Study of elastic properties of aero-engine metallic materials is of paramount importance because it forms one of the foundations of engineering design of components. Nine isotropic aero-engine metallic materials were studied for their elastic properties for a temperature range varying from ambient to operating limit. Test was carried out in vacuum to prevent oxidation of specimens. Dimensional corrections of the specimen due to thermal expansion were taken into account. Dynamic elastic modulus was evaluated as the average of the moduli that was obtained through first flat and edge flexural mode frequencies. Dynamic shear modulus was established through the first torsional mode of frequency.
Hill WH, Shimmin KD. Elevated temperature dynamic elastic modulus of metallic materials, Wright Air Development Division, Research and Development Command, Wright-Patterson Airforce Base, WADD Technical report 60-438, 1961.
2.
KuoC-M. Effects of disoriented grains on elastic constants of directionally solidified superalloys. Mater Sci Eng2007; A494: 103–112.
3.
Wolfendon A. Dynamic elastic modulus measurement in materials. STP 1045. Ann Arbor, Michigan: ASTM, 1990.
4.
WolfendenAHarmoucheMRBlessingGV. Dynamic Young’s modulus in metallic materials: results of an interlaboratory test programme. J Test Evaluat1989; 17(1): 2–13.
5.
BlessingGVWolfendenAKinraVK. Dynamic shear modulus measurements with four independent techniques in Nickel based alloys. J Test Evaluat1992; 20(4): 321–323.
6.
LatellaBAHumphriesSR. Young’s modulus of 2.25Cr-1 mo at elevated temperature. Scripta Mater2004; 51: 635–639.
7.
ZhouYLNiinomiMAkahoriT. Dynamic Young’s modulus and mechanical properties of Ti-Hf alloys. Mater Trans2004; 45(5): 1549–1554.
8.
ZhouYLNiinomiM. Effect of Nd content on the dynamic elastic modulus and mechanical properties of Titanium-Neodymium alloys. Mater Trans2009; 50(2): 368–372.
9.
Bullough CK. The determination of uncertainties in dynamic Young’s modulus, Manual of codes for the determination of uncertainties in mechanical testing on metallic materials. Code of practice No.13, Standards measurements and testing project no. SMT4-CT97-2165, UNCERT COP13, 2000.
10.
Petley V and Rajendran R. Dynamic elastic properties of aeroengine materials. Internal Report No. ATG/Material Behaviour/2011/01, 2011.
11.
MehriMRAdamsRD. On the flexural vibration of Timoshenko beams, and the applicability of the analysis to a sandwich configuration. J Sound Vib1998; 209: 419–442.
12.
ASTM E-1875. Standard test method for dynamic Young’s modulus, shear modulus, and Poisson’s ratio by sonic resonance. West Conshohocken: ASTM, 2008.
13.
KuhnH-ASockelH-G. Elastic properties of textured and directionally solidified Nickel-based superalloys between 25 and 1200 ℃. Mater Sci Eng1988; A112: 117–126.
