The large volumes of wastes generated by industrialised society has led to efforts to find practical uses for these wastes, whilst also offsetting the consumption of natural resources. This paper describes the use of an innovative rotary kiln to produce synthetic aggregates from a variety of waste streams. The main waste used was a quarry fines which was blended with either paper sludge, clay, or a dredged harbour sediment. The different combinations were extruded and fired in the kiln to produce a material suitable for natural aggregate replacement. Two of the synthetic aggregates produced were tested by incorporation in to concrete as coarse aggregate replacement. The concrete 28-day compressive strengths achieved were above 40 N mm-2 and compared favourably with control concretes made with natural aggregates and a commercially available lightweight aggregate (Lytag). Leaching tests have also been carried out to assess the potential environmental impact of utilisation. Although not finalised, these tests have also given favourable results.
AKN (Arbeitskreis Nassbaggerei der Wasser- und Schifffahrtverwaltung des Bundes). (1990) Jahresbaggermengen 1990 in den Bundesstrassen des Kuestengebiets (alte Bundeslaender) (Working Group on dredging of the Federal Waterway and Shipping Administration: Annual volumes of dredged material 1990 in Federal Waterways in Coastal Waters - old Federal States).
2.
Building Materials Decree. (1995). Staatsblad van het Koninkrijk der Nederlanden, 567.
3.
BMV Bundesministerium fuer Verkehr (1991) Jahresbaggermengen in den Bundeswasserstrassen (alte Bundeslaender) - Erlass BW 15/52.06.00 vom 09.07.1991; Bonn. (Federal Ministry of Transport, 1991: Annual volumes of dredged material from Federal Waterways - old Federal States).
4.
BSI (British Standards Institute) (1975) Methods for the Testing of Aggregates for use in Concrete: Part 2. The Determination of Relative Density and Water Absorption. BS 812.
5.
BSI (British Standards Institute) (1990) Lightweight Aggregate for use in Masonry Units and Structural Concrete. BS 3797.
6.
Dearnaley, M. P., Burt N. T., Carpenter, K., Nottage, A. S. & Stevenson, J. R. (1995) Beneficial Use of Muddy Dredged Material. In: WODA (World Organisation of Dredging Associations)14th World Dredging Congress - Dredging Benefits. 1, 333-344, Amsterdam, The Netherlands.
7.
DETR (Department of the Environment, Transport, and the Regions) (1997) Digest of Environmental Statistics number 19. London, HMSO.
8.
DETR (1998) Digest of Environmental Statistics number 20. London, HMSO.
9.
DoE (Department of the Environment and the Welsh Office) (1995) Making Waste Work - A strategy for sustainable waste management in England and Wales. London:HMSO.
10.
EEA (European Environment Agency) (1998) Europe’s Environment: The Second Assessment. Office for official publications of the European Communities, Luxembourg. Elsevier Science Ltd.
11.
Kosson, D. S. & Van der Sloot, H. A.Integration of Testing Protocols for Evaluation of Contaminant Release from Monolithic and Granular Wastes. In: Goumans, G.J.Senden & van der Sloot H.A.(ed.) Waste Materials In Construction - Putting Theory into Practice. Studies in Environmental Science 71. Elsevier Science Publishers, Amsterdam, 1997, 201-216.
12.
Köthe, H. (1995) Criteria for beneficial use or the disposal of contaminated dredged material in the Federal Republic of Germany. Central dredging Association. In: WODA (World Organisation of Dredging Associations)14th World Dredging Congress - Dredging Benefits. 1, 459-474, Amsterdam, The Netherlands.
13.
NNI (1995) Leaching characteristics of solid earthy and stony building and waste materials; Leaching tests; Determination of the leaching of inorganic components from granular materials with the column test. Dutch standard NEN 7343.
14.
OECD (1997) Environmental Data Compendium. Paris, OECD.
15.
Osada, M. (1997) Direct Melting Process for MSW Recycling. In: Waste Materials in Construction: Putting Theory into Practice. Goumans, J. J. J. M.et al. (eds). Elsevier. Amsterdam. pp73-78.
16.
Owens, P. L. (1993) Lightweight Aggregates for Structural Concrete. In: Clarke, J. L. (eds.) Structural Lightweight Aggregate Concrete. London, UK. Blackie Academic and Professional. pp 1-18.
17.
Parks, L. F. & Sherwen, R. G. (1986) The Use of New Materials in an Improved Design of Rotary Kiln. Materials & Design7, 252-255.
18.
Price, W. (1995) Lightweight Concrete for the North Sea: the BP Harding (Forth) Field Gravity Base Tank. Quarterly Journal of the Federation de la Precontrainte2, 3-7.
19.
Riley, C. M. (1951) Relation of Chemical Properties to the Bloating of Clays. Journal of the American Ceramic Society.34, 121-128.
20.
Rockliff, D. (1996) Low-Grade quarry products, reclaimed aggregates and inert wastes. Their use in unbound mixtures for road pavements. Waste Management and Research16, 83-85.
21.
van der Sloot, H. A., Heasman, L. & Quevauviller, Ph. (eds.) (1997) Harmonization of Leaching/Extraction tests. Studies in Environmental Science. 70. Amsterdam. Elsevier Science. Amsterdam, p. 292.
22.
van der Sloot, H. A., Hoede, D., Cresswell, D. J. F. & Barton, J. R. (2000) Leaching behaviour of synthetic aggregates. In: Woolley, et al. (eds.) Waste Materials in Construction: Science and Engineering of Recycling for Environmental Protection. Waste Management Series, Vol. 1. Pergamon. p.695.
23.
van der Sloot, H. A. (2000) Comparison of the characteristic leaching behaviour of cements using standard (en 196-1) cement-mortar and an assessment of their long-term environmental behaviour in construction products during service life and recycling. Cement & Concrete Research30, 1-18.
24.
van Gemert, W. J. Th., Quakernaat, J. & van Veen, H. J. (1988) Methods for the Treatment of Contaminated Dredged sediments. In: Salomous, W. & Foerster, U. (eds.) Environmental Management of solid waste. Springer-Verlag. Berlin. p 44.
25.
Wainwright, P. J. & Boni, S. P. K. (1981) Artificial Aggregate from Domestic Refuse. Concrete.5, 25-29.
26.
Wainwright, P. J. & Boni, S. P. K. (1983) Some Properties of Concrete Containing Sintered Domestic Refuse as a Coarse Aggregate. Magazine of Concrete Research. 35, 75-85.
27.
Wainwright, P. J. & Robery, P. (1991). Production and Properties of Sintered Incinerator Residues as Aggregates for Concrete. In: Goumans, J. J. J. M.et al. (eds.) Waste Materials in Construction - Proceedings of the International Conference on the Environmental Implications of Construction with Waste. Elsevier. Amsterdam. pp 425-432.
28.
Woolley, G.R. (1994) State-of-the-art report. Use of waste materials in Construction - Technical Development In: Goumans, J. J. J. M.et al. (eds.) Environmental Aspects of Construction with Waste Materials. Amsterdam. Elsevier. pp.963-977.
29.
Yasuda, Y. (1991) Sewage Sludge Utilisation Technology in Tokyo. Water Science Technology23, 1743-1752.
