Product redesign evaluation: An improved quality function deployment model based on failure modes and effects analysis and 2-tuple linguistic

Abstract

An improved quality function deployment model based on integration of design failure mode and effects analysis and 2-tuple linguistic is proposed to guide the design scheme selection in the product redesign process. By adopting the entropy weight approach, the risk priority number of the risk assessment index is improved. Meanwhile, the improved results are fed back in quality function deployment to reassess the target values. In addition, the accuracy of the model on the basis of 2-tuple linguistic is improved in the process of information evaluation and data processing. Finally, the model is applied in the case of gear reducer to demonstrate its applicability. This model can not only improve the product’s reliability, but also enhance the quality of product by taking the customers’ needs and product’s risk priority number into consideration simultaneously and therefore improve the market competitiveness of the products.

Keywords

Quality function deployment failure modes and effects analysis quality management 2-tuple linguistic decision analysis

Introduction

Failure mode and effects analysis (FMEA) is a process of identifying potential failures to minimize the risk associated with them.¹ FMEA has been widely applied to product design decision-making. For example, Wang and Wei² proposed a dependent linguistic ordered weighted geometric (DLOWG) operator–based FMEA risk evaluation method, in which each factor of risk priority number (RPN) is regarded as a linguistic variable. Rhee and Ishii³ addressed traditional RPN’s drawbacks and introduced life cost–based FMEA, which measures risk based on cost. It is useful for selecting design alternatives and reducing the overall life cycle cost. For reducing medical errors, Su et al.⁴ developed a healthcare failure mode and effects analysis (HFMEA). To improve the low application efficiency of traditional FMEA in the analysis of multi-failure and multi-function products, Zhuo et al.⁵ proposed a reliability design method based on the combination of axiomatic design and FMEA. By completely decomposing the design parameters of system or products adopting independent axiom, they eliminated the influence of design parameters and conducted complete and accurate FMEA analysis for subsystems and components. Mariajayaprakash and Senthilvelan⁶ integrated FMEA with Taguchi method to detect failure and optimize sugar mill boiler. Chang et al.⁷ integrated gray relational analysis with the decision-making trial and evaluation laboratory (DEMATEL) method to rank the risk of failure in FMEA assessment. Recently, there are an increasing number of FMEA models developed based on multiple criteria decision-making (MCDM) methods, for example, based on the MCDM method, Tian et al.⁸ proposed an integrated fuzzy FMEA for risk factor analysis.

To be sustainable, manufacturing companies should consider how to fulfill consumer demand for products.⁹ Sullivan¹⁰ defined quality function deployment (QFD) as “a systematic and structured approach which ensures that customer needs drive the product design and production processes.” Li and Gao¹¹ introduced gray correlation degree in QFD. Ju and Sohn¹² proposed a hierarchical QFD framework that enables one to set R&D priorities and develop the corresponding business models to meet future societal needs. Moldovan¹³ integrated the QFD approach and knowledge management to understand the customer needs. Not only the theory of QFD has been developed continuously, but also the application of QFD has been extended from the motor industry to the whole manufacturing industry and finally even to industries such as software development, health care, and education.^14–16 Since QFD in its ability to identify the most suitable product design alternative and FMEA in its ability to identify the associated risk with that option, they remedy their respective limitations for each other, merged both application together to form a decision tool which not only can effectively guide the quality control in the product design and implementation phases, but also enhance customers’ satisfaction and competitiveness of the product in marketing phase. So recently a lot of models which combine QFD and FMEA have been constructed, for example, Almannai et al.¹⁷ combined QFD and FMEA to develop a decision support tool for the selection of manufacturing automation technologies; based on the advantages of the QFD, FMEA, and activity-based costing (ABC) methods, Hassan et al.¹⁸ developed a cost-based FMEA decision technique for improving the product quality/cost ratio; Guo et al.¹⁹ combined QFD and FMEA to evaluate the element importance of shafting installation, that is why we combined both methods to analyze the quality and failure effects in product redesign.

