This article studies a digital hydraulic servo drive driven by a variable speed electric servomotor. Digital displacement control is implemented by using a two-port digital hydraulic power management system having six pistons and 18 on/off control valves. The first port of the digital hydraulic power management system controls the cylinder speed, while the second port is connected to a hydraulic accumulator. The peak power is taken from the accumulator, and the electric servomotor supplies only the average power into the system. An experimentally validated simulation model is used, and the results show a combination of adequate controllability and excellent energy efficiency. The estimated reduction in the size of the electric motor is 57%.
MareJC. Towards more electric drives for embedded applications: (re)discovering the advantages of hydraulics. In: Proceedings of the 7th international fluid power conference, vol. 4 (ed MurrenhoffH), Aachen, 22–24 March 2010, pp.75–86. Aachen: Apprimus Verlag.
2.
MüllerKDornU.Variable speed drives – customer benefits in injection molding machines and presses. In: Proceedings of the 7th international fluid power conference, vol. 4 (ed MurrenhoffH), Aachen, 22–24 March 2010, pp.165–176. Aachen: Apprimus Verlag.
3.
BoesCHelbigA. Electro hydrostatic actuators for industrial applications. In: Proceedings of the 9th international fluid power conference, vol. 2 (ed MurrenhoffH), Aachen, 24–26 March 2014, pp.134–142. Aachen: Fördervereinigung Fluidtechnik e.V.
4.
ZhangSMinavTPietolaM. Improving efficiency of micro excavator with decentralized hydraulics. In: Proceedings of the ASME/BATH 2017 symposium on fluid power and motion control (paper no. FPMC2017-4341), Sarasota, FL, 16–19 October 2017, p.8. New York: ASME.
5.
LinjamaMHuovaMPietolaMet al. Hydraulic hybrid actuator: theoretical aspects and solution alternatives. In: Proceedings of the fourteenth Scandinavian international conference on fluid power (ed LaamanenAHuhtalaKUusi-HeikkiläJ), Tampere, 20–22 May 2015, pp.690–700. Tampere: Tampere University of Technology, http://URN.fi/URN:ISBN:978-952-15-3530-7
6.
HuovaMAaltoALinjamaMet al. Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results. Int J Fluid Power2017; 18: 141–152.
7.
TikkanenSTommilaH.Hybrid pump drive. In: Proceedings of the fourteenth Scandinavian international conference on fluid power (ed LaamanenAHuhtalaKUusi-HeikkiläJ), Tampere, 20–22 May 2015, pp.669–679. Tampere: Tampere University of Technology, http://URN.fi/URN:ISBN:978-952-15-3530-7
8.
GreenMMacphersonJCaldwellNet al. Dexster – the application of a digital displacement® pump to a 16 tonne excavator. In: Proceedings of the BATH/ASME 2018 symposium on fluid power and motion control, Bath, 12–14 September 2018, p.9. New York: ASME.
9.
MadsenEJørgensenJNørgårdCet al. Design optimization of moving magnet actuated valves for digital displacement machines. In: Proceedings of the ASME/BATH 2017 symposium on fluid power and motion control, Sarasota, FL, 16–19 October 2017, p.12. New York: ASME.
10.
NoergaardCBechMChristensenJet al. Modeling and validation of moving coil actuated valve for digital displacement machines. IEEE Trans Ind Electron2018; 11: 8749–8757.
11.
HeikkiläMTammistoJLinjamaMet al. Digital hydraulic power management system – measured characteristics of a second prototype. In: Proceedings of the eighth workshop on digital fluid power (ed Uusi-HeikkiläJLinjamaM), Tampere, 24–25 May 2016, pp.69–81. Tampere: Tampere University of Technology.
12.
LinjamaM. Model-based control of a digital hydraulic transformer-based hybrid actuator. In: Proceedings of the BATH/ASME 2018 symposium on fluid power and motion control, Bath, 12–14 September 2018, p.10. New York: ASME.
13.
CanudasdeWitCOlssonHÅströmKJet al. A new model for control of systems with friction. IEEE Trans Autom Control1995; 40: 419–425.
14.
BeldaK. Mathematical modelling and predictive control of permanent magnet synchronous motor drives. Trans Electr Eng2013; 2: 114–120.
LeinamoE. Hydraulisen testijärjestelmän toteutus kestomagneettimoottorin kuormitushäiriöiden tutkimiseksi. Master’s Thesis, Tampere University of Technology, Tampere, 2018, http://URN.fi/URN:NBN:fi:tty-201802231312
18.
LinjamaMHuovaMBostömPet al. Design and implementation of energy saving digital hydraulic control system. In: Proceedings of the tenth Scandinavian international conference on fluid power, vol. 2 (ed VileniusJKoskinenKTUusi-HeikkiläJ), Tampere, 21–23 May 2007, pp.341–359. Tampere: Tampere University of Technology.
19.
LinjamaMVihtanenHPSipolaAet al. Secondary controlled multi-chamber hydraulic cylinder. In: Proceedings of the 11th Scandinavian international conference on fluid power, Linköping, 2–4 June 2009, p.15. Linköping: Linköping University.
