Unsteady winglet-cavity tip on leakage flow in a high-pressure turbine stage of low-aspect ratio

Abstract

In an unshrouded high-pressure turbine, the upstream vane wake, vane–blade interaction and blade tip leakage flow indicate complex and unsteady flow characteristics. Considering a high-pressure turbine stage of low-aspect ratio, the effects of the flat tip, cavity tip and winglet-cavity tip on the unsteady flow characteristics are investigated by numerical simulation. The exit Mach number and Reynolds number based on the chord of vane are 0.9 and 5.5×10⁵, respectively. The pressure ratio of stage is 2.4. The time-resolved results indicate that the winglet-cavity tip scheme has smaller time variation of the total performance parameters and obtains a smaller tip leakage mass flow and a higher turbine stage efficient than the other cases. The vane–rotor interaction affects the pressure distribution at the region of blade leading edge remarkably and leads to a large time variation of tip leakage mass flow at the front of blade tip. The unsteady aerodynamic performance is analyzed with entropy-increase distribution at stage outlet and the vane–rotor interaction is discussed by the entropy-increase phase–time and phase–phase diagrams at blade outlet. Compared with the flat tip and cavity tip, the upper passage vortex loss is reduced obviously by the winglet-cavity tip. Thus, it is evaluated that the improvement of turbine stage coefficient with winglet-cavity tip results from the reduction of the upper passage vortex loss.

Keywords

Unsteady flow winglet-cavity tip tip leakage flow low-aspect ratio high-pressure turbine

Get full access to this article

View all access options for this article.

References

Booth

. Tip clearance effects in axial turbomachines: importance of tip clearance flows in turbine design. In: VKI Lecture Series 1985-05, Belgium: Rhode Saint Génese, April 15–19 1985.

Bunker

. A review of turbine blade tip heat transfer. Ann N Y Acad Sci 2006; 934: 64–79.

Bindon

. The measurement and formation of tip clearance loss. J Turbomach 1989; 111: 257–263.

Dey D. Aerodynamic tip desensitization in axial flow turbines. PhD Thesis, Pennsylvania State University, USA, 2001.

Patel KV. Research on a high work axial gas generator turbine. SAE Technical Papers, SAE 800618, 1980.

Harvey

Ramsden

. A computational study of a novel turbine rotor partial shroud. J Turbomach 2001; 123: 534–543.

Harvey NW, Newman DA, Haselbach F, et al. An investigation into a novel turbine rotor winglet: part I – design and model rig test results. In: ASME turbo expo 2006, Barcelona, Spain, 8–11 May 2006, ASME Paper GT2006-90456.

Coull JD, Atkins NR and Hodson HP. High efficiency cavity winglets for high pressure turbines. In: ASME turbo expo 2014, Düsseldorf, Germany, 16–20 June 2014, ASME Paper GT2014-25261.

Behr

Kalfas

Abhari

. Unsteady flow physics and performance of a one and 1/2 stage unshrouded high work turbine. J Turbomach 2006; 129: 348–359.

10.

Miller

Moss

Ainsworth

et al.

Time-resolved vane-rotor interaction in a high-pressure turbine stage. J Turbomach 2003; 125: 1–13.

11.

Gao

Zheng

. Comparative investigation of unsteady flow interactions in endwall regions of shrouded and unshrouded turbines. Comput Fluids 2014; 105: 204–217.

12.

Gao

Zheng

Jia

. Performance improvement of shrouded turbines with the management of casing endwall interaction flows. Energy 2014; 75: 430–442.

13.

Volino RJ, Galvin CD and Brownell CJ. Effects of unsteady wakes on flow through high pressure turbine passages with and without tip gaps. In: ASME Turbo Expo 2014, Düsseldorf, Germany, 16–20 June 2014, ASME Paper GT2014-27006.

14.

Sun H, Li J and Feng ZP. Effects of tip clearance on unsteady flow characteristics in an axial turbine stage. In: ASME turbo expo 2009, Orlando, USA, 8–12 June 2009, ASME Paper GT2009-59828.

15.

Atkins

Thorpe

Ainsworth

. Unsteady effects on transonic turbine blade-tip heat transfer. J Turbomach 2012; 134: 061002–061002.

16.

Sun

Wang

et al.

Numerical investigations on the steady and unsteady leakage flow and heat transfer characteristics of rotor blade squealer tip. J Therm Sci 2011; 20: 304–311.

17.

Zhou K and Zhou C. Unsteady aerodynamics of a flat tip and a winglet tip in a high-pressure turbine. In: ASME Turbo Expo 2016, Seoul, South Korea, 13–17 June 2016, ASME Paper GT2016-56845.

18.

Rai

. Three-dimensional Navier-Stokes simulations of turbine rotor-stator interaction, part 1 methodology. AIAA J Prop Power 1989; 5: 305–311.

19.

Yang DL and Feng ZP. Tip leakage flow and heat transfer predictions for turbine blades. In: ASME turbo expo 2007, Montreal, Canada, 14–17 May 2007, ASME Paper GT2007-27728.

20.

Ameri

Steinthorsson

Rigby

. Effect of squealer tip on rotor heat transfer and efficiency. J Turbomach 1998; 120: 753–759.

21.

Chen SW, Zhou ZH, Cui T, et al. Effects of tip injection on tip clearance flow in a low-pressure turbine stator cascade. In: ASME turbo expo 2014, Düsseldorf, Germany, 16–20 June 2014, ASME Paper GT2014-25185.