Numerical simulation and optimization of aerodynamic noise for claw pole alternator

Abstract

This study aims at minimizing the aerodynamic noise generated by claw pole alternator used in vehicles. In this paper, an effective and efficient hybrid test-analysis engineering approach has been proposed to predict and optimize acoustic performance of claw pole alternator. First, an experimental analysis was performed to predict the main components of the aerodynamic noise generated by the claw pole alternator. Then a hybrid approach was proposed to calculate the aerodynamic noise of the alternator. A computational fluid dynamics model of the claw pole alternator was developed for calculating the flow-field of the alternator. The pressure fluctuation in the flow field was analyzed to validate the computational fluid dynamics simulation. After the computational fluid dynamics simulation, the far-field aerodynamic noise generated by the flow field was calculated by adopting the acoustic finite element method. The accuracy and feasibility of the acoustic finite element model were validated with the experimental data. After the validation, the effects of the cooling fan parameters on the aerodynamic noise of the alternator were discussed and analyzed. According to the sound source information and the generation mechanism of the aerodynamic noise, the blade spacing angle of the cooling fan was optimized by establishing a theoretical model. The blade chord length of the cooling fan, the blade installation angle of the cooling fan and the tilt angle of the grille on end cap were optimized by structuring different surrogate models. After the optimizations, a significant reduction in the noise level of the claw pole alternator was found by the finite element method simulation. The overall sound power level has been decreased by about 6 dB (A).

Keywords

Claw pole alternator aerodynamic noise numerical simulation optimization

Get full access to this article

View all access options for this article.

References

Miner

Beaudoin

Flack

. Laser velocimeter measurements in a centrifugal flow pump. J Turbomach 1989; 111: 205–212.

Brungart

Meyer

Lauchle

. Flow in automotive alternators. Proc IMechE, Part D: J Automobile Engineering 1996; 210: 283–292.

François

. The generation of noise and the response of the structures in asynchronous motors, particularly as far as the flow is concerned. Appl Acoust 1970; 3: 23–45.

Lighthill

. On sound generated aerodynamically I. General Theory Proc R Lond Soc 1952; 211A, 1107: 564–587.

Curle

. The influence of solid boundaries on aerodynamic sound. Proc R Lond Soc 1955; 1187: 505–514.

Ffowcs-Williams

Hawkings

. Theory relating to the noise of rotating machinery. J Sound Vib 1969; 10: 10–21.

Goldstein

. Aeroacoustics, New York, NY: McGraw-Hill International Book Co, 1976, pp. 305–305.

Yijun

Datong

. Review of aerodynamic noise in turbomachinery. Adv Mech 2009; 14: 189–202.

Liu

Tang

. Computation of aerodynamic noise of centrifugal fan using large eddy simulation approach, acoustic analogy, and vortex sound theory. Proc I MechE, Part C: J Mechanical Engineering Science 2007; 221: 1321–1332.

10.

Wang Y W, Dong D W, Xie X, et al. Spectral optimization of fan rotation noise based on vector composition method. In: Key Engineering Materials. Trans Tech Publications, 2014, pp.131–136.

11.

Kim

Jeon

Hur

et al.

Development of a low-noise cooling fan for an alternator using numerical and doe methods. Int J Automotive Technol 2011; 12: 307–314.

12.

Lee

Choi

Kim

et al.

Design of axial fan using inverse design method. J Mech Sci Technol 2008; 22: 1883–1888.

13.

Boltezar

Mesaric

Kuhelj

. The influence of uneven blade spacing on the SPL and noise spectra radiated from radial fans. J Sound Vib 1998; 216: 697–711.

14.

Leifsson

Koziel

. Aerodynamic shape optimization by variable-fidelity computational fluid dynamics models: a review of recent progress. J Computat Sci 2015; 10: 45–54.

15.

Allen

Coates

Trevelyan

. Dynamically controlled variable-fidelity modelling for aircraft structural design optimisation. Proc IMechE, Part G: J Aerospace Engineering 2014; 228: 1434–1449.

16.

Leifsson

Koziel

Bekasiewicz

. Fast low-fidelity wing aerodynamics model for surrogate-based shape optimization. Procedia Comput Sci 2014; 29: 811–820.

17.

Koziel S, Bekasiewicz A and Zieniutycz W. Fast multi-objective antenna design through variable-fidelity EM simulations. In: 16th International Symposium on Antenna Technology and Applied Electromagnetics (ANTEM), 2014. IEEE, 2014, pp.1–2.

18.

Shah

Hosder

Koziel

et al.

Multi-fidelity robust aerodynamic design optimization under mixed uncertainty. Aerosp Sci Technol 2015; 45: 17–29.

19.

Koziel

Ogurtsov

. Multi-objective design of antennas using variable-fidelity simulations and surrogate models. IEEE Transact Antennas Propagat 2013; 61: 5931–5939.

20.

Leifsson

Hermannsson

Koziel

. Optimal shape design of multi-element trawl-doors using local surrogate models. J Computat Sci 2015; 10: 55–62.

21.

Queipo

Haftka

Shyy

et al.

Surrogate-based analysis and optimization. Progr Aerosp Sci 2005; 41: 1–28.

22.

Leifsson

Koziel

. Aerodynamic shape optimization by variable-fidelity computational fluid dynamics models: a review of recent progress. J Computat Sci 2015; 10: 45–54.

23.

China Standards GB/T 6882-2008. Acoustics-determination of sound power levels of noise sources using pressure-precision methods for anechoic and hemi-anechoic rooms, 2008.

24.

Léwy

. Theoretical study of the acoustic benefit of an open rotor with uneven blade spacings. J Acoust Soc Am 1992; 92: 2181–2185.