Effect of Interactions between Interface Modifiers and Viscosity Modifiers on the Performance and Processibility of the Rice Hulls-HDPE Composites

Abstract

Coupling agents are used in wood plastic composites to improve interfacial adhesion between natural fibers and polymers. However, improvement in interfacial adhesion leads to increased melt viscosity, thereby affecting the processing rate. To overcome this limitation, viscosity modifiers are added. Since interface modifiers and viscosity modifiers are chemically active substances, there is a high possibility of interactions between them. To investigate this point, the effect of interactions between viscosity modifiers and an interface modifier on melt flow viscosity and mechanical properties of the composite were analyzed. The results showed that the acrylated maleated polyethylene based interface modifier interacts synergistically with the partially halogenated viscosity modifier, whereas its interaction is antagonistic with the carboxylic acid amide based viscosity modifier.

Keywords

wood plastic composites interface modifiers viscosity modifiers

Get full access to this article

View all access options for this article.

References

Clemons, C. (2002). Wood-plastic Composites in the United States - The Interfacing of the Two Industries , Forest Products Journal, 52(6): 10-18 .

Jiang, H. H. and Kamdem, D. P. (2004). Effects of Copper Amine Treatment on Mechanical Properties of PVC-wood Flour Composites , Journal of Vinyl & Additive Technology, 10(2): 70-78 .

Franco, P. J. H. and Gonzalez, A. V. (2005). In: Natural Fibers, Biopolymers and Biocomposites, p. 231-231, Taylor and Francis, Boca Raton, FL .

Selke, S. E. and Wichman, I. (2004). Wood Fiber/Polyolefin Composites , Composites Part: A Applied Science and Manufacturing, 35(3): 321-326 .

Raj, R. G. , Kokta, B. V. and Nizio, J. D. (1992). Studies on Mechanical-Properties of Polyethylene-organic Fiber Composites 1. Nut Shell Flour , Journal of Applied Polymer Science, 45(1): 91-101 .

Disson, J. P. and Girois, S. (2003). Acrylic Process Aids for PVC: From Theoretical Concepts to Practical Use , Journal of Vinyl & Additive Technology, 9(4): 177-187 .

Markarian, J. (2002). Plastic , Additives and Compounding, 4(11): 18-21 .

Shah, B. L. , Matuana, L. M. and Heiden, P. A. (2005). Novel Coupling Agents for PVC-wood-flour Composites , Journal of Vinyl & Additive Technology, 11(4): 160-165 .

Liu, W. , Mishra, M. , Askeland, P. , Drzal, L. T. and Mohanty, A. K. (2005). ‘Green’ Composites from Soy Based Plastic and Pineapple Leaf Fiber: Fabrication and Properties Evaluation , Polymer, 46(8): 2710-2721 .