The application of pneumatic jigging in the recovery of metallic fraction from shredded printed wiring boards

Abstract

Waste electrical and electronic equipment (WEEE) is one of the fastest growing waste streams worldwide with volumes increasing by 40% each year. WEEE has attracted increasing concern worldwide due to its high metal content and the potential environmental threat which results from uncontrolled recycling practices. Innovative physical separation techniques for WEEE recycling are preferential compared with chemical methods because of the reduction of energy and chemical consumption as well as potential environmental threats. Pneumatic jigging is a dry separation process capable of achieving good separation of coarse material within a very narrow density range, which makes it suitable as a pretreatment process for WEEE recycling. The work presented in this paper investigates the potential application of pneumatic jigging in metal recovery from WEEE. A pilot scale pneumatic jig has been developed by University of Nottingham Ningbo to separate shredded printed wiring boards into two streams: a light fraction (mainly non-metallic fraction consisting of glass fiber, fluffs, and plastic pieces) and dense fraction (metallic fraction). The novelty of work presented in this paper is the application of a dry separation technique in WEEE recycling for metal recovery. Compared with conventional wet separation processes involved in WEEE recycling industry, dry separation has the advantage of zero secondary pollution. The results of this experimental program show pneumatic jigging to be an effective and environmental friendly technique as a pretreatment process for the recovery of the metallic fraction from shredded WEEE.

Keywords

WEEE pneumatic separation jigging printed wiring board metal recycling

Get full access to this article

View all access options for this article.

References

Bas

Deveci

Yazici

(2014) Treatment of manufacturing scrap TV boards by nitric acid leaching. Separation and Purification Technology 130: 151–159.

Beniuk

Vadeikis

Enraght-Moony

(1994) Centrifugal jigging of gravity concentrate and tailing at Renison Limited. Minerals Engineering 7: 577–589.

Bennett

Edwards

Goyos-Ball

. (2009) Separation of mixed WEEE plastics. Banbury, UK: Waste & Resources Action Programme.

Bigum

Brogaard

Christensen

(2012) Metal recovery from high-grade WEEE: a life cycle assessment. Journal of Hazardous Materials 207–208: 8–14.

Boylu

Tali

Çetinel

. (2014) Effect of fluidizing characteristics on upgrading of lignitic coals in gravity based air jig. International Journal of Mineral Processing 129: 27–35.

Brandl

Bosshard

Wegmann

(2001) Computer-munching microbes: metal leaching from electronic scrap by bacteria and fungi. Hydrometallurgy 59: 319–326.

Cazacliu

Sampaio

Miltzarek

. (2014) The potential of using air jigging to sort recycled aggregates. Journal of Cleaner Production 66: 46–53.

De Jong

TPR

Dalmijn

(1997) Improving jigging results of non-ferrous car scrap by application of an intermediate layer. International Journal of Mineral Processing 49: 59–72.

Gupta

Yan

(2006) Gravity separation. In: Yan

AGS

(ed) Mineral Processing Design and Operation. Amsterdam: Elsevier Science, Chapter 15.

10.

Habib

Miles

Hall

(2013) Recovering metallic fractions from waste electrical and electronic equipment by a novel vibration system. Waste Management 33: 722–729.

11.

Hall

Williams

(2007) Separation and recovery of materials from scrap printed circuit boards. Resources, Conservation and Recycling 51: 691–709.

12.

Ding

(2008) Research on recovery logistics network of waste electronic and electrical equipment in China. In: 3rd IEEE conference on industrial electronics and applications (ICIEA 2008), 3–5 June 2008, pp.1797–1802.

13.

(2014) The status and development of treatment techniques of typical waste electrical and electronic equipment in China: a review. Waste Management Research 32: 254–269.

14.

Herat

Agamuthu

(2012) E-waste: a problem or an opportunity? Review of issues, challenges and solutions in Asian countries. Waste Management Research 30: 1113–1129.

15.

Ito

Tsunekawa

Ishida

. (2010( Reverse jig separation of shredded floating plastics – separation of polypropylene and high density polyethylene. International Journal of Mineral Processing 97: 96–99.

16.

Labunska

Abdallah

MA-E

Eulaers

. (2015) Human dietary intake of organohalogen contaminants at e-waste recycling sites in Eastern China. Environment International 74: 209–220.

17.

