Dynamic modeling and harmonic analysis of surface-mounted three-phase AC permanent magnet synchronous motor

Abstract

CNC machine tools have high requirements for precision and smoothness of motion. As the power source, the performance of the servo motor has a significant impact on the movement of the machine tool. Harmonic is a common phenomenon in motors, which brings adverse effects on the performance of the motor, even the whole machine and the machined parts. Therefore, it’s of great significance to study the source, characteristics, and influencing factors of the harmonics. In this paper, the time domain modeling, simulation, and analysis are carried out for the harmonic phenomenon of the surface-mounted 3-phase AC permanent magnet synchronous motor (PMSM). Firstly, a dynamic model of the servo motor integrated with its control and driving system is established under ideal conditions, and the simulation of the motor running state is realized in the time domain. On this basis, the modeling and simulation are carried out for the inverter dead-zone, cogging torque, rotor mixed-eccentricity, and 3-phase asymmetry, respectively, and the frequency components of the harmonics caused by these factors are obtained. Finally, the influence of load and motor rotational velocity on 3-phase current and torque harmonics is analyzed, and the interactions between the inverter and the motor are investigated. The results show that the inverter and the motor are coupled to each other as an integrated system, and they have impacts on each other. The established model is verified by experiments.

Keywords

Permanent magnet synchronous motor harmonic analysis cogging torque inverter dead-zone rotor eccentricity three-phase asymmetry

Get full access to this article

View all access options for this article.

References

Zuo

Huang

, et al. Modelling, calculation and analysis of electromagnetic force and vibroacoustic behavior of integer-slot permanent magnet synchronous motor considering current harmonics. J Vib Eng Technol 2022; 10(3): 1135–1152.

Liang

Yang

, et al. Feed fluctuation of ball screw feed systems and its effects on part surface quality. Int J Mach Tool Manuf 2016; 101: 1–9.

Zhang

, et al. Integrated modeling and analysis of ball screw feed system and milling process with consideration of multi-excitation effect. Mech Syst Signal Process 2018; 98: 484–505.

Nandi

Ahmed

Toliyat

HA.

Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages. IEEE Trans Energy Convers 2001; 16(3): 253–260.

Kim

Lieu

DK.

Effects of magnetically induced vibration force in brushless permanent-magnet motors. IEEE Trans Magn 2005; 41(6): 2164–2172.

Zuo

, et al. Modeling and analysis of electromagnetic force in interior permanent magnet synchronous motor used for electric vehicles. Proc IMechE, Part C: J Mechanical Engineering Science 2022; 236(13): 7560–7575.

Liang

Luy

Harmonic analysis for induction motors. In: 2006 Canadian conference on electrical and computer engineering, Ottawa, ON, Canada, 2006, pp.172–177.

Zheng

, et al. Effects of static eccentricity on the no-load back electromotive force of external rotor permanent magnet brushless DC motor used as in-wheel motor. IET Electr Power Appl 2019; 13(5): 604–613.

Deng

Liu

, et al. Analytical representation and characteristics optimization for radial electromagnetic force of the switched reluctance motor under airgap eccentricity. Proc IMechE, Part C: J Mechanical Engineering Science 2022; 236(14): 7629–7640.

10.

Zagirnyak

Mamchur

Kalinov

Comparison of induction motor diagnostic methods based on spectra analysis of current and instantaneous power signals. Prz Elektrotechniczn 2012; 88(12): 221–224.

11.

Zagirnyak

Mamchur

Kalinov

A comparison of informative value of motor current and power spectra for the tasks of induction motor diagnostics. In: 2014 16th international power electronics and motion control conference and exposition, Antalya, Turkey, 2014, pp.540–545.

12.

Faiz

Ebrahimi

Akin

, et al. Finite-element transient analysis of induction motors under mixed eccentricity fault. IEEE Trans Magn 2007; 44(1): 66–74.

13.

Zou

Lan

, et al. Analysis of global and local force harmonics and their effects on vibration in permanent magnet synchronous machines. IEEE Trans Energy Convers 2017; 32(4): 1523–1532.

14.

Yang

Zhang

, et al. Dynamic electromechanical coupling resulting from the air-gap fluctuation of the linear motor in machine tools. Int J Mach Tool Manuf 2015; 94: 100–108.

15.

Yang

, et al. Analysis on the multi-dimensional spectrum of the thrust force for the linear motor feed drive system in machine tools. Mech Syst Signal Process 2017; 82: 68–79.

16.

Yang

Liu

, et al. Investigation of the dynamic electromechanical coupling due to the thrust harmonics in the linear motor feed system. Mech Syst Signal Process 2018; 111: 492–508.

17.

Shirvani

Hosseinkhani

Erkorkmaz

Suppression of harmonic positioning errors in ball-screw drives using Adaptive Feedforward Cancellation. Precis Eng 2021; 68: 235–255.

18.

Wang

Feng

, et al. A novel method for smooth low-speed operation of linear feed systems. Precis Eng 2019; 60: 215–221.

19.

Zhang

YW.

Investigation and suppression of harmonics interaction in high-power PWM current-source motor drives. IEEE Trans Power Electr 2014; 30(2): 668–679.

20.

Liang

Wang

Luk

PCK

, et al. Analytical modeling of current harmonic components in PMSM drive with voltage-source inverter by SVPWM technique. IEEE Trans Energy Convers 2014; 29(3): 673–680.

21.

Boys

J T

Handley

P G.

Harmonic analysis of space vector modulated PWM waveforms. IEE Proc B Electr Power Appl 1990, 137(4): 197–204.

22.

Leedy

Nelms

R M.

Harmonic analysis of a space vector PWM inverter using the method of multiple pulses. In: 2006 IEEE international symposium on industrial electronics, Montreal, QC, Canada, 2006, vol. 2, pp.1182–1187.

23.

Krishnan

Permanent magnet synchronous and brushless DC motor drives. Boca Raton, FL: CRC press, 2017.

24.

Space-vector PWM with TMS320C24x/F24x using hardware and software determined switching patterns. Texas Instruments Application Report SPRA524, 1999. https://www.ti.com/lit/pdf/spra524.

25.

Wang

Yang

Study of cogging torque in surface-mounted permanent magnet motors with energy method. J Magn Magn Mater 2003; 267(1): 80–85.