The set of important properties of polymers necessary for their use as fuel cell membranes, such as film-forming properties, stability in acidic aqueous media, thermal stability, proton conductivity, is determined by their chemical structure, which provides not only basic and fragmentary mobility of the polymer chain but also complex supramolecular structural features (in particular, phase separation). The effect of the chemical structure of aromatic polyimide sulfonic acids, containing a fragment of 4,4′-diamino[1,1′-biphenyl]-2,2′-disulfonic acid (BDSA), on their membrane-forming properties is discussed, as well as the membrane stability under the conditions of a hydrogen-air fuel cell. The research is aimed at investigating sulfonated polyimides based on the commercially available rigid monomer - BDSA and flexible dianhydrides with an electron donor in their structure. As a model for this study, two aromatic anhydrides with flexible -O- bonds were chosen for investigating the potential of corresponding polyimide films in application to proton exchange membranes. The synthesized sulfonic acid polyimide BDSA-SPI-4(H) is of interest as a proton-conducting membrane polymer for direct energy conversion electrochemical devices and has shown to be a promising material for this group of devices. It is suggested that the presence of the flexible electron donor bonds in the structure of dianhydride should increase the stability of the membranes prepared from BDSA. The properties of polyimide sulfonic acids from the aforementioned diamine and dianhydrides of different fragmentary flexibility implemented in this work could help the understanding of the connection between chemical structure and properties of the material in application to proton exchange membranes development.
SteeleBCHHeinzelA. Materials for fuel-cell technologies. Nature2001; 414: 345–352.
2.
HamnettA. Introduction to fuel-cell types. In: VielstichWLammAGasteigerHA (eds). Handbook fuel cells-fundamentals, technology applications. Chichester: John Wiley & Sons Ltd, 2003, pp. 351–395.
3.
ParkCHLeeCHGuiverMD, et al.Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs). Prog Polym Sci2011; 36: 1443–1498.
4.
BargalMHSAbdelkareemMAATaoQ, et al.Liquid cooling techniques in proton exchange membrane fuel cell stacks: a detailed survey. Alexandria Eng J2020; 59(2): 635–655.
5.
WangYChenKSMishlerJ, et al.A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research. Appl Energy2011; 88(4): 981–1007.
6.
OgawaTKamiguchiKTamakiT, et al.Differentiating grotthuss proton conduction mechanisms by nuclear magnetic resonance spectroscopic analysis of frozen samples. Anal Chem2014; 86(19): 9362–9366.
7.
PrimachenkoONMarinenkoEAOdinokovAS, et al.State of the art and prospects in the development of proton‐conducting perfluorinated membranes with short side chains: a review. Polym Advanced Technology2021; 32(4): 1386–1408.
8.
BorupRMeyersJPivovarB, et al.Scientific aspects of polymer electrolyte fuel cell durability and degradation. Chem Rev2007; 107(10): 3904–3951.
9.
HicknerMAGhassemiHKimYS, et al.Alternative polymer systems for proton exchange membranes (PEMs). Chem Rev2004; 104: 4587–4612.
10.
LeemansR. Fuel cells. In: KreuerKD (ed) Selected entries from the encyclopedia of sustainability science and technology. New York, NY: Springer, 2013.
11.
RusanovALLikhatchevDKostoglodovPV, et al.Proton-exchanging electrolyte membranes based on aromatic condensation polymers. Adv Polym Sci (2005) 179: 83–134.
12.
GuoXFangJWatariT, et al.Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 2. Synthesis and proton conductivity of polyimides from 9, 9-bis (4-aminophenyl) fluorene-2, 7-disulfonic acid. Macromolecules2002; 35 (17): 6707–6713.
13.
FangJGuoXHaradaS, et al.Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 1. Synthesis, proton conductivity, and water stability of polyimides from 4, 4 ‘-diaminodiphenyl ether-2, 2 ‘-disulfonic acid. Macromolecules2002; 35(24):9022–9028.
14.
YinYFangJWatariT, et al.Synthesis and properties of highly sulfonated proton conducting polyimides from bis(3-sulfopropoxy)benzidine diamines. J Mater Chem2004; 14: 1062–1070.
15.
YinYFangJCuiY, et al.Synthesis, proton conductivity and methanol permeability of a novel sulfonated polyimide from 3-(2,4_-diaminophenoxy)propane sulfonic acid. Polymer2003; 44: 4509–4518.
16.
Abu-OrabiFMKailaniMHSweilehBA, et al.Sulfonated polyimide copolymers based on 4,4′-diaminostilbene-2,2′-disulfonic acid and 3,5,3′,5′-tetramethylbenzidine with enhanced solubility. Polym Bull2017; 74: 895–909.