Owing to the complexity of the product redesign process, the abundance of data, limited knowledge of designers, and the difficulty in quantitative presentation, it is natural for decision-makers to express their preferences by means of incomplete two-tuple linguistic preference relations. Herrera and Martinez²⁰ initiated the 2-tuple linguistic representation model in the IEEE academic journal. Now it becomes a hot research topic and widely used in decision-making problems. There are some new results in 2-tuple linguistic modeling. Li et al.²¹ proposed a personalized individual semantics model by means of an interval numerical scale and the 2-tuple linguistic model, and defined a new computing with words (CW) framework. Dong and Herrera-Viedma²² proposed a consistency-driven automatic methodology to set the interval numerical scales of 2-tuple linguistic term sets with linguistic preference relations. Dong et al.²³ proposed a novel CW methodology where the hesitant fuzzy linguistic term sets can be constructed based on unbalanced linguistic term sets using a numerical scale. Due to differences in knowledge backgrounds and experiences, FMEA team members prefer to utilize multi-granular linguistic term sets to express their assessments of system risk. Ko²⁴ adopted the two-tuple linguistic computational approach to overcome the drawbacks of the conventional RPN calculation method and proposed an improved FMEA model based on QFD. A hybrid risk evaluation model by FMEA was exploited with multi-granular linguistic term sets to express their assessments of system distribution assessments and is used in supercritical water gasification systems.^24,25 Zhang²⁶ developed a novel approach to address multi-criteria group decision-making (MCGDM) problems with multi-granular incomplete 2-tuple fuzzy linguistic preference relations (FLPRs) and unknown weight information.

In this article, a new model is proposed. The product FMEA analysis was conducted first based on the 2-tuple linguistic evaluation method, through which each key failure mode’s risk index RPN can be obtained based on entropy weight. The fault correlation index, namely, F value, is derived from the RPN value. The F value can then be used in QFD analysis to modify the absolute important weight of various technical characteristics of the products obtained in House of Quality (HOQ). This new model, which integrates the FMEA into QFD in the product redesign process, does not only take into account the customer requirements, but also handle the hidden quality problem in the product manufacturing and circulation process.

The rest of this article is organized as follows. In the second part, the 2-tuple linguistic evaluation method is introduced. Then, the feasibility of integrated FMEA and QFD is analyzed. The improved RPN based on entropy weight and index of fault restoration is proposed. The integrated model of FMEA and QFD in the context of 2-tuple linguistic is constructed and the processing flow of this integrated model is also given. In the fourth part, the integrated model proposed is applied in a gear reducer design quality improvement case. Finally, the conclusion summarizes the contribution of this study.

Two-tuple linguistic information processing

2-tuple linguistic evaluation method was first proposed by the Spanish scholar Herrera et al.²⁷ To solve the multi-index clustering analysis problems with linguistic assessment information, Yu and Fan²⁸ introduced the 2-tuple linguistic–based maximal tree clustering method. Mi et al.²⁹ investigated the evaluation of uncertain systems with qualitative and quantitative information by integrating 2-tuple linguistic evaluation with gray clustering. At present, the evaluation based on the 2-tuple linguistic operator and/or fuzzy logic has been widely used in many research fields.^23,30–32

When redesigning the gear reducer, the engineer needs to evaluate the possibility of gear reducer box cracking. One way is to use data from previous products for quantitative analysis; however, after redesign, there are no data to support quantitative analysis of the severity of post-design cracking, which can only be judged by experts or designers. In this case, it is difficult to give quantitative evaluation, for example, the probability is 0.3. They may give qualitative judgments, such as very likely, possible and impossible. In order to reduce the failure possibility, many experts or designers often need to make group decision and often need to consider the multi-dimensional evaluation and balance. This is a typical multi-criteria linguistic decision-making problem.

Linguistic assessment information can be used in FMEA and QFD.²⁴ For FMEA, its most commonly used tool is RPN. In traditional ways, RPN = S × O × D , where S is the severity of the occurred risk, O is the frequency of the occurrence of risk, and D is the detectability of risk. The linguistic assessment information of the three risk factors is divided into 9 degrees, with a typical set of the three failure factor rankings and criteria being defined, as shown in Table 1.

Table 1.

Typical rankings of failure factors.

