A nonlinear seat suspension with high-static low-dynamic stiffness based on negative stiffness structure for helicopter

Abstract

One of the most important issues for the helicopter pilots is the health risk due to the vibration transmitted to the pilot through the seat. In this article, a seat suspension based on negative stiffness structure is presented to decrease the vibration transmitted to the pilot in both vertical and lateral directions without losing the loading capacity of the system. Here, an integrated model of the suspension–cushion–occupant is derived. To generalize the results of system analysis and its usability in other applications, the impact of parameters on the system performance is studied in dimensionless form. Despite coupling between the lateral and vertical directions, the design parameters of the seat suspension are determined in such a way that the system responds simultaneously as a negative stiffness structure in both directions. The system efficiency in vibration damping is assessed by seat effective amplitude transmissibility and transmissibility criteria. In addition, the whole body vibration and impact of the vibration on the pilot body are evaluated using ISO-2631. To verify the system efficiency in more realistic situation, the simulations are performed using the measured vibration data of a Bell-412 helicopter. The results indicate that the vibration amplitude is decreased by about 45% and 48% in the lateral and vertical directions, respectively. The frequency spectrum comparison of the seat and cabin floor reveals 80% reduction of amplitude in fundamental frequency in the vertical direction, whereas it is about 93% in the lateral direction. Furthermore, the level of pilot’s comfort and perception is improved that demonstrates better riding quality and reduced vibration environment.

Keywords

Negative stiffness structure nonlinear stiffness structural nonlinearity whole body vibration vibration damping

Get full access to this article

View all access options for this article.

References

Adam

(2004) Results of NVG-induced neck strain questionnaire study in CH-146 Griffon aircrew. Technical Report DRDC Toronto TR 2004-153 Defence Research and Development Canada, Toronto Research Centre, Canada.

Carrella

Brennan

Waters

, et al. (2008) On the design of a high-static-low-dynamic stiffness isolator using linear mechanical springs and magnets. Journal of Sound and Vibration 315(3): 712–720.

Cheng

Wang

, et al. (2017) Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping. Nonlinear Dynamics 87(4): 2267–2279.

Chen

Wickramasinghe

Zimcik

(2009) Development of adaptive seat mounts for helicopter aircrew body vibration reduction. Journal of Vibration and Control 15(12): 1809–1825.

Clark

(2015) Diagnoses of low back pain, active component, U.S. Armed Forces, 2010-2014. MSMR 22(12): 8–11.

Data logger INT2624M (2018) Datasheet, Intellico. https://www.intellico.ir.

Davoodi

Safarpour

Pourgholi

, et al. (2020) Design and evaluation of vibration reducing seat suspension based on negative stiffness structure. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234: 4171–4189. DOI: 10.1177/0954406220921203.

Donati

(2002) Survey of technical preventative measures to reduce whole-body vibration effects when designing mobile machinery. Journal of Sound and Vibration 253(1): 169–183.

Ellis

Littler

(2004) Response of cantilever grandstands to crowd loads. Part 1: serviceability evaluation. Proceedings of the Institution of Civil Engineers - Structures and Buildings 157(4): 235–241.

10.

Hostens

Deprez

Ramon

(2004) An improved design of air suspension for seats of mobile agricultural machines. Journal of Sound and Vibration 276: 141–156. DOI: 10.1016/j.jsv.2003.07.018.

11.

ISO 2631-1 (1997) Mechanical Vibration and Shock: Evaluation of Human Exposure to Whole-Body Vibration-Part 1.

12.

Knothe

Stichel

(2017) Human perception of vibrations - ride comfort. In: Knothe

Stichel

(eds). Rail Vehicle Dynamics. 1st edition. New York: Springer, 141–157.