Ballistic Resistance of 2D and 3D Woven Sandwich Composites

Abstract

In the present study, the ballistic resistance of sandwich composite structures for vehicle armor panel applications is investigated. The core material of each sandwich structure is a layer of tiled alumina ceramic, combined with a layer of two-dimensional (2D)/three-dimensional (3D) S-2 glass-based woven composite laminate, sandwiched between 2D plain weave composite skins. The 2D composite backing consists of a plain woven fiberglass, with fiber orientation predominantly in the direction of plane of the weave. The 3D contains similar in-plane fiber preform structure, with the inclusion of an integral through thickness fiber, creating a 3D structure. The ballistic performance of sandwich composite with several types of 3D woven backings is compared to the baseline 2D plain weave backed sandwiched composites. An IMACON 200 high-speed camera is used to obtain high-speed photographs of the ballistic events of penetration and damage. These images are analyzed to study the real-time damage mechanism of the strike face surface of several targets and subsequently to obtain average resistive force of target points during impact. The velocities of the projectile (M2AP armor piercing bullets) are recorded in all the experiments, and they range from 915 to 975 m/s. Postmortem analyses, which include through thickness sectioning, are performed on each sandwich structure. The results show that armor panels with 3D woven backing have a higher ballistic efficiency than the 2D baseline panels, strike face damage mechanics are predominantly axisymmetric about the impact point and the panels with 3D backing had controlled delamination and fewer complete penetrations.

Keywords

sandwich composite structures armor panels 3D weave ballistic resistance.

Get full access to this article

View all access options for this article.

References

Vasudev, A. and Mehlman, M.J. (1987). A Comparative Study of the Ballistic Performance of Glass Reinforced Plastic Materials, SAMPE Quarterly, 18(4): 43—48.

Bless, S.J. and Hartman, D.R. (1989). Ballistic Penetration of S-2 Glass® Laminates, In: Proc. of 21st International SAMPE Technical Conference, 25—28 September, pp. 852—866.

Viechnicki, D.J. , Anctil, A.A. , Papetti, D.J. and Prifti, J.J. (1989). Lightweight Armor — A Status Report, MTL-TR-89-8, DTIC Doc AD-D150 327.

Fink, B.K. (2000). Performance Metrics for Composite Integral Armor, US Army Research Laboratory Report, ARL-RP-8, Aberdeen Proving Ground, MD, October 2000.

Bogdanovich, A.E. , Singletary, J.N. , Coffelt, R.A. , Gillespie, Jr., J.W. , Gama, B.A. , Yu, C.-J. and Claar, D. (2001). Innovative Processing of Multifunctioning Composite Ground Armor — Phase I Final Report, US Army Research Laboratory Report, ARL-CR-481, Aberdeen Proving Ground, MD, September 2001.

Bogdanovich, A.E. , Singletary, J.N. , Coffelt, R.A. , Gillespie, Jr., J.W. , Gama, B.A. , Yu, C.-J. and Claar, D. (2001). Innovative Processing of Multifunctioning Composite Ground Armor — Bridge Program Final Report, US Army Research Laboratory Report, ARL-CR-480, Aberdeen Proving Ground, MD, September 2001.

Singletary, J. , Bogdanovich, A. , Coffelt, R. , Gama, B.A. , Gillespie, Jr., J.W. , Hoppel, C.P.R. and Fink, B.K. (2001). Ballistic Performance of 3-D Woven Polymer Composites in Integral Armor, In: CD Proceedings of the American Society for Composites, 16th Technical Conference, Blacksburg, VA, 9—12 September, 2001.

Hart, B.F. (2003). Impact of Fabric Cost on Manufacturing Cost of Composite Integral Armor, US Army Research Laboratory Report, ARL-TN-0212 , Aberdeen Proving Ground, MD, November 2003.

Bogdanovich, A. , Coffelt, R. , Grogan, J. and Shukla, A. (2005). Integral 3-D Woven S-2 Glass Fabric Composites for Ballistic Armor Systems, In: CD Proceedings of the 26th International SAMPE Europe Conference, Paris , France, 5—7 April, 2005, pp. 245—250.

10.

Mohamed, M.H. , Bogdanovich, A.E. , Dickinson, L.C. , Singletary, J.N. and Lienhart, R.B. (2001). A New Generation of 3D Woven Fabric Preforms an Composites, SAMPE Journal, 37(3): 8—17.

11.

Tamuzs, V. , Tarasovs, S. , Bogdanovich, A. and Singletary, J. (2002). Fracture Toughness and Bridging Law of 3D Woven Composites, In: Book of Abstracts, 3rd ESIS TC4 Conference on Polymers and Composites, Fracture of Polymers, Composites and Adhesives, Les Diablerets, Switzerland, 15—18 September, 2002.

12.

Tamuzs, V. , Tarasovs, S. , Vilks, U. , Bogdanovich, A. and Singletary, J. (2002). Delamination Fracture Toughness of 3D Woven Composites , In: Booklet of Abstracts, 10th European Conference on Composite Materials (ECCM-10), Brugge, Belgium, 3—7 June, 2002.

13.

Tamuzs, V. , Tarasovs, S. and Vilks, U. (2003). Delamination Properties of Translaminar-Reinforced Composites, Composites Science and Technology, 63(10): 1423—1431.

14.

Bogdanovich, A.E. (2003). Innovative Materials for Lightweight Armor — Phase II Annual Progress Report, US Army Research Laboratory Report, ARL-CR-524, Aberdeen Proving Ground, MD, June 2003.

15.

Czarnecki, G.J. (1998). Estimation of the V50 using Semi-empirical (1-point) Procedures, Composites Part B: Engineering, 29(3): 199—342.