A Sensor-Based Robot Transition Control Strategy

Abstract

This article presents a real-time sensor-based control approach to the manipulation of the transition of a robot from free space motion to contact with an environment. Use is made of exter nal sensors, including proximity sensors and a force sensor at the end effector of the robot, to control the interaction between the robot and its environment. To achieve direct robot end-effector position control, a short-range fiber optic proximity sensor is used. A multi-phase cantrol strategy is proposed that includes an approach phase, where a force con trol scheme is used prior to contact, as well as a proximity phase where the proximity sensor-based control is employed. Implementation results carried out on an industrial robot are reported.

Get full access to this article

View all access options for this article.

References

Allotta, B. , and Buttazzo, G. 1992. Impact handling by proximity and force sensing. Proc. IEEE Int. Conf. on Robotics and Automation, Nice , France, pp. 1245-1250.

An, C.H. , and Hollerbach, J.M. 1987. Dynamic stability issues in force control of manipulators. Proc. IEEE Int. Conf. on Robotics and Automation, Raleigh, NC, pp. 890-896.

Bar-Shalom, Y. , and Fortman, T. 1988. Tracking Data Association. Boston: Academic Press.

De Schutter, J. 1986. Compliant Robot Motion: Task Formulation and Control. Ph.D thesis. Department of Mechanical Engineering, Katholieke University Leuven.

De Schutter, J. 1987. A study of active compliant motion control methods for rigid manipulators based on a generic scheme. Proc. IEEE Int. Conf. on Robotics and Automation, Raleigh, NC, pp. 1060-1065.

Drake, S.H. 1977. Using compliance in lieu of sensory feedback for automatic assembly. IFAC Symposium of Information and Control Problems in Manufacturing Technology, Tokyo, Japan.

Hyde, J.M. , and Cutkosky, M.R. 1993, Contact transition control: An experimental study. Proc. IEEE Int. Conf. on Robotics and Automation, Atlanta , pp. 363-368.

Li, Y.F. , and Daniel, R.W. 1992. Robot tip velocity measurement for direct end effector position control. Proc. IEEE Int. Conf. on Intelligent Robots and Systems, Raleigh, NC, pp. 998-1103.

Li, Y.F. 1993. Robot Proximity Sensing and a Strategy for Transition Control. Ph.D thesis. Department of Engineering Science, Oxford University.

10.

Khatib, O. , and Burdick, J. 1986. Motion and force control of robot manipulators. Proc. IEEE Int. Conf. on Robotics and Automation, San Francisco, pp. 1381-1386.

11.

Marth, G.T. , Tarn, T.J. , and Bejczy, A.K. 1993. Stable phase transition control for robot arm motion. Proc. IEEE Int. Conf. on Robotics and Automation, Atlanta , pp. 355-361.

12.

Mills, J.K. 1990. Manipulator transition to and from contact tasks: A discontinuous control approach. Proc. IEEE Int. Conf. on Robotics and Automation , Cincinnati, Ohio, pp. 440-446.

13.

Novak, J.L. , Feddema, J.T. 1992. A capacitance-based proximity sensor for whole arm obstacle avoidance. Proc. IEEE Int. Conf. on Robotics and Automation, Nice, France, pp. 1370-1314.

14.

Paul, R.P. 1987. Problems and research issues associated with the hybrid control of force and displacement. Proc. IEEE Int. Conf. on Robotics and Automation, Raleigh, NC, pp. 1966-1971.

15.

Sharkey, P.M. , Daniel, R.W. , and Elosegui, P. 1990. Transputer based real time robot control. Proc. IEEE Int. Conf. on Decision and Control, Honolulu, Hawaii, pp. 1161-1162.

16.

Volpe, R. , and Khosla, P. 1991. Experimental verification of a strategy for impact control . Proc. IEEE Int. Conf. on Robotics and Automation, Sacramento, CA, pp. 1854-1860.

17.

Whitney, D.E. 1987. Historic perspective and state of the art in robot force control. Int. J. Robot. Res. 6(1):3-14.

18.

Whitney, D.E. 1989. A survey of manipulation and assembly: Development of the field and open research issues. In Brady, J. M. (ed.): Robotics Science. Cambridge, MA: MIT Press, pp. 291-348.

19.

Youcef-Toumi, K. , and Gutz, D.A. 1989. Impact and force control. Proc. IEEE Int. Conf. on Robotics and Automation, Scottsdale, AZ, pp. 410-416.