Level	S	O	D
1	No	Almost never	Almost certain
2	Very slight	Remote	Very high
3	Slight	Very slight	High
4	Minor	Slight	Moderate high
5	Moderate	Low	Medium
6	Significant	Medium	Low
7	Major	Moderately high	Slight
8	Extreme	High	Very high
9	Serious	Very high	Remote

However, due to the complexity of objective things and the fuzziness of human thought, the experts fail to estimate risks precisely using the numerical values. In the core tool of QFD, namely, HOQ, serial numbers (such as 1, 2, and 3) are also utilized to reflect the complex relationships between customers’ needs and engineering characteristics, or even the relationships among all engineering characteristics. Therefore, information loss and distortion are likely to occur due to the deployment step by step. In contrast, the 2-tuple linguistic model uses the 2-tuple $(S_{k}, α_{k})$ to assess linguistic assessment information based on the transfer of symbol. In this way, information loss and distortion are avoided in the integration of linguistic assessment information, thus leading to more accurate results.

The 2-tuple linguistic model uses $(S_{k}, α_{k})$ to represent the evaluation information in natural language. $S_{k}$ is the $k th$ element of the set S and $α_{k}$ represents the distance between the evaluation information and its closest rank in the set S . For example, the linguistic assessment set S containing seven elements (linguistic assessments) is defined as S = {S₆ = FZ (extremely important), S₅ = HZ (very important), S₄ = Z (important), S₃ = YB (common), S₂ = C (low), S₁ = HC (very low), S₀ = FC (extremely low)}. Furthermore, a 2-tuple linguistic can be translated into a crisp number. Its inverse function is defined as

Δ^{- 1} (S_{k}, α_{k}) = k + α_{k} = β

(1)

In this article, three risk factors of FMEA are treated as 2-tuple linguistic $(S_{k}, α_{k})$ . Taking the severity of the occurred risk S as an example, the first element in the 2-tuple linguistic represented by $S_{k}$ is the $k th$ element in the set S and the language evaluation set S can be defined as S = {S₈ = serious hazard, S₇ = very high effect, S₆ = high effect, S₅ = medium effect, S₄ = low effect, S₃ = very low effect, S₂ = slight effect, S₁ = very slight effect, S₀ = no effect}. $α_{k}$ represents the distance between the evaluation information and its closest rank from S₈ to S₀.

The evaluation of the importance of customers’ demand in QFD, the relationship matrix between customers’ requirements and engineering characteristics, the complex relationship matrix of each engineering characteristic, and the customer’s competition are all expressed using these two factors: linguistic evaluation set and the differences between linguistic and linguistic evaluation of language, namely, the 2-tuple $(S_{k}, α_{k})$ .

The proposed methodology

Improved RPN based on entropy weight

Entropy is the function of the system’s chaos, which describes the state of the system. The greater the entropy, the greater the uncertainty of the system. Shannon³³ first proposed the concept of information entropy and statistical mechanics entropy, and emphasized the concept of “information quantity,” that is, the more the information is, the more regular the system structure is, the more perfect the function is, and the smaller the entropy is. Supposing that there are n possible results: $A_{1}, A_{2}, \dots, A_{n}$ assuming that the probability of their emergence is $P_{1}, P_{2}, \dots, P_{n}$ , then the entropy of the test is usually defined as

H = - K \sum_{i = 1}^{n} p_{i} \log_{2} p_{i}

(2)

In equation (2), $K = 1 / \ln n$ and H is the entropy of the probability set $P_{1}, P_{2}, \dots, P_{n}$ . The value of H uses the binary to show the degree of uncertainty information. Then, the “information” and entropy have been linked, which has opened up the new application domain of human knowledge. Before the experiment, entropy is a measurement of the uncertainty of the results, and after the completion of the experiment, entropy is a measurement of the information obtained from the experiment, namely, the amount of information.

In this article, FMEA was given three risk index weights. According to the thought of entropy, the amount and quality of information that people obtained in decision-making has an impact on the accuracy and reliability of the decision. The entropy is a measurement when applying to the evaluation of different decision-making processes or case effectiveness evaluation.

Suppose that there are M evaluation objects and N evaluation indexes and $R'$ is the original evaluation matrix. The evaluation matrix R is obtained according to the normalization method, which is multiple objects on multiple indicators

R' = [\begin{matrix} r'_{11} & r'_{12} & \dots & r'_{1 n} \\ r'_{21} & r'_{22} & \dots & r'_{2 n} \\ ⋮ & ⋮ & ⋱ & ⋮ \\ r'_{m 1} & r'_{m 2} & \dots & r'_{mn} \end{matrix}]

Normalized $R'$ is given as

R = {(r_{ij})}_{m \times n}, r_{ij} = \frac{r'_{ij}}{\sum_{i = 1}^{m} r'_{ij}}

So $\sum_{i = 1}^{m} r_{ij} = 1$ , and the evaluation of entropy is defined as

H_{j} = - k \sum_{i = 1}^{m} r_{ij} \ln r_{ij}, j = 1, 2, \dots, n

(3)

when $r_{ij} = 0$ , $r_{ij} \ln r_{ij} = 0, k = 1 / \ln m$ .

