The curing kinetics of two different types of commercial epoxy resins were investigated by means of nonisothermal differential scanning calorimetry (DSC) in this work. The complex curve of measured heat flow of CYCOM 970 epoxy resin was simplified with the method of resolution of peak. Two typical autocatalytic curing reaction curves were gained and the kinetic parameters of the curing process were demonstrated by combination of those two reactions. The Kissinger method was adopted to obtain the values of the activation energy. The parameters of curing kinetic model were acquired according to the fitting of Kamal model. Isothermal DSC curve of CYCOM 970 epoxy resin obtained using the experimental data shows a good agreement with that theoretically calculated. Then, 603 epoxy resin was investigated by the simplified method and the kinetic parameters were received through the same procedure. The nonisothermal DSC curve tested according to the recommended cure cycle of 603 epoxy resin is also consistent with the calculated results. This improved simplified approach provides an effective method to analyze the curing kinetics of the epoxy resins with complex DSC curves as similar to this study.
LeeSSpringerGS. Effects of cure on the mechanical properties of composites. J Compos Mater1988; 22: 15–29.
2.
LabroniciMIshidaH. Effect of degree of cure and fiber content on the mechanical and dynamic mechanical properties of carbon fiber reinforced PMR-15 polyimide composites. Polym Compos1999; 20: 515–523.
3.
LiQLiXMengY. Curing of DGEBA epoxy using a phenol-terminated hyperbranched curing agent: cure kinetics, gelation, and the TTT cure diagram. Thermochim Acta2012; 549: 69–80.
RoUDCa CavalCNMustaǎF. Cure kinetics of epoxy resins studied by non-isothermal DSC data. Thermochim Acta2002; 383: 119–127.
6.
VyazovkinSChrissafisKDi LorenzoML. ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations. Thermochim Acta2014; 590: 1–23.
7.
KimJSLeeDG. Measurement of the degree of cure of carbon fiber epoxy composite materials. J Compos Mater1996; 30: 1436–1457.
8.
ChailleuxESalviaMJaffrezic-RenaultN. In situ study of the epoxy cure process using a fibre-optic sensor. Smart Mater Struct2001; 10: 194–202.
9.
YangMWangDSunN. Rheological behaviour and cure kinetic studies of a trifunctional phenylethynyl-terminated imide oligomer. High Perform Polym2015; 27: 449–457.
10.
HardisRJessopJLPPetersFE. Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA. Compos A Appl Sci Manuf2013; 49: 100–108.
11.
JavdanitehranMBergDCDuemichenE. An iterative approach for isothermal curing kinetics modelling of an epoxy resin system. Thermochim Acta2016; 623: 72–79.
12.
VyazovkinSBurnhamAKCriadoJM. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data. Thermochim Acta2011; 520: 1–19.
BarbosaAQDa SilvaLFMAbenojarJ. Kinetic analysis and characterization of an epoxy/cork adhesive. Thermochim Acta2015; 604: 52–60.
15.
MenXChengYChenG. Curing behaviour and thermal properties of epoxy resin cured by aromatic diamine with carborane. High Perform Polym2015; 27: 497–509.
16.
StarinkMJ. The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods. Thermochim Acta2003; 404: 163–176.
17.
TanGTangDMuT. The validity of nonlinear isoconversional method in the kinetic analysis of calcium carbonate decomposition under isothermal and non-isothermal conditions. Thermochim Acta2014; 585: 21–24.
18.
KimYCMinHYuJ. Nonlinear and complex cure kinetics of ultra-thin glass fiber epoxy prepreg with highly-loaded silica bead under isothermal and dynamic-heating conditions. Thermochim Acta2016; 644: 28–32.
19.
VyazovkinSWightCA. Model-free and model-fitting approaches to kinetic analysis of isothermal and nonisothermal data. Thermochim Acta1999; 340–341: 53–68.
20.
SahaBMaitiAKGhoshalAK. Model-free method for isothermal and non-isothermal decomposition kinetics analysis of PET sample. Thermochim Acta2006; 444: 46–52.
21.
GuoBCWanJJLeiYD. Curing behaviour of epoxy resin/graphite composites containing ionic liquid. J Phys D Appl Phys2009; 42: 145307.
22.
ArshadMAMaaroufiA. An innovative reaction model determination methodology in solid state kinetics based on variable activation energy. Thermochim Acta2014; 585: 25–35.
RenRXiongXMaX. Isothermal curing kinetics and mechanism of DGEBA epoxy resin with phthalide-containing aromatic diamine. Thermochim Acta2016; 623: 15–21.
25.
Restrepo-ZapataNCOsswaldTAHernandez-OrtizJP. Method for Time-temperature-transformation diagrams using DSC data: linseed aliphatic epoxy resin. J Appl Polym Sci2014; 131: 40566.
26.
TripathiGSrivastavaD. Cure kinetics of ternary blends of epoxy resins studied by nonisothermal DSC data. J Appl Polym Sci2009; 112: 3119–3126.
27.
WangXJinJSongM. Effect of graphene oxide sheet size on the curing kinetics and thermal stability of epoxy resins. Mater Res Express2016; 3: 105303.
28.
ChenYXiZZhaoL. Curing kinetics of bio-based epoxy resin based on epoxidized soybean oil and green curing agent. AIChE J2016; 63: 147–153.
29.
MousaviSRAmraeiIA. Influence of nanosilica and methyl methacrylate-butadiene-styrene core-shell rubber particles on the physical-mechanical properties and cure kinetics of diglycidyl ether of bisphenol-A-based epoxy resin. High Perform Polym2016; 28: 809–819.
30.
PaluvaiNRMohantySNayakSK. Cure kinetics of exfoliated bio-based epoxy/clay nanocomposites developed from acrylated epoxidized castor oil and diglycidyl ether bisphenol A networks. High Perform Polym2015; 27: 918–929.
31.
ZhengXLiDFengC. Thermal properties and non-isothermal curing kinetics of carbon nanotubes/ionic liquid/epoxy resin systems. Thermochim Acta2015; 618: 18–25.
