Experimental analysis of the influence of outlet network volume and inlet guide vane positioning on surge behavior in a single-stage low-speed centrifugal compressor

Abstract

The paper focuses on experimental investigation of the influence of outlet network volume and type on the course of surge in a single-stage low-speed centrifugal compressor. The test rig design is based on a 330 mm impeller (tip Mach number of 0.33) coupled with a vaneless diffuser and a scroll. During the measurements, the rig has been successively connected to a four meter long pipe and to an 11.8 m deep well. Time-averaged probing of pressures and temperatures has served to obtain the performance maps with both networks at three different positions of inlet guide vanes. Time-resolved measurements of static pressure were done in three chosen locations of the rig and enabled to trace the formation of flow instabilities at low flow rates. The analysis of received dataset revealed a reasonable impact of network design on the inception moment, quantitative and qualitative traits of deep surge. The most significant changes concerned the frequencies of the first surge harmonics and the nature of the process. “Pipeline-surge” reminded more of a standing wave whereas “plenum-surge”—of a periodic process similar to the ones reported in the referenced studies.

Keywords

Compressor surge outlet network inlet guide vanes

Get full access to this article

View all access options for this article.

References

Pfleiderer

. Die Kreiselpumpen für Flüssigkeiten und Gäse, Berlin-Gottingen-Heidelberg: Springer Verlag, 1955, pp. 428–431.

Greitzer

. Surge and rotating stall in axial flow compressors. Part I: Theoretical compression system model. J Eng Power 1976; 98: 190–198.

Greitzer

. Surge and rotating stall in axial flow compressors. Part II: Experimental results and comparison with theory. J Eng Power 1976; 98: 199–217.

Koyama M, Komatsubara Y, Tsujita H, et al. Effect of plenum volume on rotating stall and surge of centrifugal compressor. In: Proceedings of ISROMAC-7, Honolulu, Hawaii, 1998, pp.1159–1167.

Kabalyk K, Liskiewicz G, Horodko L, et al. Use of pressure spectral maps for analysis of influence of the plenum volume on the surge in centrifugal blower. In: Proceedings of ASME TurboExpo, Dusseldorf, Germany, 16–20 June 2014, paper no. GT2014-26931.

Liskiewicz

Horodko

Stickland

et al.

Identification of phenomena preceding blower surge by means of pressure spectral maps. Exp Therm Fluid Sci 2014; 54: 267–278.

Kabalyk

Kryllowicz

Liskiewicz

et al.

Experimental investigation of the influence of the inlet duct configuration on the unstable operation of a single-stage centrifugal blower. Proc IMechE, Part A: J Power and Energy 2016; 230: 260–271.

Galerkin

. Turbocompressors, Saint-Petersburg: SPbSPU, 2010, pp. 650–650.

Aungier

. Centrifugal compressors: A strategy for aerodynamic design and analysis, New York: ASME Press, 2000, pp. 5–10.

10.

The Polish standard. PN-EN ISO 5167 Pomiary strumienia plynu za pomoca zwezek pomiarowych wbudowanych w calkowicie wypelnione rurociagi o przekroju kolowym.

11.

Evaluation of measurement data – Guide to the expression of uncertainty in measurement. JCGM100:2008.

12.

Harley

Spence

Filsinger

et al.

Meanline modeling of inlet recirculation in automotive turbocharger centrifugal compressors. J Turbomach 2015, pp. 137–137.

13.

Pampreen

. Compressor surge and stall, Concepts ETI, 1993.

14.

Zheng

Liu

. Phenomenon and mechanism of two-regime-surge in a centrifugal compressor. J Turbomach 2015, pp. 137–137.

15.

Tamaki

. Effect of piping systems on surge in centrifugal compressors. J Mech Sci Technol 2008; 22: 1857–1863.

16.

Rodgers

. Centrifugal compressor inlet guide vanes for increased surge margin. J Turbomach 1991; 113: 696–702.

17.

Fink

Cumpsty

Greitzer

. Surge dynamics in a free-spool centrifugal compressor system. J Turbomach 1992; 114: 321–332.

18.

Spakovszky

. Backward travelling rotating stall waves in centrifugal compressors. J Turbomach 2004; 126: 1–12.

19.

Gravdahl

Willems

de Jager

et al.

Modelling of surge in free-spool centrifugal compressors: experimental validation. J Propul Power 2004, pp. 849–857.