A gravitational torque-compensated 2-DOF planar robotic arm design and its active control

Abstract

Serial robot manipulators have their servo motors with reduction gears on the link joints. When it comes to hyper-redundant robots, this kind of joint actuation mechanism cannot be implemented since this makes hyper-redundant robots too heavy. Instead, cable driven mechanisms are preferred. However, the positioning accuracy is negatively affected by the cables. This paper addresses the positioning accuracy problem of cable driven hyper-redundant robots by employing a 2-DOF robotic arm whose modules are counter-balanced. While the actuators connected to the base actively do most of the work using cables and springs, light and compact actuators connected to the links produce precise motion. The method will result in compact, light and precise hyper-redundant robotic arms. The above-mentioned procedure governed by a control software including a 2D simulator developed is experimentally proved to be a feasible method to compensate the gravitational torque successfully.

Keywords

Counter-balanced mechanisms gravitational torque compensation hyper-redundant robots robotic arm snake robot

Get full access to this article

View all access options for this article.

References

Shamir

The singularities of redundant robot arms. Int J Rob Res 1990; 9: 113–121.

A balancing technique to stabilize local torque optimization solution of redundant manipulators. J Robot Syst 1996; 13: 177–185.

Hirose

Design of hyper-redundant arm. In: Giralt

Georges

and Hirzinger

Gerhard

(eds) Robotics research. London: Springer, pp.548–557.

Kim

Song

JB.

Low-cost robot arm with 3-DOF counterbalance mechanism. In: Parker

Lynne E.

(ed) Proceedings of IEEE international conference on robotics and automation, Karlsruhe, Germany, May 6–10, 2013, pp.4183–4188. New York: IEEE

Kim

Song

JB.

Multi-DOF counterbalance mechanism for a service robot arm. IEEE/ASME Trans Mechatron 2014; 19: 1756–1763.

van Dorsser

Barents

Wisse

, et al. Gravity-balanced arm support with energy-free adjustment. J Med Dev Trans ASME 2007; 1: 151–158.

Lauzier

Gosselin

Laliberté

, et al. Adaptive gravity compensation of decoupled parallel and serial manipulators using a passive hydraulic transmission. Proc IMechE, Part C: J Mechanical Engineering Science 2009; 223: 2871–2879.

Klimchik

Pashkevich

Caro

, et al. Calibration of industrial robots with pneumatic gravity compensators. In: IEEE/ASME international conference on advanced intelligent mechatronics (AIM), Munich, Germany, July 3–7, 2017, pp.285–290. New York: IEEE

Gosselin

CM.

Adaptive robotic mechanical systems: a design paradigm. J Mech Des Trans ASME 2006; 128: 192–198.

10.

Azadi

Moradi

Esmaili

Optimal balancing of PUMA-Like robot in predefined path. J Sci Ind Res (India) 2015; 74: 209–211.

11.

Chu

Kuo

CH.

A single-degree-of-freedom self-regulated gravity balancer for adjustable payload. J Mech Robot 2017; 9: 1–8.

12.

Yamamoto

Hirakawa

Horikawa

Load balancer with automatic lifting force compensation. In: Negri

Victor Juliano De

, Perondi

Eduardo André

, Cunha

Mauro André Barbosa

and Horikawa

Oswaldo

(eds) ABCM symposium series in mechatronics, Rio de Janeiro, Brazil, 2010, pp.580–589.

13.

Barajas

Paz

RA.

Autobalancing a generalized gravity equilibrator. Int J Dyn Control 2016; 4: 515–526.

14.

Arakelian

Gravity compensation in robotics. Adv Robot 2016; 30: 79–96.

15.

Lacasse

Lachance

Boisclair

, et al. On the design of a statically balanced serial robot using remote counterweights. In: Lynne E.

Parker

(ed) Proceedings of IEEE international conference on robotics and automation 2013, pp.4189–4194.

16.

Allison

JT.

Plant-limited co-design of an energy-efficient counterbalanced robotic manipulator. In: Volume 3: 38th design automation conference, parts A and B, Chicago, IL, USA, August 12–15, 2012, pp.847–856. New York: American Society of Mechanical Engineers.

17.

Cambera

Feliu-Batlle

Feedback linearizing controller for a single link flexible arm with a passive gravity compensation mechanism. In: Anthony

Maciejewski

(ed) Proceedings of IEEE international conference on intelligent robots and systems, Madrid, Spain, October 1–5, 2018, pp.6404–6410. New York: IEEE

18.

Herder

JL.

Energy-free Systems. Theory, conception and design of statically balanced spring mechanisms. PhD Thesis, Delft University of Technology, Netherlands, 2001.

19.

Hirose

Ishii

Haishi

Float arm V: hyper-redundant manipulator with wire-driven weight-compensation mechanism. Proc IEEE Int Conf Robot Autom 2003; 1: 368–373.

20.

Morita

Kuribara

Shiozawa

, et al. A novel mechanism design for gravity compensation in three dimensional space. IEEE/ASME Int Conf Adv Intell Mechatron 2003; 1: 163–168.

