Bearing failures are, according to long-term analyses at ebm-papst St. Georgen GmbH & Co. KG, responsible for 90% of all compact fan breakdowns. The working life of a fan can be increased considerably by using a magnetically levitated fan, where the impeller has no contact with the stator. This paper presents the design of a low-cost magnetically levitated fan with passive magnetic bearings (PMBs) to stabilise radial and tilt deflections of the rotor. The application of an optimised viscoelastic support to the stator introduces sufficient damping to the passively stabilised degrees of freedom. The optimisation of the stiffness and damping and the design of the key components, namely the PMB, the active magnetic bearing and the passive damping device is discussed. Finally, the built prototype is presented and the measurement results are analysed.
TianX. Cooling fan reliability: failure criteria, accelerated life testing, modeling and qualification. In Reliability and maintainability symposium, 2006. RAMS’06. Annual, pp. 380–384. DOI:10.1109/RAMS.2006.1677404.
2.
ISO-281. Rolling bearings – dynamic load ratings and rating life, 2007.
3.
OhHAzarianMDasD. A critique of the IPC-9591 standard: Performance parameters for air moving devices. IEEE Trans Device Mater Reliabil2013; 13(1): 146–155.
4.
BooserER. Tribology Data Handbook. Boca Raton, FL: CRC Press, 1997.
5.
IPC-9591. Performance parameters (mechanical, electrical, environmental and quality/reliability) for air moving devices, 2006.
6.
JinXMaEChowT. An investigation into fan reliability. In 2012 IEEE conference on prognostics and system health management (PHM), pp. 1–7. DOI:10.1109/PHM.2012.6228836.
7.
RamonatLZeiffA. Im Dauerlauf, Verschiedene Berechnungen strategischer Ausfälle bei Lüftern. QZ Qualität und Zuverlässigkeit2012; 1.
8.
KimberMSuzukiKKitsunaiN. Pressure and flow rate performance of piezoelectric fans. IEEE Trans Components Pack Technol2009; 32(4): 766–775.
9.
SchachtRHausdorfAWunderleB. Miniaturized frictionless fan concept for thermal management of electronic. In 18th international workshop on thermal investigations of ICs and systems (THERMINIC).
10.
JungmayrGBerrothHJPanholzerM. Design of a highly reliable fan with magnetic bearings. In 14th international symposium on magnetic bearings (ISMB14). URL http://www.magneticbearings.org/.
11.
EarnshawS. On the nature of the molecular forces which regulate the constitution of the luminiferous ether. Trans Camb Philos Soc Lond1848; 7.
12.
BraunbekW. Freischwebende Körper im elektrischen und magnetischen Feld. Z Phys1939; 112: 753–763.
13.
JungmayrGMarthEAmrheinW. Analytical stiffness calculation for permanent magnetic bearings with soft magnetic materials. IEEE Trans Magnetics2014; DOI:10.1109/TMAG.2014.2310437.
14.
YonnetJPLemarquandGHemmerlinS. Stacked structures of passive magnetic bearings. J Appl Phys1991; 70(10): 6633–6635.
15.
LangM. Berechnung und Optimierung von passiven permanentmagnetischen Lagern für rotierende Maschinen. PhD Thesis, TU Berlin, 2003.
16.
MarthEJungmayrGKoblederJ. Realization of a multi-pole permanent magnetic bearing with rotating magnetization. In 14th international symposium on magnetic bearings (ISMB14). URL http://www.magneticbearings.org/.
17.
CasterenDTEHPaulidesJJHLomonovaEA. Modeling the effects of magnetization variations on a permanent magnet based levitation or vibration isolation system. Appl Mech Mater2013; 416–417: 366–372.
18.
LangM. Fast calculation method for the forces and stiffnesses of permanent-magnet bearings. In 8th international symposium on magnetic bearing (ISMB 8). URL http://www.magneticbearings.org/.
19.
JanssenJPaulidesJEncicaL. Analytical modeling of permanent magnets on a soft magnetic support for a suspension system. In International conference on electrical machines and systems. IEEE, pp. 3825–3830.
20.
MarthEJungmayrGPanholzerM. Optimization of stiffness per magnet volume ratio of discrete and continuous halbach type permanent magnetic bearings. In 13th international symposium on magnetic bearings (ISMB13). URL http://www.magneticbearings.org/.
21.
JungmayrGAmrheinWAngelisW. Design of a hybrid magnetic bearing. In The 8th international symposium on magnetic suspension technology, Dresden, Germany.
22.
BauerWAmrheinW. Electrical design and winding selection for a bearingless axial-force/torque motor. In 2012 international symposium on power electronics, electrical drives, automation and motion (SPEEDAM), pp. 1224–1229. DOI:10.1109/SPEEDAM.2012.6264458.
23.
PanholzerMJungmayrGMarthE. Performance and dynamic properties of an active axial bearing. In ISMB 2012, the 13th international symposium on magnetic bearings
24.
SilberSKoppelstätterWWeidenholzerG. MagOpt - optimization tool for mechatronic components. In 14th international symposium on magnetic bearings (ISMB14). URL http://www.magneticbearings.org/.
25.
JungmayrGMarthEPanholzerM. Fast approximate calculation of the radial and tilt stiffness of magnetic bearings using magnetostatic 2D finite element analysis. In 13th international symposium on magnetic bearings (ISMB13). p. 9. URL http://www.magneticbearings.org/.
26.
MeekerD. Finite element method magnetics. User’s manual, Version 42, 2013. URL http://www.femm.info/.
27.
WeidenholzerGSilberSJungmayrG. A flux-based pmsm motor model using rbf interpolation for time-stepping simulations. In IEEE international electric machines drives conference (IEMDC), pp. 1418–1423. DOI:10.1109/IEMDC.2013.6556323.
28.
MarthEJungmayrGAmrheinW. Influence of viscoelastic elements on magnetically passive stabilized degrees of freedom. In 12th international symposium on magnetic bearings (ISMB12). URL http://www.magneticbearings.org/.
29.
BormannA. Elastomerringe zur Schwingungsberuhigung in der Rotordynamik. PhD Thesis, Technische Universität Berlin, 2005.
30.
TschoeglNW. The Phenomenological Theory of Linear Viscoelastic Behavior. Berlin: Springer-Verlag, 1989.
