Damage Detection for Composite Laminate Plates with A Distributed Hybrid PZT/FBG Sensor Network

Abstract

Debond detection is a critical technique to ensure composite structural safety. Although there are many novel sensors being developed in recent years, piezoelectric transducers (PZT) and fiber Bragg grating (FBG) sensors have been shown as ideal sensors for monitoring structural health. To utilize their merits and overcome their drawbacks a hybrid PZT/FBG system has been developed to detect damage in composite laminate plates. The hybrid diagnostic system combines piezoelectric actuators which input a controlled excitation to the structure and fiber optic sensors which capture the corresponding structural response. Tests have been carried out to demonstrate the feasibility of detecting simulated damage monitoring on an aluminum plate and debond damage on composite plates using the suggested hybrid system. Test results show that the system is capable of detecting damage in both aluminum and composite plates. The major advantage of this system lies in actuator/ sensor decoupling, because they use different mechanisms for signal transmission. It may also offer long distance signal transmission because it utilizes fiber optics to transfer sensor signals to its interrogation system. The potential to sense acoustic stress waves and absolute quasi-static strains with large amount of sensors engraved along a single optical fiber may also increase the practibility of using a PZT/FBG hybrid system.

Keywords

composite structures debond detection hybrid system piezoelectric transducer (PZT)fiber Bragg gratings (FBG).

Get full access to this article

View all access options for this article.

References

Beard, S. et al. 2004. ``Multifunctional Software Suite for Structural Health Monitoring Using SMART Technology,'' In: Proceedings of the 2nd European Workshop on Structural Health Monitoring, Stanford.

Betz, D.C. et al. 2003a. ``Lamb Wave Detection and Source Location Using Fiber Bragg Grating Rosettes,'' In: Proceedings of SPIE , 5050:117-127.

Betz, D.C. et al. 2003b. ``Acousto-ultrasonic Sensing Using Fiber Bragg Gratings,'' Smart Materials and Structures, 12(1): 122-128.

Betz, D.C. et al. 2006a. ``Identification of Structural Damage Using Multifunctional Bragg Grating Sensors I. Theory and Implementation,'' Smart Materials and Structures, 15(5): 1305-1312.

Betz, D.C. et al. 2006b. ``Structural Damage Identification Using Multifunctional Bragg Grating Sensors: II. Damage Detection Results and Analysis,'' Smart Materials and Structures, 15(5):1313-1322.

Blaise, E. and Chang, F.K. 2002. ``Built-in Damage Detection System for Sandwich Structures Under Cryogenic Temperatures,'' In: Proceedings of SPIE, 4701:97-107.

Choi, K. and Chang, F.K. 1996. ``Identification of Impact Force and Location Using Distributed Sensors,'' Journal of AIAA, 34(1):136-142.

Fox, J.J. and Glass, B.J. 2000. ``Impact of Integrated Vehicle Health Management (IVHM) Technologies on Ground Operations for Reusable Launch Vehicles (RLVs) and Spacecraft,'' In: IEEE Aerospace Conference Proceedings , 2:179-186.

González, I.F. , Wu, Z.J. and Chang, F.K. 2005. ``Health Monitoring by Means of Hybrid Diagnostic System,'' In: Chang, F.K. (ed.), Proceeding of Structural Health Monitoring, Stanford.

10.

Han, J.H. , Rew, K.H. and Lee, I. 1997. ``An Experimental Study of Active Vibration Control of Composite Structures with a Piezo-Ceramic Actuator and a Piezo-Film Sensor ,'' Smart Materials and Structures, 6(5):549-558.

11.

Idrissy, R.L. et al. 1998. ``Multiplexed Bragg Grating Optical Fiber Sensors for Damage Evaluation in Highway Bridges,'' Smart Materials and Structures, 7(2):209-216.

12.

Ihn, J.-B. and Chang, F.-K. 2004. ``Detection and Monitoring of Hidden Fatigue Crack Growth Using a Built-in Piezoelectric Sensor/Actuator Network I. Diagnostics,'' Smart Materials and Structures, 13(3):609-620.

13.

Kersey, A.D. et al. 1997. ``Fiber Grating Sensors, '' Journal of Lightwave Technology, 15(8):1442-1463.

14.

Kersey, A.D. , Berkoff, T.A. and Morey, W.W. 1993. ``Multiplexed Fiber Bragg Grating Strain-Sensor System with a Fiber Fabry-Perot Wavelength Filter,'' Optic Letters , 18(16): 1370-1372.

15.

Lin, M. et al. 2001. ``SMART Layer and SMART Suitcase for Structural Health Monitoring Applications,'' In: Proceedings of SPIE on smart structures and material systems, 3329:98-106.

16.

Merzbachery, C.I. , Kersey, A.D. and Friebele, E.J. 1996. ``Fiber Optic Sensors in Concrete Structures: A Review ,'' Smart Materials and Structures, 5(2):196-208.

17.

Minardo, A. et al. 2004. ``Fiber Bragg Gratings as Ultrasonic Waves Sensors,'' In: Proceedings of SPIE, 5502:84-87.

18.

Ogisu, T. et al. 2005. ``Damage Growth Detection of Composite Laminate Structure Using Embedded FBG Sensor/PZT Actuator Hybrid System,'' In: Proceedings of SPIE, 5758:93-104.

19.

Perez, I. , Cui, H.L. and Udd, E. 2001. ``Acoustic Emission Detection Using Fiber Bragg Gratings,'' In: Proceeding of SPIE, 4328:209-215.

20.

Pierce, S.G. et al. 1996. ``Surface-bonded Optical Fibre Sensors for the Inspection of CFRP Plates Using Ultrasonic Lamb waves, '' Smart Materials and Structures, 5(6):776-787.

21.

Qing, X. et al. 2005. ``A Hybrid Piezoelectric/Fiber Optic Diagnostic System for Structural Health Monitoring,'' Smart Materials and Structures, 14(5):98-103.

22.

Rose, J.L. and Ditri, J. , 1992. ``Pulse-echo and Through Transmission Lamb Wave Techniques for Adhesive Bond Inspection,'' British Jr. NDT , 34(12).

23.

Rose, J.L. , Rajana, K. and Hansch, M.K.T. 1995. ``Ultrasonic Guided Waves for NDE of Adhesively Bonded Structures,'' Journal of Adhesion, 50:71-82.

24.

Seydel, R.E. and Chang, F.K. 1999. ``Real-Time Impact Identification of Stiffened Composite Panels,'' In: Proceedings of SPIE, 3668:295-305.

25.

Shin, H.J. , Yi, R. and Rose, J.L. , 1996. ``Defect Detection and Characterization in Power Plant Tubing Using Ultrasonic Guided Waves,'' In: Proceedings of the 14th WCNDT, New Delhi, India, December 8-13, p. 2299.

26.

Shin, H.J. and Rose, J.L. 1998. ``Guided Wave Tuning Principles for Defect Detection in Tubing,'' Journal of Nondestructive Evaluation, 17(1):27-36.

27.

Todd, M. et al. 1999. ``Civil Infrastructure Monitoring with Fiber Bragg Gratings Sensor Arrays,'' In: Chang, F.K. (ed.), Proceedings of Structural Health Monitoring 2000, Technomic, Lancaster, PA. pp. 359-368.

28.

Wang, G. and Pran, K. 2000. ``Ship Hull Structure Monitoring Using Fiber Optic Sensors,'' In: Proceedings of European COST F3 Conference on System Identification & Structure Health Monitoring, Universidad Politécnica de Madrid, Spain, Vol. 1, pp. 15-17.