The contact pressure is considered for an elastomeric rectangular seal with rounded edges. An asymptotic matching is performed between an available analytical expression of the contact pressure that neglects the finiteness of the seal dimensions and a fracture mechanics solution describing a periodically laterally cracked strip of finite width. This matching provides a corrected formula for the peak contact pressure that accounts for the finiteness of the seal dimensions. The analytical expression for the peak contact pressure is validated versus finite element predictions for a large family of seal geometries and, in particular, for a seal reference shape extracted from the pertinent literature. An appraisal of the finite deformation effect has been carried out numerically.
NikasGKAlmondRVBurridgeG. Experimental study of leakage and friction of rectangular, elastomeric, hydraulic seals for reciprocating motion from −54 to +135 °C and pressures from 3.4 to 34.5 MPa. Tribol T2014; 57(5): 846–865.
2.
GeorgeAFStrozziARichJI.Stress fields in a compressed unconstrained elastomeric O-ring seal and a comparison of computer predictions and experimental results. Tribol Int1987; 20(5): 237–247.
3.
RuskellLEC. A rapidly converging theoretical solution of the elastohydrodynamic problem for rectangular rubber seals. J Mech Eng Sci1980; 22(1): 9–16.
4.
StrozziA.Static stresses in an unpressurized, rounded, rectangular, elastomeric seal. ASLE Trans1986; 29(4): 558–564.
5.
StrozziABaldiniAGiacopiniM. Normalization of the stress concentrations at the rounded edges of a shaft–hub interference fit. J Strain Anal Eng2011; 46(6): 478–491.
6.
CiavarellaMHillsDAMonnoG.The influence of rounded edges on indentation by a flat punch. Proc IMechE, Part C: J Mechanical Engineering Science1998; 212(4): 319–328.
7.
StrozziABertocchiEBaldiniA. On the applicability of the Boussinesq influence function in modelling the frictionless elastic contact between a rectangular indenter with rounded edges and a half-plane. Proc IMechE, Part C: J Mechanical Engineering Science2015; 229: 987–1001.
8.
SackfieldAMugaduABarberJR. The application of asymptotic solutions to characterising the process zone in almost complete frictionless contacts. J Mech Phys Solids2003; 51(7): 1333–1346.
9.
BanerjeeNHillsDADiniD.The derivation and application of a semi-infinite flat and rounded asymptotic frictionless contact. Int J Mech Sci2009; 51: 662–666.
10.
PratiEStrozziA.A study of the elastohydrodynamic problem in rectangular elastomeric seals. J Tribol: T ASME1984; 106(4): 505–512.
11.
NikasGK.Elastohydrodynamics and mechanics of rectangular elastomeric seals for reciprocating piston rods. J Tribol: T ASME2003; 125(1): 60–69.
12.
NikasGK.Analytical study of the extrusion of rectangular elastomeric seals for linear hydraulic actuators. Proc IMechE, Part J: J Engineering Tribology2003; 217(5): 365–373.
13.
NikasGK.Transient elastohydrodynamic lubrication of rectangular elastomeric seals for linear hydraulic actuators. Proc IMechE, Part J: J Engineering Tribology2003; 217(6): 461–473.
14.
NikasGKSaylesRS.Nonlinear elasticity of rectangular elastomeric seals and its effect on elastohydrodynamic numerical analysis. Tribol Int2004; 37(8): 651–660.
15.
NikasGKSaylesRS.Modelling and optimization of composite rectangular reciprocating seals. Proc IMechE, Part J: J Engineering Tribology2006; 220(4): 395–412.
16.
NikasGKSaylesRS.Study of leakage and friction of flexible seals for steady motion via a numerical approximation method. Tribol Int2006; 39(9): 921–936.
17.
NikasGKSaylesRS.Computational model of tandem rectangular elastomeric seals for reciprocating motion. Tribol Int2006; 39(7): 622–634.
18.
StupkiewiczSMarciniszynA.Elastohydrodynamic lubrication and finite configuration changes in reciprocating elastomeric seals. Tribol Int2009; 42(5): 615–627.
19.
MedriGStrozziA.Mechanical analysis of elastomeric seals by numerical methods. Ind Eng Chem Prod RD1984; 23(4): 596–600.
20.
RanaASaylesRNikasGK. An experimental technique for investigating the sealing principles of reciprocating elastomeric seals for use in linear hydraulic actuator assemblies. In: Proceedings of the 2nd world tribology congress, Vienna, 3–7 September 2001, p.172. Vienna: The Austrian Tribology Society.
21.
DowsonDSwalesPD. The development of elastohydrodynamic conditions in a reciprocating seal. In: Proceedings of the 4th international conference on fluid sealing, Philadelphia, PA, 5–6 May 1969, vol. 2, pp.2–10. Cranfield: British Hydromechanics Research Association.
22.
FieldGJNauBS. An experimental study of reciprocating rubber seals. In: Proceedings of the institution of mechanical engineers, symposium on elastohydrodynamic lubrication, Leeds, 11–13 April 1972, pp.29–36. St. Edmunds, London: Professional Engineering Publishing.
23.
FieldGJNauBS. Film thickness and friction measurements during reciprocation of a rectangular section rubber seal ring. In: Proceedings of the sixth BHRA international conference on fluid sealing, Munich, 27 February–2 March 1973, vol. 5, pp.45–56. Cranfield: British Hydromechanics Research Association.
24.
FieldGJNauBS.A theoretical study of the elastohydrodynamic lubrication of reciprocating rubber seals. ASLE Trans1975; 18(1): 48–54.
StupnickiJ.Photoelastic study of the influence of oil film on contact stresses. Int J Mech Sci1971; 13(3): 243–250.
27.
DragoniEStrozziA.Theoretical analysis of an unpressurized elastomeric O-ring seal inserted into a rectangular groove. Wear1989; 130(1): 41–51.
28.
StrozziAUnsworthA. An appraisal of the paper by O’Carrol et al. (1990). Proc IMechE, Part H: J Engineering in Medicine1995; 209(3): 203–205.
29.
LindleyPB.Engineering design with natural rubber. London: Natural Rubber Producers’ Research Association, 1970.
30.
AllenPWLindleyPBPayneAR.Use of rubber in engineering. London: Maclaren & Sons, Ltd, 1976.
31.
StrozziA.Contact stresses in hip replacements. PhD Thesis, Durham University, Durham, 1992.
32.
HolowniaBP.Effect of Poisson’s ratio on bonded rubber blocks. J Strain Anal Eng1972; 7(3): 236–242.
33.
MedriGStrozziA.Stress–strain fields in compressed elastomeric seals and their extension to fracture mechanics. Rubber Chem Technol1986; 59(5): 709–721.
34.
TadaHParisPCIrwinGR.The stress analysis of cracks handbook. New York: ASME, 2000, pp.55–56.
35.
JefferyGB.Plane stress and plane strain in bipolar co-ordinates. Proc R Soc Lon Ser: A1921; 221: 265–293.
SmithRNLDella-VenturaD. A superposition method for the solution of crack problems. Commun Numer Meth En1995; 11(3): 243–254.
38.
JohnsonKL.One hundred years of Hertz contact. Proc Instn Mech Engrs1982; 196(1): 363–378.
39.
OlukokoOABeckerAAFennerRT.Three benchmark examples for frictional contact modelling using finite element and boundary element methods. J Strain Anal Eng1993; 28: 293–301.
