Temperatures at railway tread braking. Part 1: Modelling

Abstract

A thermal model of railway tread braking is developed for use in routine calculations of wheel and brake block temperatures. Two-dimensional finite-element models of block(s) and wheel are coupled via a contact interface that controls the heat generation and also the heat partitioning between block and wheel through thermal contact resistances. The surface temperature variations around the wheel circumference as caused by frictional heating and intermediate cooling are accounted for in a mean sense, assuming high-speed sliding conditions. The thermal power generated at the block-wheel interface during braking is determined from train braking data. A model for heat transfer from the rolling wheel into the rail is developed where a film with thermal contact resistance is placed at the wheel-rail contact interface. The present model can be used to efficiently design tread braking systems for both freight and passenger trains. It can handle stop braking, drag braking at constant brake power, and also intermediate periods of cooling. The temperature history during a full train route can be calculated. The inclusion of heat transfer from wheel to rail means that the model is useful for comparing brake rig tests, where normally the chilling influence from the rail is not included, with in-field tests. Two companion papers with experimental results supplement the present numerical modelling. A brief numerical example demonstrates the heat partitioning and the influence of rail chill (about 30 per cent) for two braking configurations.

Keywords

frictional heating finite-element analysis temperature heat partitioning railway wheel brake blocks rail chill

Get full access to this article

View all access options for this article.

References

Vernersson

Temperatures at railway tread braking. Part 2: Calibration and numerical examples

Proc. IMechE, Part F: J. Rail and Rapid Transit, 2007, in press.

Vernersson

Lundén

Temperatures at railway tread braking. Part 3: Wheel and block temperature and the influence of rail chill

Proc. IMechE, Part F: J. Rail and Rapid Transit, 2007, in press.

Vernersson

Thermally induced roughness of tread braked railway wheels, Part 1: Brake rig experiments

Wear, 1999, 236, 96–105.

Vernersson

Thermally induced roughness of tread braked railway wheels, Part 2: Modelling and field measurements

Wear, 1999, 236, 106–116.

Vernersson

Petersson

Hiensch

Thermally induced roughness of tread braked railway wheels. In Proceedings of the 12th International Wheelset Congress, Qingdao, China, 1998, pp. 68–75.

Dings

Dittrich

Roughness on Dutch railway wheels and rails

J. Sound Vib., 1996, 193 (1), 103–112.

Sällström

J. H.

Helgen

Vernersson

Lundén

ERS state-of-the-art report, 2003, 43 pp., appendix 71 pp. (Chalmers Applied Mechanics, Gothenburg).

Bazuin

G. J.

(Ed.) State of the art-final report. EuroSabot technical report 1N6G30T1.DA, NS, Utrecht, 1996, 65 pp., annexes.

Sheridan

D. C.

Kutchey

J. A.

Samie

Approaches to the thermal modeling of disc brakes. The Engineering Society for Advancing Mobility Land Sea Air and Space, SAE technical paper 880256, 1988, 15 pp.

10.

Newcomb

T. P.

Thermal aspects of railway braking. In Proceedings of the IMechE International Conference on Railway Braking, University of York, 1979, pp. 7–18.

11.

Balakin

V. A.

Sergienko

V. P.

Komkov

O. Y.

Heat transfer in friction contact zone at engagement of disc clutches and brakes

Sov. J. Frict. Wear, 1997, 18 (4), 450–455.

12.

Dunaevsky

V. V.

Prediction of railroad friction braking temperatures. Prediction of average bulk and average surface temperatures of railroad wheels and brake discs

Tribol. Trans., 1991, 34 (3), 343–352.

13.

Moyar

G. J.

Carlson

F. G.

A simple method for estimating railcar wheel tread temperature rise during braking

Rail Transport, ASME, 1997, 13, 65–74.

14.

Kennedy

F. E.

Surface temperatures in sliding systems - a finite element analysis

ASME J. Lubr. Technol., 1981, 103 (1), 90–96.

15.

Petersson

Two-dimensional finite element simulation of the thermal problem at railway block braking

Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2002, 216, 259–273.

16.

Dufrénoy

Weichert

Prediction of railway disc brake temperatures taking the bearing surface variations into account

Proc. Instn Mech. Engrs, Part F: J. Rail and Rapid Transit, 1995, 209 (F2), 67–76.

