Performance characteristics of a chilled water spirally coiled finned tube in cross flow for air conditioning applications

Abstract

In the present study, the thermo-fluid characteristics of a spirally coiled finned tube in cross flow were experimentally investigated. This investigation covered different design parameters such as curvature ratio, air velocity, flow direction, fin pitch and flow rate of chilled water on performance characteristics of the spirally coiled finned tube. The purpose was to evaluate this kind of the spirally finned-tube cooling coils with particular reference to bare coiled tube. Six test specimens were designed and manufactured with curvature ratios of 0.027, 0.03, 0.04, tube pitches of 18, 20, 30 mm and fin pitches of (33, 22, 11 mm). Experiments were carried out in a pilot wind tunnel with air Reynolds number ranging from 35,500 to 245,000. Two types of chilled water flow directions entering the spiral coil were tested at Reynolds number ranging from 5700 to 25,300, the first was inward flow direction and the other was to outward flow direction. The results revealed that the inward flow direction has significant enhancement effect on the Nusselt number compared with outward flow direction by 37.0% for tube pitch of 18 mm and curvature ratio of 0.027. The decrease of fin pitch enhances the Nusselt number by 21.92% on expense of friction factor by 10.9%. In the case of spirally coiled bare tube, the decreasing of the curvature ratio increases air side Nusselt number by 33.69% on expense of friction factor by 18.36%. General correlations of Nusselt number and air friction factor for bare and finned spirally coiled tube were correlated based on reported experimental data.

Keywords

Heat transfer coefficient spirally coiled tube curvature ratio friction factor

Get full access to this article

View all access options for this article.

References

Dravid

Smith

Merrill

. Effect of secondary fluid on laminar flow heat transfer in helically coiled tubes. AIChE J 1971; 17: 1114–1122.

Patankar

Pratap

Spalding

. Prediction of laminar flow and heat transfer in helically coiled pipes. J Fluid Mech 1974; 62: 539–551.

Yang

Dong

Ebadian

. Laminar forced convection in a helicoidal pipe with finite pitch. Int J Heat Mass Transfer 1995; 38: 853–862.

Rennie TJ and Raghavan GSV. Laminar parallel flow in a tube-in-tube helical heat exchanger. In: AIC 2002 Meeting CSAE/SCGR Program, Saskatoon, Saskatchwan, 14–17 July 2002.

Cengiz

Yasar

Dursun

. Heat transfer and pressure drops in rotating helical pipes. Appl Energy 1995; 50: 85–94.

Cengiz

Yasar

Dursun

. Heat transfer and pressure drops in a heat exchanger with a helical pipe containing inside springs. Energy Convers Manage 1997; 38: 619–624.

Kalb

Seader

. Fully developed viscous-flow heat transfer in curved circular tubes with uniform wall temperature. AIChE J 1974; 20: 340–346.

Naphon

Suwagrai

. Effect of curvature ratios on the heat transfer and flow developments in the horizontal spirally coiled tubes. Int J Heat Mass Transfer 2007; 50: 444–451.

Yao

Berger

. Flow in heated curved pipes. J Fluid Mech 1978; 88: 339–354.

10.

Prusa

Yao

. Numerical solution for fully developed flow in heated curved tubes. J Fluid Mech 1982; 123: 503–522.

11.

Naphon

Wongwises

. A study of the heat transfer characteristics of a compact spiral coil heat exchanger under wet-surface conditions. Exp Therm Fluid Sci 2005; 29: 511–521.

12.

ASRAE. ASHRAE handbook of fundamentals. SI edn, Chap. 14. Atlanta, GA: ASHRAE Inc., 2001.

13.

Nuntaphan

Kiatsiriroat

. Thermal behavior of spiral fin tube bank under dehumidifying process: a case study of inline arrangement. Songklanakarin J Sci Technol 2004; 26(4): 509–519.

14.

Gnielinski V. Heat transfer and pressure drop in helically coiled tubes. In: Proceedings of the 8th International Heat Transfer Conference, vol. 6, San Francisco, USA, 1986, pp.2847–2854. Washington, DC: Taylor and Francis.

15.

Holman

. Experimental methods for engineers, 7th edn. New York: McGraw-Hill, 2001.

16.

Wena

M-Y

C-Y

. Heat-transfer enhancement in fin-and-tube heat exchanger with improved fin design. Appl Therm Eng 2009; 29: 1050–1057.

17.

Wongwises

Naphon

. Heat transfer coefficients under dry- and wet-surface conditions for a spirally coiled finned tube heat exchanger. Int Commun Heat Mass Transfer 2005; 32: 371–385.

18.

Wongwises

Naphon

. Heat transfer characteristics and performance of a spirally coiled heat exchanger under sensible conditions. JSME Int J Ser 2005; 48(4): 810–819.