Redundant singularities versus constraint singularities in parallel mechanisms

Abstract

The paper discusses the redundant singularities versus constraint singularities in relation to the main structural parameters of parallel mechanisms. The formulae of mobility, connectivity, overconstraint and redundancy of parallel mechanisms, recently proposed by the second author of this paper, are used to characterise these singularities and the transition phase between them. By using these formulae, the main properties of three types of singularity are identified. A new combined constraint-redundant singularity is defined and characterised, in connection with constraint and redundant singularities. A reconfigurable eight-bar single-loop mechanism is used to illustrate the three types of singularities. This mechanism has an interesting property to continually transit from one type of singularity to another by remaining always in a singular configuration. The properties of the redundant and constraint-redundant singularities are defined in this paper in relation to the four main structural parameters of a mechanism.

Keywords

Parallel mechanisms reconfigurable mechanisms constraint singularity redundant singularity mobility

Get full access to this article

View all access options for this article.

References

Zlatanov D, Bonev IA and Gosselin CM. Constraint singularities of parallel mechanisms. In: Proceedings of ICRA, Washington, D.C., USA, 2002, pp. 496–502.

Saglia

Dai

Caldwell

. Geometry and kinematic analysis of a redundantly actuated parallel mechanism that eliminates singularity and improves dexterity. Trans ASME J Mech Des 2008; 130(12): 124501.

Joshi

Tsai

. Jacobian analysis of limited-DOF parallel manipulators. Trans ASME J Mech Des 2002; 124: 254–258.

Wolf

Shoham

Park

Investigation of singularities and self-motions of the 3-UPU robot. In: Lenarčič

Thomas

(eds). Advances in robot kinematics, Dordrecht: Kluwer Academic Publishers, 2002, pp. 165–174.

Wolf

Shoham

. Investigation of parallel manipulators using linear complex approximation. Trans ASME J Mech Des 2003; 125: 564–572.

Liu

Lou

. Singularities of parallel manipulators: A geometric treatment. IEEE Trans Robot Autom 2003; 19: 579–594.

Han

Kim

. Kinematic sensitivity analysis of the 3-UPU parallel mechanism. Mech Mach Theory 2002; 37: 787–798.

Gogu

Constrained singularities and the structural parameters of parallel robots. In: Lenarčič

Wenger

(eds). Advances in robot kinematics: Analysis and design, Dordrecht: Springer, 2008, pp. 21–28.

Gogu

. Bifurcation in constraint singularities and structural parameters of parallel mechanisms. Meccanica 2011; 46: 65–74.

10.

Gosselin C and Angeles J. Singularity analysis of closed-loop kinematic chains. IEEE Trans Robot Automat 6(3): 281–290.

11.

Zlatanov D, Fenton RG and Benhabib B. Singularity analysis of mechanisms and manipulators via a velocity-equation model of the instantaneous kinematics. In: Proceedings of ICRA, San Diego, CA, USA, 1994, pp.986–991.

12.

Zlatanov

Fenton

Benhabib

. A unifying framework for classification and interpretation of mechanism singularities. Trans ASME J Mech Des 1995; 117: 566–572.

13.

Dai JS, Huang Z and Lipkin H. Mobility of overconstrained parallel mechanisms. Trans ASME J Mech Des 2006; 128(1): 220–229.

14.

Zhang K and Dai JS. A kirigami-inspired 8R linkage and its evolved overconstrained 6R linkages with the rotational symmetry of order two. Ytans ASME J Mech Robot 2014; 6(2): 021008.

15.

Wei

Dai

. A spatial eight-bar linkage and its association with the deployable platonic mechanism. ASME J Mech Robot 2014; 6: 021010–1.

16.

Gogu

. Structural synthesis of parallel robots, Part 1: Methodology, Dordrecht: Springer, 2008.