17.
ZhangYLittMSavinellRF, et al.Molecular design of polyimides toward high proton conducting materials. Polym Prepr Am Chem Soc Div Polym Chem2000; 41(2):1561–1562.
18.
KimHLittM. Molecular design of polyimides toward high proton conducting materials, Polym Prepr (Am Chem Soc Div Polym Chem)2001; 42: 486.
LiuYWTangLSQuLJ, et al.Synthesis and properties of high performance functional polyimides containing rigid nonplanar conjugated fluorene moieties. Chin J Polym Sci2019; 37: 416–427.
23.
GhassemiHMcGrathJEZawodzinskiTA. Multiblock sulfonatedfluorinated poly(arylene ether)s for a proton exchange membrane fuel cell. Polymer2006; 47: 4132–4139.
24.
LeeH-SBadamiASRoyA, et al.Segmented sulfonated poly(arylene ether sulfone)-b-polyimide copolymers for proton exchange membrane fuel cells. I. Copolymer synthesis and fundamental properties. J Polym Sci A Polym Chem2007; 45: 4879–4890.
25.
RoyAYuXDunnS, et al.Influence of microstructure and chemical composition on proton exchange membrane properties of sulfonated–fluorinated, hydrophilic-hydrophobic multiblock copolymers. J Membr Sci2009; 327: 118–124.
26.
GhassemiHNdipGMcGrathJE. New multiblock copolymers of sulfonated poly(4-phenyl-2,5-benzophenone) and poly(arylene ether sulfone) for proton exchange membranes. II. Polymer2004; 45: 5855–5862.
27.
SchusterMKreuerKDAndersenHT, et al.Sulfonated poly(phenylene sulfone) polymers as hydrolytically and thermooxidatively stable proton conducting ionomers. Macromolecules2007; 40: 598–607.
28.
SchusterMDe AraujoCCAtanasovV, et al.Highly sulfonated poly(phenylene sulfone): preparation and stability issues. Macromolecules2009; 42: 3129–3137.
29.
De AraujoCCKreuerKDSchusterM, et al.Poly(p-phenylene sulfone)s with high ion exchange capacity: ionomers with unique microstructural and transport features. Phys Chem Chem Phys2009; 11: 3305–3312.
30.
EinslaMLKimYSHawleyM, et al.Toward improved conductivity of sulfonated aromatic proton exchange membranes at low relative humidity. Chem Mater2008; 20: 5636–5642.
31.
KononovaSVSapeginDAKruchininaEV, et al.Preparation, structure, and pervaporation performance of poly (amide–imide)‐sulfonated polyimide composites. J Appl Polym Sci2019; 136(45): 48197.
32.
SapeginDAGubanovaGNKruchininaEV, et al.On the structure, morphology and transport through limitedly flexible chain sulfonated co-polyimide. Polymer2021; 212: 123–142.
ChiscaSMusteataVESavaI, et al.Dielectric behavior of some aromatic polyimide films. Eur Polym2011; 47: 1186–1197.
36.
SapeginDAKononovaSVGubanovaGN, et al.Selective facilitated fixed-site carrier transport of methanol through sulfonated copolyimide pervaporation membranes for the separation of methanol/toluene mixtures. Sep Purif Technol2019; 236: 116274.
37.
TakekoshiTKochanowskiJEManelloJS, et al.Preparation of dianhydrides containing aromatic ether groups. J Polym Sci1985; 23(6): 1759–1769.
38.
YeYSHuangYJChengCC, et al.A new supramolecular sulfonated polyimide for use in proton exchange membranes for fuelcells. Chem Commun2010; 46: 7554–7556.
39.
FangJGuoXWatariT, et al.Proton conducting polyimides from novel sulfonated diamines. In: MittalKL (ed) Polyimides other high temperature polymers synthesis characterization applications. London: CRC Press, 2003, p. 137.
40.
WangGYamazakiKTanakaM, et al.Polymer electrolyte characteristics of sulfonated block-graft polyimide membranes: influence of block ratio. J Photopolymer Science Technology2016; 29: 259–263.
41.
ArizaMJJonesDJRoziereJ. Role of post-sulfonation thermal treatment in conducting and thermal properties of sulfuric acid sulfonated poly(benzimidazole) membranes. Desalination2002; 147: 183–189.
42.
BaiHHoWSW. New sulfonated polybenzimidazole (SPBI) copolymer-based proton-exchange membranes for fuel cells. J Taiwan Instit Chem Eng2009; 40: 260–267.
