and Grassmann geometry . International Journal of Robotics Research 8(5): 45–56 .

20.

Mouly, N., and Merlet, J.-P. 1992. Singular configurations and direct kinematics of a new parallel manipulator . Proceedings of the IEEE International Conference on Robotics and Automation, Nice, France.

21.

Sefrioui, J., and Gosselin, C. M. 1995. On the quadratic nature of the singularity curves of planar three-degree-of-freedom parallel manipulators . Mechanism and Machine Theory 30: 533–551 .

22.

Streit, D. 1991. Spatial manipulator and six degree of freedom platform spring equilibrator theory . Proceedings of the Second National Conference on Applied Mechanisms and Robotics 8B: 1-1–1-6 .

23.

Streit, D. A., and Gilmore, B. J. 1989. Perfect spring equilibrators for rotatable bodies . ASME Journal of Mechanisms, Transmissions, and Automation in Design 111: 451–458 .

24.

Wang, G. 1998. Singularity analysis of a class of the 6-6 Stewart platforms . Proceedings of the ASME Design Engineering Technical Conferences, Atlanta, GA, DETC98/MECH-5954.

25.

Wang, J. 1998. Kinematic analysis, dynamic analysis and static balancing of planar and spatial parallel mechanisms or manipulators with revolute actuators. Ph.D. thesis, Laval University.

26.

Zlatanov, D., Fenton, R. G., and Benhabib, B. 1995. A unifying framework for classification and interpretation of mechanism singularities . Transactions of the ASME Journal of Mechanical Design 117: 566–572 .

27.

Zlatanov, D., Fenton, R. G., and Benhabib, B. 1998. Identification and classification of the singular configurations of mechanisms . Mechanism and Machine Theory 33: 743–760 .