21.

Ulrich

Kumar

Passive mechanical gravity compensation for robot manipulators. In: Proceedings of 1991 IEEE international conference on robotics and automation, Sacramento, California, USA, April 9–11, 1991, pp. 1536–1541. Piscataway, NJ: IEEE Computer Society Press.

22.

Wang

Development and analysis of a gravity-balanced exoskeleton for active rehabilitation training of upper limb. Proc IMechE, Part C: J Mechanical Engineering Science 2016; 230: 3777–3790.

23.

Cho

Kim

Static balancer for the neck of a face robot. Proc IMechE, Part C: J Mechanical Engineering Science 2014; 228: 561–568.

24.

Lian

Sun

Song

, et al. Passive and active gravity compensation of horizontally-mounted 3-R P S parallel kinematic machine. Mech Mach Theory 2016; 104: 190–201.

25.

Ciupitu

Active static balancing of mechatronic systems – an overview. AMM 2015; 811: 253–259.

26.

Kawamura

Hisatsune

Matsusaka

, et al. Adaptive motion control of a robotic arm with movable counterweights. In: Proceedings of the IEEE/ASME international conference on advanced intelligent mechatronics, 2014, pp.882–887. New York, NY: ASME.

27.

van Dorsser

Barents

Wisse

, et al. Energy-free adjustment of gravity equilibrators with application in a mobile arm support. In: Volume 2: 30th annual mechanisms and robotics conference, parts A and B. ASMEDC, Philadelphia, Pennsylvania, USA,September 10–13, 2006, pp.591–599. New York: ASME.

28.

Takesue

Ikematsu

Murayama

, et al. Design and prototype of variable gravity compensation mechanism (VGCM). J Robot Mechatron 2011; 23: 249–257.

29.

Chiang

Chen

DZ.

Design of planar variable-payload balanced articulated manipulators with actuated linear ground-adjacent adjustment. Mech Mach Theory 2017; 109: 296–312.

30.

Martini

Troncossi

Rivola

Algorithm for the static balancing of serial and parallel mechanisms combining counterweights and springs: generation, assessment and ranking of effective design variants. Mech Mach Theory 2019; 137: 336–354.

31.

Ebert-Uphoff

Johnson

Practical considerations for the static balancing of mechanisms of parallel architecture. Proc IMechE, Part K: J Multi-body Dyn 2002; 216: 73–85.

32.

Carricato

Gosselin

A statically balanced Gough/Stewart-type platform: conception, design, and simulation. J Mech Robot 2009; 1: 1–16.

33.

Martini

Gravity compensation of a 6-UPS parallel kinematics machine tool through elastically balanced constant – force generators. FME Trans 2018; 46: 10–16.

34.

Keller

Perrot

Gargiulo

, et al. Demonstration of an ITER relevant remote handling equipment for Tokamak close inspection. In: Christian

Laugier

(ed) 2008 IEEE/RSJ international conference on intelligent robots and systems, Nice, France, Sept, 22–26, 2008, pp.1495–1500. New York: IEEE

35.

Yang

Yan

Han

Nonlinear model of space manipulator joint considering time-variant stiffness and backlash. J Sound Vib 2015; 341: 246–259.

36.

Nguyen

Lin

Kuo

CH.

Gravity compensation design of planar articulated robotic arms using the gear-spring modules. J Mech Robot 2020; 12: 1–11.

37.

Wei

Lai

RS.

Kinematical analyses and transmission efficiency of a preloaded ball screw operating at high rotational speeds. Mech Mach Theory 2011; 46: 880–898.

38.

Ball Screw THK General Catalog (2018), https://tech.thk.com/en/products/pdf_download.php?file=511E_15_BallScrew.pdf (accessed 15 October 2020).

39.

Bulut

Conkur

ES.

A real-time path-planning algorithm with extremely tight maneuvering capabilities for hyper-redundant manipulators. Engineering Science and Technology, an International Journal 2021; 24: 247–258.

40.

Zeng

Zheng

, et al. A closed-loop controller for cable-driven hyper-redundant manipulator with joint angle sensors. In: Proceedings of IEEE international conference on robotics and biomimetics, ROBIO, Dali, China, 6–8 December 2019, pp.2433–2438. New York, NY: IEEE.

41.

Brown

Schwerin

Shammas

, et al. Design and control of a second-generation hyper-redundant mechanism. In: 2007 IEEE/RSJ international conference on intelligent robots and systems, pp.2603–2608. New York, NY: IEEE.

42.

ASDA-B Series User Manual (2009), www.deltaacdrives.com/wp-content/uploads/2012/06/ASDA-B-User-Manual.pdf (accessed 15 October 2020).

43.

4mm Bore Bearing with 13mm Pulley V Groove Track Roller Bearing 4x13x5mm, www.vxb.com/4mm-Bore-Bearing-with-13mm-Pulley-V-Groove-Track-p/v-groove-4x13x5.htm (accessed 15 October 2020).

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.14 MB

0.07 MB