Lai

(2003) Anthropological survey report on e-waste dismantling in Guiyu, Shantou. Anthropology Department, Zhongshan University, Greenpeace China.

18.

Duan

Y-P

Huang

. (2014) Polybrominated diphenyl ethers in e-waste: level and transfer in a typical e-waste recycling site in Shanghai, Eastern China. Waste Management 34: 1059–1065.

19.

Luo

Fan

Zhao

. (2008) Density-dependent separation of dry fine coal in a vibrated fluidized bed. Powder Technology 187: 119–123.

20.

Marhual

N.P

Pradhan

Kar

. (2008) Differential bioleaching of copper by mesophilic and moderately thermophilic acidophilic consortium enriched from same copper mine water sample. Bioresource Technology 99: 8331–8336.

21.

Marketsandmarkets.com (2011) Global E-Waste Management Market (2011–2016). Available at: http://www.marketsandmarkets.com/Market-Reports/electronic-waste-management-market-373.html (accessed 20 February 2015).

22.

Mukherjee

Mishra

(2006) An integral assessment of the role of critical process parameters on jigging. International Journal of Mineral Processing 81: 187–200.

23.

Naudé

Lorenzen

Kolesnikov

. (2013) Observations on the separation of iron ore in a prototype batch jig. International Journal of Mineral Processing 120: 43–47.

24.

Panda

Sahoo

Tripathy

. (2012) Application of artificial neural network to study the performance of jig for beneficiation of non-coking coal. Fuel 97: 151–156.

25.

Perry

Green

Maloney

(1997) Solid–solid operations and equipment. In: Perry’s Chemical Engineers’ Handbook. 7th ed. McGraw Hill.

26.

Rong

Lyman

(1991) Modelling jig bed stratification in a pilot scale Baum jig. Minerals Engineering 4: 611–623.

27.

Rong

Lyman

(1993) A new energy dissipation theory of jig bed stratification. Part 1. Energy dissipation analysis in a pilot scale baum jig. International Journal of Mineral Processing 37: 165–188.

28.

Sampaio

Aliaga

Pacheco

. (2008) Coal beneficiation of Candiota mine by dry jigging. Fuel Processing Technology 89: 198–202.

29.

Schluep

Hagelueken

Kuehr

. (2009) Sustainable Innovation and Technology Transfer Industrial Sector Studies. Recycling: From E-Waste to Resources. Berlin: United Nations Environment Programme.

30.

Senouci

Medles

Dascalescu

(2013) Effective solutions for monitoring the electrostatic separation of metal and plastic granular waste from electric and electronic equipment. Waste Management Research 31: 160–168.

31.

Shinde

(2014) Investigation of air jigging and air classification to recover metallic particles from analytical samples. MSc Thesis, Michigan Technological University, USA.

32.

Singh

Das

(2013) Analysis of separation response of Kelsey centrifugal jig in processing fine coal. Fuel Processing Technology 115: 71–78.

33.

Song

(2015) A review on human health consequences of metals exposure to e-waste in China. Environmental Pollution 196: 450–461.

34.

Tavares

King

(1995) A useful model for the calculation of the performance of batch and continuous jigs. Coal Preparation 15: 99–128.

35.

Tsunekawa

Naoi

Ogawa

. (2005) Jig separation of plastics from scrapped copy machines. International Journal of Mineral Processing 76: 67–74.

36.

Tuncuk

Stazi

Akcil

. (2012) Aqueous metal recovery techniques from e-scrap: hydrometallurgy in recycling. Minerals Engineering 25: 28–37.

37.

Wong

CSC

Duzgoren-Aydin

Aydin

. (2007) Evidence of excessive releases of metals from primitive e-waste processing in Guiyu, China. Environmental Pollution 148: 62–72.

38.

Xiu

F-R

Zhang

F-S

(2013) Recovery of metals from waste printed circuit boards by supercritical water pre-treatment combined with acid leaching process. Waste Management 33: 1251–1257.

39.

Yazici

Deveci

(2014) Ferric sulphate leaching of metals from waste printed circuit boards. International Journal of Mineral Processing 133: 39–45.

40.

Williams

(2009) Waste electrical and electronic equipment recycling in China: practices and strategies. In: IEEE international symposium on, sustainable systems and technology, 2009 (ISSST’09), 18–20 May 2009, paper 1–1.