Systematic experiments have been carried out by monitoring the in-situ pressure and thickness profiles for three different configurations, viz., flat plate, flat plate with a central circular hole, and an L-section using vacuum assisted resin transfer molding (VARTM) process. The effect of anisotropy on resin flow has been quantified by considering uni-directional carbon fiber preforms with 0° and 90° orientation to the flow direction for each configuration. A quasi-isotropic [45°/0°/−45°/90°]S layup has also been included for flat plate case. Additionally, the study has been extended to understand the effect of using high permeability medium for each configuration. Fluid pressure profiles and thickness variation profiles have been obtained using an array of pressure sensors and linear variable differential transformers for each configuration. Experimental data reveal that anisotropy (due to changing fiber orientations), configuration, and gravity significantly change fluid pressure and displacement fields obtained during VARTM.
ChoiMALeeMHChangJ. Permeability modeling of fibrous media in composite processing. J Non Newton Fluid Mech1998; 79: 585–598.
5.
GokceAChohraMAdvaniSG. Permeability estimation algorithm to simultaneously characterize the distribution media and the fabric preform in vacuum assisted resin transfer molding process. Compos Sci Tech2005; 65: 2129–2139.
6.
LiMWangSGuY. Evaluation of through-thickness permeability and the capillary effect in vacuum assisted liquid molding process. Compos Sci Tech2012; 72: 873–878.
CorreiaNCRobitailleFLongAC. Analysis of the vacuum infusion molding process: I. Analytical formulation. Compos Appl Sci Manuf2005; 36: 1645–1656.
9.
Fink BK, Hsiao K, Mathur R, et al. An analytical Vacuum Assisted Resin Transfer Molding (VARTM) flow model. Report for the US Army Research Laboratory. Report No. ARL-TR-2354, 2000. DTIC.
10.
Adhikari D and Gururaja S. Transient analysis of in-plane and through thickness flow during VARTM in the presence of HPM. In: ASME International Mechanical Engineering Congress & Exposition, Montreal, Canada, 14–20 November 2014, paper no. IMECE2014-37628. New York, NY: ASME.
11.
YoungW. A two-layer model for the simulation of the VARTM process with resin distribution layer. Appl Compos Mater2013; 20: 1305–1319.
12.
BayldonJMDanielIM. Flow modeling of the VARTM process including progressive saturation effects. Compos Appl Sci Manuf2009; 40: 1044–1052.
13.
RouhiMSWysockiMLarssonR. Modeling of coupled dual-scale flow-deformation processes in composites manufacturing. Compos Appl Sci Manuf2013; 46: 108–116.
14.
GovignonQBickertonSKellyPA. Simulation of the reinforcement compaction and resin flow during the complete resin infusion process. Compos Appl Sci Manuf2010; 41: 45–57.
15.
YoonMKBaidooJGillespieJWJr. Vacuum Assisted Resin Transfer Molding (VARTM) process incorporating gravitational effects: a closed-form solution. J Compos Mater2005; 39: 2227–2242.
16.
HammamiA. Effect of reinforcement structure on compaction behavior in vacuum infusion process. Polymer Compos2001; 22: 337–348.
17.
RobitailleFGauvinR. Compaction of textile reinforcements for composites manufacturing. II: compaction and relaxation of dry and H2O saturated woven reinforcements. Polymer Compos1998; 19: 543–557.
18.
WilliamsCSGroveSMSummerscalesJ. The compression response of fibre-reinforced plastic plates during manufacture by the resin infusion under flexible tooling method. Compos Appl Sci Manuf1998; 29A: 111–114.
19.
MathurRHeiderDHoffmanC. Flow front measurements and model validation in the Vacuum Assisted Resin Transfer Molding process. Polymer Compos2001; 22: 477–489.
20.
Grimsley BW, Hubert P and Xiaolan S. Flow and compaction during the Vacuum Assisted Resin Transfer Molding process. In: International SAMPE technical conference, Seattle, USA, 5–8 November 2001, paper no.33, pp.140–153. Covina, CA: SAMPE.
21.
FrattaCDKlunkerFErmanniP. A methodology for flow-front estimation in LCM processes based on pressure sensors. Compos Appl Sci Manuf2012; 47: 1–11.
22.
TimmsJBickertonSKellyPA. Laminate thickness and resin pressure evaluation during asymmetric liquid composite molding with flexible tooling. Compos Appl Sci Manuf2012; 43: 621–630.
23.
AnderssonHMLundstromTSGebartBR. Application of Digital Speckle Photography to measure thickness variations in the vacuum infusion process. Polymer Compos2003; 24: 448–455.
24.
Lawrence JM, Simacek P, Frey P, et al. The compaction behavior of fibrous preform materials during the VARTM infusion. In: Cueto E and Chinesta F (eds) 10th ESAFORM Conference on Material Forming, Zaragoza, Spain, 18–20 April 2007, paper no. CP907, pp.1039–1045. New York, NY: AIP Publishing.
25.
GovignonQBickertonSMorrisJ. Full field monitoring of the resin flow and laminate properties during the resin infusion process. Compos Appl Sci Manuf2008; 39: 1412–1426.
26.
TackittKDWalshSM. Experimental study of thickness gradient formation in the VARTM process. Mater Manuf Process2007; 30: 607–627.
27.
ModiDJohnsonMLongA. Analysis of pressure profile and flow progression in the vacuum infusion process. Compos Sci Tech2008; 69: 1458–1464.
Kavlico, PS 162-312 Pressure sensor data sheet (EU), 2013.
31.
RDP Electronics Ltd, GT Precision LVDT Gauging Transducer data sheet. November 2007.
32.
AhnSHLeeWISpringerGS. Measurement of the three-dimensional permeability of fiber preforms using embedded fiber optic sensors. J Compos Mater1995; 29: 714–733.
