Effect of pre-chamber volume and nozzle number on turbulent jet combustion characteristics of GDI engines

There are few studies on the effect of turbulent jets on the combustion characteristics of passive pre-chamber (PC) gasoline engines, and their mechanism needs to be elucidated. Therefore, a 3-D simulation was performed using CONVERGE software. The results reveal that a modest expansion in the PC volume contributes to combustion due to the increased jet energy, but when it is too large, the above effect is weakened. In this study, at a smaller 0.8 ml volume, the combustion is still similar to traditional spark plug ignition. At middle 1.6 ml volume, the mixture concentration in the PC increases and the uniformity is better, resulting in the highest jet velocity and shortest jet duration, thus achieving the fastest flame propagation and the highest heat release rate (HRR). However, at a larger 1.8–2.0 ml volume, the mixture concentration near the spark-plug is sharply reduced, thus the reduced combustion rate in the PC leads to insufficient jet energy in the subsequent jets and resulting deterioration in combustion. An appropriate increase in nozzle number also improves combustion by introducing more ignition sources. But more nozzles not always improving the combustion. In the eight-nozzle case, three nozzles are close to the exhaust valve so that the intake is inhibited, resulting in a worsening of the ignition. The combustion under six-nozzle shows the highest HRR and shortest combustion duration. However, the combustion deteriorates at eight-nozzle, since the increase in the ignition point is not enough to compensate for the negative impact of the reduced jet intensity on combustion.