Damage Monitoring of Carbon Fiber Reinforced Laminates Using Resistance Measurements. Improving Sensitivity Using Carbon Nanotube Doped Epoxy Matrix System

Abstract

In this study, carbon nanotubes (CNTs) were used as additives in the epoxy matrix of unidirectional (UD) carbon fiber reinforced laminates. CNTs were employed not only for improving the mechanical performance of composite, but also for providing an innovative way for monitoring the damage accumulation during the loading of the laminate via the monitoring of the changes in the conductivity of the material. The CNT inclusion improved the transverse conductivity rendering the UD composite more electrically isotropic. Both plain and modified laminates were subjected to monotonic and cyclic tensile loading with simultaneous monitoring of the longitudinal resistance. The resistance change due to mechanical loading was more pronounced for the laminates with the modified matrices. As it was expected, the presence of the electrically conductive CNT network acted as a direct sensor of matrix related damage phenomena, which was complementary to changes related to failure of the reinforcing phase. This was not the case for the reference composite laminates where the monitored changes of the electrical conductivity mirrored the damage exclusively related to the reinforcing phase i.e., the carbon fibers.

Keywords

carbon-nanotubes carbon-fiber-reinforced plastics electrical properties mechanical properties nondestructive testing.

Get full access to this article

View all access options for this article.

References

Arby, J.C. , Bochard, S. , Chateauminois, A. , Salvia, M. and Giraud G. 1999. ``In Situ Detection of Damage in CFRP Laminates by Electrical Resistance Measurements,'' Composites Science and Technology , 59:925-935.

Abry, J.C. , Choi, Y.K. , Chateuminois, A. , Dalloz, B. and Giraud, G. 2001. ``In-situ Monitoring of Damage in CFRP Laminates by Means of AC and DC Measurements,'' Composite Science and Technology , 61:855-864.

Ceysson, O. , Salvia, M. and Vincent, L. 1996. ``Damage Mechanisms Characterisation of Carbon Fibre/Epoxy Composite Laminates by Both Electrical Resistance Measurements and Acoustic Emission Analysis,'' Scripta Materialia, 34/8:1273-1280.

Chen, P.W. and Chung, D.D.L. 1993. ``Carbon Fibre Reinforced Concrete for Smart Structures Capable of Non-destructive Flaw Detection,''. Smart Materials and Structures, 2:22-30.

Kostopoulos, V. , Tsotra, P. , Vavouliotis, A. , Karapappas, P. , Tsantzalis, S. and Loutas, T. 2005. ``Nano-modified Fiber Reinforced Composites: A Way Towards the Development of New Materials for Space Applications'', In: Proc. of 5th ESA Symp. on Micro/Nano Technologies for Space, ESTEC, Noordwijk (ESA-WPP-255).

Kostopoulos, V. , Tsotra, P. , Vavouliotis, A. , Karapappas, P. , Tsantzalis, S. and Loutas, T. 2007a. ``Damage Detection During Fatigue of CNF Doped CFRPs Via Resistance Measurements and AE,'' Solid State Phenomena , 121-123:1399-1402.

Kostopoulos, V. Tsotra, P. Vavouliotis, A. , Karappapas, P. Fiamegkou, E. and Santzalis, S.T. 2007b. ``Improved Sensing Properties of Epoxy Resin Polymers and Carbon Fiber Reinforced Epoxy Resin Composites by the Introduction of Multi-Wall Carbon Nanotubes (MWCNT),'' Presented at AIAA-2007-1859, 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 15th AIAA/ASME/AHS Adaptive Structures Conference , Honolulu, Hawaii, USA, 23-26 April 2007.

Kupke, M. , Schulte, K. and Schuler, R. 2001. ``Non Destructive Testing FRP by d.c. and a.c Electrical Methods,'' Composites Science and Technology, 61:837-847.

Popov, N.V. 2004. ``Carbon Nanotubes: Properties and Application, '' Materials Science and Engineering, R43:61-102.

10.

Prasse, T. , Michel, F. , Mook, G. and Schulte, B.W. 2001. ``A Comparative Investigation of Electrical Resistance and Acoustic Emission During Cyclic Loading of CFRP Laminates, '' Composites Science and Technology, 61:831-835.

11.

Robertson, J. 2004. ``Realistic Application of CNTs,'' Materials Today, 7:46-52.

12.

Schulte, K. and Baron, C.H. 1989. ``Load and Failure Analysis of CFRP Laminates by Means of Electrical Resistivity Measurements,'' Composites Science and Technology, 36:63-79.

13.

Schueler, R. , Joshi, S.P. and Schulte, K. 2001. ``Damage Detection in CFRP by Electrical Conductance Mapping ,'' Composite Science and Technology, 61:921-930.

14.

Seo, D.C. and Lee, J.J. 1999. ``Damage Detection of CFRP Laminates Using Electrical Resistance Measurement and Neural Network,'' Composite Structures , 47:525-530.

15.

Thostenson, E. , Renb, Z. and Choua, T.W. 2001. ``Advances in the Science and Technology of Carbon Nanotubes and Their Composites: A Review,'' Composites Science and Technology , 61:1899-1912.

16.

Todoroki, A. , Matsuura, K. and Kobayashi, H. 1995. ``Application of Electric Potential Method to Smart Composite Structures for Detecting Delamination,'' JSME International Journal, A.38/4:524-530.

17.

Todoroki, A. and Suzuki, H. 2000. ``Health Monitoring of Internal Delamination Cracks for Graphite/Epoxy Composites by Electric Potential Method,'' Applied Mechanics and Engineering, 51:283-294.

18.

Wang, X. and Chung, D.D.L. 1996. ``Continuous Carbon Fibre Epoxy Matrix Composite as a Sensor of Its Own Strain,'' Smart Materials and Structures , 5:796-800.

19.

Wang, X. and Chung, D.D.L. 1998. ``Residual Stress in Carbon Fiber Embedded in Epoxy, Studied by Simultaneous Measurement of Applied Stress and Electrical Resistance, '' Composite Interfaces, 5(3):277-281.

20.

Wang, X. , Wand, S. and Chung, D.D.L. 1999. ``Sensing Damage in Carbon Fiber and its Polymer-matrix and Carbon-matrix Composites by Electrical Resistance Measurements, '' Journal of Materials Science, 34:2703-2713.