The Effect of Partial Replacement of Paper Sludge by Commercial Fillers on Natural Rubber Composites

Abstract

The effects of partial or complete replacement of two commercial fillers, carbon black (CB) and silica on cure characteristics, tensile properties, fatigue life, morphological properties, and rubber—filler interaction of paper sludge (PS) filled natural rubber composites were elucidated. Compounding was carried out on a two-roll mill with total filler loading of 30 phr. Results indicate that maximum torque, tensile strength, elongation at break, tensile modulus, and fatigue life increased the cure time while the scorch time decrease with increasing carbon black loading ratio of PS/CB filled natural rubber composites. On the other hand, increased loading of silica in PS/silica weight ratio resulted in an increment in cure time, scorch time, maximum torque, elongation at break, and fatigue life but not significantly altering tensile strength and tensile modulus of the natural rubber composites. In addition, PS/silica filled natural rubber composites exhibit lower maximum torque, tensile properties, and fatigue life compared to the PS/CB filled natural rubber composites. Rubber—filler interaction and SEM micrograph studies proved that the higher interaction between carbon black and natural rubber occurred in PS/CB filled natural rubber composites rather than PS/silica filled natural rubber composites.

Keywords

paper sludge carbon black silica hybrid compounds short-fiber composites.

Get full access to this article

View all access options for this article.

References

El. Nashar, D.E. , Abd. El. Messieh , S.L. and Basta, A.H. (2004). Newsprint Paper Waste as a Fiber Reinforcement in Rubber Composites, J. Appl. Polym. Sci., 91: 3410-3420.

Gassan, J. and Bledzki, A.K. (1997). The Influence of Fiber-surface Treatment on the Mechanical Properties of Jute-Polypropylene Composites, Composites Part A., 28: 1001-1005.

Ansarifar, A. , Lim, H.P. and Nijhawan, R. (2004). Assessment of The Effect of Bifunctional Organosilane on the Bound Rubber and Properties of Some Natural Rubber Compounds, Int. J. Adhesion and Adhesives, 24: 9-22.

Wambua, P. , Ivens, J. and Verpoest, I. (2003). Natural Fibers: Can they Replace Glass in Fibre Reinforced Plastics? Comp. Sci. and Tech., 63: 1259-1264.

Qiao, X. , Zhang, Y. and Zhang, Y. (2003). Ink-eliminated Paper Sludge Flour as Filler for Polypropylene, Polym. and Polym. Comp., 11: 312-326.

Son, J. , Kim, H.J. and Lee, P.W. (2001). Role of Paper Sludge Particle Size and Extrusion Temperature on Performance of Paper Sludge-Thermoplastic Polymer Composites , J. Appl. Polym. Sci., 82: 2709-2718.

Ismail, H. and Salmah, Bakar, A.A. (2005). The Effect of Paper Sludge Content and Size on the Properties of Polypropylene (PP)-Ethylene Propylene Diene Terpolymer (EPDM) Composites, J. Reinforced Plast. and Comp., 24(2): 147-159.

Jang, J. , Chung, H. , Kim, M. and Sung, H. (2000). The Effect of Flame Retardants on the Flammability and Mechanical Properties of Paper-Sludge/Phenolic Composite, Polym. Test., 19: 269-279.

Fuad, M.Y.A. , Ismail, Z. , Ishak, Z.A.M. and Omar, A.K.M. (1996). Application of Rice Husk Ash as Fillers in Polypropylene: Effect of Titanate, Zirconate and Silane Coupling Agents, Eur. Polym. J., 31: 885-893.

10.

Ishak, Z.A.M. , Abu Bakar, A. , Ishiaku, U.S. , Hashim, A.S. and Azahari, B. (1997). An Investigation of the Potential of Rice Husk Ash as a Filler for Epoxidized Natural Rubber - II. Fatigue Behaviour, Eur. Polym. J., 33: 73-79.

11.

Lorenz, O. and Parks, C.R. (1961). The Crosslinking Efficiency of Some Vulcanizing Agents in Natural Rubber, J. Polym. Sci., 50: 299-312.

12.

Barlow, F.W. (1993). Rubber Compounding: Principles, Materials and Techniques, Marcel Dekker, Inc., New York.

13.

Poh, B.T. , Ismail, H. , Quah, E.H. and Chin, P.L. (2001). Cure and Mechanical Properties of Filled SMR L/ENR 25 and SMR L/SBR Blends, J. Appl. Polym. Sci., 81: 47-52.

14.

da Costa, H.M. , Visconte, L.L.Y. , Nunes, R.C.R. and Furtado , C.R.G. (2003). Rice-Husk-Ash-Filled Natural Rubber. II. Partial Replacement of Commercial Fillers and the Effect on the Vulcanization Process, J. Appl. Polym. Sci., 87: 1405-1413.

15.

Ismail, H. , Rusli, A. and Rashid, A.A. (2005). Maleated Natural Rubber as a Coupling Agent for Paper Sludge Filled Natural Rubber Composites, Polym. Test. , 24: 856-862.

16.

Ismail, H. and Anuar, H. (2000). Palm oil Fatty Acid as an Activator in Carbon Black Filled Natural Rubber Compounds: Dynamic Properties, Curing Characteristics, Reversion and Fatigue Studies. Polym. Test., 19: 349-359.

17.

Wolff, S. and Wang, M.-J. (1992). Filler-elastomer Interactions. Part IV. The Effect of the Surface Energies of Fillers on Elastomer Reinforcement, Rubb. Chem. & Technol., 62: 329-342.

18.

Dannenberg, E.M. (1981). Filler Choices in the Rubber Industry - the Incumbents and Some New Candidates, Elastomerics, 113: 30-35.

19.

Ismail, H. , Hong, H.B. , Ping, C.Y. and Abdul Khalil, H.P.S. (2003). Polypropylene/Silica/Rice Husk Ash Hybrid Composites: A Study on the Mechanical, Water Absorption and Morphological Properties, J. Thermoplastic Comp. Mater., 16: 121-137.

20.

Poh, B.T. , Ismail, H. and Tan, K.S. (2002). Effect of Filler Loading on Tensile and Tear Properties of SMR L/ENR 25 and SMR L/SBR Blends Cured via a Semi-efficient Vulcanization System, Polym. Test., 21: 801-806.

21.

Sae-Oui, P. , Rakdee, C. and Thanmathorn , P. (2002). Use of Rice Husk Ash as Filler in Natural Rubber Vulcanizates In Comparison with Other Commercial Fillers, J. Appl. Polym. Sci., 83: 2485-2493.