The effect of voids on the state of water absorbed in epoxy has been examined using differential scanning calorimetric analysis for a range of void contents (0 to 50%). For void-free specimens, water absorbed is classified as bound water (nonfreezing). Analysis of the medium and high void content specimens revealed water absorbed in three states: free water, freezable bound water, and nonfreezable bound water. The differential scanning calorimetric results show that the proportions of free water and freezable bound water increase with increasing void content, while the content of nonfreezable bound water decreased. Moisture-induced swelling decreased with increasing void content. The swelling is attributed to the content of nonfreezable bound water as determined by differential scanning calorimetric analysis.
WeitsmanYJ.
Fluid sorption data and modeling. In: Ling FF (ed.) Fluid effects in polymers and polymeric composites. Mechanical Engineering Series. Boston, MA: Springer, 2012, pp. 31–68.
4.
NakamuraKHatakeyamaT andHatakeyamaH.
Relationship between hydrogen bonding and bound water in polyhydroxystyrene derivatives. Polymer1983;
24: 871–876.
5.
HatakeyamaTNakamuraK and HatakeyamaH.
Determination of bound water content in polymers by DTA, DSC and TG. Thermochim Acta1988;
123: 153–161.
6.
Trautschold OC. A literature review on the study of moisture in polymers (No. LA-UR–16-23708). Los Alamos, USA: Los Alamos National Laboratory (LANL), 2016.
7.
CarterHG andKiblerKG.
Langmuir-type model for anomalous moisture diffusion in composite resins. J Compos Mater1978;
12: 118–131.
8.
BonniauP andBunsellAR.
A comparative study of water absorption theories applied to glass epoxy composites. J Compos Mater1981;
15: 272–293.
9.
Fan X. Mechanics of moisture for polymers: fundamental concepts and model study. In: EuroSimE 2008, IEEE International Conference, Freiburg im Breisgau, Germany, 20-23 April 2008, pp. 1-14.
10.
PingZHNguyenQTChenSMet al.
States of water in different hydrophilic polymers—DSC and FTIR studies. Polymer2001;
42: 8461–8467.
11.
ZhouJ andLucasJP.
Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy. Polymer1999;
40: 5505–5512.
12.
MaxwellID andPethrickRA.
Dielectric studies of water in epoxy resins. J Appl Polym Sci1983;
28: 2363–2379.
13.
XiaoGZDelamarM andShanahanMER.
Irreversible interactions between water and DGEBA/DDA epoxy resin during hygrothermal aging. J Appl Polym Sci1997;
65: 449–458.
14.
HatakeyamaTTanakaMKishiAet al.
Comparison of measurement techniques for the identification of bound water restrained by polymers. Thermochim Acta2012;
532: 159–163.
15.
AbdelmolaF and CarlssonLA.
Water uptake in epoxy matrix with voids: experiments and modeling. J Compos Mater.. 2019; 53: 1049–1065.
16.
LittleJEYuanX andJonesMI.
Characterisation of voids in fibre reinforced composite materials. NDT & E Int2012;
46: 122–127.
17.
PaciornikS andd’AlmeidaJRM.
Measurement of void content and distribution in composite materials through digital microscopy. J Compos Mater2009;
43: 101–112.
18.
RasbandWS. ImageJ software.
Bethesda, MD:
National Institutes of Health, 2012.
19.
HilliardJE.
Measurement of volume in volume. In: DeHoffRTRhinesFN (eds) Quantitative microscopy.
New York:
McGraw-Hill, 1968, pp.45–76.
20.
SantulliCGilRGLongACet al.
Void content measurements in commingled E-glass/polypropylene composites using image analysis from optical micrographs. Sci Eng Compos Mater2002;
10: 77–90.
21.
PapthanasiouTD andGuellDC. Flow-induced alignment in composite materials.
Cambridge:
Elsevier, 1997.
22.
ASTM D2734. Standard test methods for void content of reinforced plastics.
West Conshohocken, PA:
ASTM International, 2009.
23.
ASTM D5229. Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials.
West Conshohocken, PA:
ASTM International, 1998.
24.
HumeauCDaviesP and JacqueminF.
Moisture diffusion under hydrostatic pressure in composites. Mater Des2016;
96: 90–98.
25.
GaganiAFanYMulianaAHet al.
Micromechanical modeling of anisotropic water diffusion in glass fiber epoxy reinforced composites. J Compos Mater2018;
52: 2321–2335.
26.
NakamuraKHatakeyamaT andHatakeyamaH.
Studies on bound water of cellulose by differential scanning calorimetry. Text Res J1981;
51: 607–613.
27.
HodgeRMEdwardGH and SimonGP.
Water absorption and states of water in semicrystalline poly (vinyl alcohol) films. Polymer1996;
37: 1371–1376.
28.
AdamsonMJ.
Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials. J Mater Sci1980;
15: 1736–1745.
29.
GonzálezMGCabanelasJC and BaselgaJ.
Applications of FTIR on epoxy resins-identification, monitoring the curing process, phase separation and water uptake. In: TheophileT (ed.) Infrared spectroscopy-materials science, engineering and technology.
Rijeka:
InTech, 2012, pp.262–284.
30.
TurnerPS.
Thermal expansion stresses in reinforced plastics. J Res Natl Bur Stand. 1946;
37: 239–250.