17.

Kao

T. K.

Richmond

J. W.

Douarre

Brake disc hot spotting and thermal judder: An experimental and finite element study

Int. J. Vehicle Des., 2000, 23 (3/4), 276–296.

18.

Tirovic

Sarwar

G. A.

Design synthesis of nonsymmetrically loaded high-performance disc brakes, Part 2: Finite element modelling

Proc. Instn Mech. Engrs, Part F: J. Rail and Rapid Transit, 2004, 218 (F2), 89–104.

19.

Thuresson

Influence of material properties on sliding contact braking applications

Wear, 2004, 257 (5–6), 451–460.

20.

Bejan

Theory of rolling contact heat transfer

J. Heat Transf., Trans. ASME, 1989, 111, 257–263.

21.

Moyar

G. J.

Carpenter

G. F.

Rajkumar

B. R.

Heat transfer experiments with braked railcar wheels. ASME paper 86-WA/RT-1, 1986, 16 pp.

22.

Ertz

Knothe

A comparison of analytical and numerical methods for the calculation of temperatures in wheel/rail contact

Wear, 2002, 253, 498–508.

23.

Railway applications.

Wheelsets and bogies - wheels - technical approval procedure - Part 1: forged and rolled wheels. EN 13979–1:2003 E, 2003, 46 pp. (European Committee for Standardization, Brussels).

24.

Technical specification.

Monoblock wheels for tread braked freight cars with axle load 22.5–25 ton. TB 12.430, preliminary edition, 2001, 16 pp. (SJ, Stockholm).

25.

Technical approval of wheels.

Code 510–5, 1st edition, 2003, 112 pp. (International Union of Railways, Paris).

26.

Gupta

Hahn

G. T.

Bastias

P. C.

Rubin

C. A.

Calculations of the frictional heating of a locomotive wheel attending rolling plus sliding

Wear, 1996, 191 (1–2), 237–241.

27.

Holman

J. P.

Heat transfer, 8th edition, 1997, 696 pp. (McGraw-Hill, New York).

28.

Berry

G. A.

Barber

J. R.

The division of frictional heat - a guide to the nature of sliding contact

ASME J. Tribol., 1984, 106, 405–415.

29.

Fletcher

L. S.

Recent developments in contact conductance heat transfer

J. Heat Transf., Trans. ASME, 1988, 110, 1059–1070.

30.

Eriksson

Bergman

Jacobson

On the nature of tribological contact in automotive brakes

Wear, 2002, 252, 26–36.

31.

Laraqi

Velocity and relative contact size effects on the thermal constriction resistance in sliding solids

J. Heat Transf., Trans. ASME, 1997, 119, 173–177.

32.

Tian

Kennedy

F. E.

Contact surface temperature models for finite bodies in dry and boundary lubricated sliding

J. Tribol., 1993, 115, 411–418.

33.

Tian

Kennedy

F. E.

Maximum and average flash temperatures in sliding contacts

ASME J. Tribol., 1994, 116, 167–174.

34.

Carslaw

H. S.

Jaeger

J. C.

Conduction of heat in solids, 2nd edition, 1959, 510 pp. (Clarendon press, Oxford).

35.

Nuthall

S. M.

The effect of eight different brake materials on track circuit resistance. TM PBS 34, 1983, 8 pp. (British Rail Research, Derby).

36.

Rohsenow

W. M.

Hartnett

J. P.

Cho

Y. I.

(Eds) Handbook of heat transfer, 3rd edition, 1998, 1344 pp. (McGraw-Hill, New York).

37.

Kalker

J. J.

Wheel-rail rolling contact theory

Wear, 1991, 144, 243–261.

38.

Lundén

Fatigue durability of tread braked railway wheels - on admissible combinations of axle load, train speed and signalling distance

Proc. Instn Mech. Engrs, Part F: J. Rail and Rapid Transit, 1991, 205 (F1), 21–33.

39.

Vernersson

Lundén

Tread braking of railway wheels - wheel and block temperature and the influence of rail chill. In Proceedings of the 8th International Heavy Haul Conference, Rio de Janeiro, Brazil, 2005, pp. 253–260.