Modelling of temperatures during railway tread braking: Influence of contact conditions and rail cooling effect

Abstract

The temperature rise of wheels and blocks due to frictional heating during railway tread braking along with the transfer of heat through the wheel–rail contact is studied in this paper. In particular, heat partitioning between block, wheel and rail for stop braking cycles is considered. The wheels are of interest because they are a limiting factor for railway tread braking systems. Two types of thermal models are employed to investigate the maximum temperatures over the wheel tread. In a circumferential (plane) model of wheel, block and rail, the heat transfer problem is studied by use of a finite element formulation of the two-dimensional time-dependent convection–diffusion equation. The hot spot phenomenon is simulated by introducing a prescribed wheel-fixed contact pressure distribution between wheel and block. In an axisymmetric (axial) model of wheel, block and rail, the lateral movements of the wheel–rail contact are studied. A general result is that the cooling effect provided by the rail is important when local temperatures on the tread are considered, but not when studying bulk temperatures created in a single stop braking event. Furthermore, it is found from the lateral movements of the wheel–rail contact that slow oscillations result in maximum temperatures over the wheel tread that are somewhat lower than for travelling on straight track (rolling at the rolling circle).

Keywords

Frictional heating finite element analysis heat partition hot spots rail cooling effect railway tread braking temperature wheel–rail contact

Get full access to this article

View all access options for this article.

References

Teimourimanesh S, Lundén R and Vernersson T. Braking capacity of railway wheels—state-of-the-art survey. In: The 16th international wheelset congress, Cape Town, Republic of South Africa, 2010.

Ekberg

Kabo

. Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview. Wear 2005; 258: 1288–1300.

Vernersson

. Thermally induced roughness of tread-braked railway wheels. Part 1: brake rig experiments. Wear 1999; 236(1–2): 96–105.

Vernersson

. Thermally induced roughness of tread braked railway wheels. Part 2: modelling and field measurements. Wear 1999; 236(1–2): 106–116.

Vernersson

. Temperatures at railway tread braking. Part 1: modelling. Proc IMechE, Part F: J Rail Rapid Transit 2007; 221(2): 167–182.

Newcomb TP. Thermal aspects of railway braking. In: The international conference on railway braking, York, UK, 1979, pp. 7--18.

Vernersson

. Temperatures at railway tread braking. Part 2: calibration and numerical examples. Proc IMechE, Part F: J Rail Rapid Transit 2007; 221(4): 429–442.

Vernersson

Lundén

. Temperatures at railway tread braking. Part 3: wheel and block temperatures and the influence of rail chill. Proc IMechE, Part F: J Rail Rapid Transit 2007; 221(4): 443–454.

Parker

Marshall

. The measurement of the temperature of sliding surfaces, with particular reference to railway brake blocks. Proc IMechE 1948; 158: 209–229.

10.

Fec

Sehitoglu

. Thermal-mechanical damage in railroad wheels due to hot spotting. Wear 1985; 102: 31–41.

11.

Cole IS. The effect of localised cyclic heating on railway wheel steels - an investigation into the effects of tread braking. In: The 10th international wheelset congress, Sydney, Australia, 1992, pp. 319--324.

12.

Barber

. Thermoelasticity and contact. J Thermal Stress 1999; 22(4): 513–525.

13.

Anderson

Knapp

. Hot spotting in automotive friction systems. Wear 1990; 135(2): 319–337.

14.

Petersson

. Noise-related roughness of railway wheel treads full-scale testing of brake blocks. Proc IMechE, Part F: J Rail Rapid Transit 2000; 214(2): 63–77.

15.

Ertz

Knothe

. A comparison of analytical and numerical methods for the calculation of temperatures in wheel/rail contact. Wear 2002; 253: 498–508.

16.

Chandrasekharaiah

Debnath

. Continuum mechanics, San Diego, CA: Academic Press, 1994, pp. 595–595.

17.

Heinrich

. Petrov-Galerkin method for multidimensional, time-dependent, convective-diffusion equations. Int J Numer Methods Engng 1987; 24(11): 2201–2215.

18.

Heinrich

. Petrov-Galerkin methods for the time-dependent convective transport equation. Int J Numer Methods Engng 1986; 23(5): 883–901.

19.

Brooks

Hughes

TJR

. Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations. Comput Methods Appl Mech Engng 1982; 32(1-3): 199–259.

20.

Dassault Systèmes. ABAQUS/Standard. Online documentation, Version 6.10, (2011).

21.

Carslaw

Jaeger

. Conduction of heat in solids, Second ed. Oxford, UK: Clarendon Press, 1959, pp. 510–510.

22.

Godet

. The third-body approach: a mechanical view of wear. Wear 1984; 100(1–3): 437–452.

23.

Godet

. Third-bodies in tribology. Wear 1990; 136(1): 29–45.

24.

Laraqi

. Velocity and relative contact size effects on the thermal constriction resistance in sliding solids. Trans ASME, J Heat Transf 1997; 119(1): 173–177.

25.

Rohsenow

Hartnett

Cho

. Handbook of heat transfer, Third ed. New York, NY: McGraw-Hill, 1998.