The greater the degree of variation of the index, the smaller the information entropy, which means the greater role played by the index value in the evaluation process, and vice versa.

Then, the entropy weight of the $j th$ evaluation index can be defined as

ω_{j} = \frac{1 - H_{j}}{n - \sum_{j = 1}^{n} H_{j}}

(4)

The value of the entropy weight is directly influenced by the object of evaluation. After the object for evaluation is determined, the adjustment can be made to the evaluation index according to entropy weight, which can improve the accuracy and reliability of the evaluation. Meanwhile, the precision of the evaluation index can also be adjusted according to the entropy weight. If necessary, the evaluation value and precision can be reset.

The weights of the three indicators ( S , O , D ) of FMEA are given by the entropy weight method. The traditional RPN calculation equation RPN = S × O × D is also necessary to make a change to reflect the importance of different indicators. In this article, we use the exponential form to represent weights while retaining the traditional RPN calculation on the basis of the multiplication of three indicators, and then the new RPN calculation equation is derived as

RPN = S^{w_{s}} \times O^{w_{o}} \times D^{w_{D}}

(5)

The overall accuracy of the FMEA model is improved after the addition of the weight factor of each risk index. The RPN ranging between 1 and 10 is obtained using the method of 2-tuple linguistic information processing. The higher RPN means the greater risk. Thus, it settings the ordering of the priority rank.

Failure correction coefficient

In order to reduce the deviation caused by the isolated analysis of each functional element in QFD and defect that QFD cannot steadily reflect the engineering characteristics of components due to its comprehensive consideration of the customers’ need variation, the FMEA is required to be fed back into QFD to correct objective values. Therefore, the failure correction coefficient F (as shown in equation (6)), which is calculated by the RPN in the design failure mode and effects analysis (DFMEA) analysis, is used to correct the absolute weights of each technique in QFD by transforming the customers’ needs into engineering requirements on the component level

F = \frac{1}{1 + \frac{(RPN - Q) \times P}{10}}

(6)

Here Q is the threshold value. If the RPN value is less than Q, then its corresponding failure cause does not need to be corrected. P represents the degree of the correction. The new significant order of each engineering characteristic is obtained by multiplying F with the absolute weights of the original engineering characteristics of components, which provides new reference data for improvement in the development and design of the product remanufacturing process.

The integrated model of FMEA and QFD based on 2-tuple linguistic

In this article, the integrated model of FMEA and QFD based on 2-tuple linguistic is used to help the design of the product. The model is based on the FMEA analysis RPN results. The risk indexes of the critical failure modes are obtained by FMEA analysis, and on the basis of RPN, the fault correction index F is proposed, which will be fed back to the QFD analysis to form the integrated QFD model. The integrated QFD matrix increases the fault correction index F, which can be used to modify the absolute weight of the product’s technical characteristics obtained in QFD, so that a real QFD and FMEA integration model can be obtained. The concrete steps are as follows:

FMEA analysis process

1. First, we analyze the FMEA of the remanufacturing products. According to the analysis of similar products in the database and the experience of the experts, we can list the critical failure modes of the products $A_{1}, A_{2}, \dots, A_{m}$ and then form the critical failure mode matrix $(A_{1}, A_{2}, \dots, A_{m})$ .

2. Experts analyze the impact of each failure mode. From the expert analysis, the risk $S_{1}, S_{2}, \dots, S_{m}$ severity of failure mode $A_{1}, A_{2}, \dots, A_{m}$ can be extracted using the 2-tuple linguistic information processing method, and it can be expressed in the form of 2-tuple $(S_{k}, α_{k})$ .

3. Experts analyze the causes of each failure mode. From the expert analysis, the risk frequency degree $O_{1}, O_{2}, \dots, O_{m}$ of each failure mode $A_{1}, A_{2}, \dots, A_{m}$ can be extracted through the 2-tuple linguistic information processing method, and it can be expressed through the form of 2-tuple $(O_{k}, β_{k})$ .

4. Experts analyze the detection method of each failure mode. Using the 2-tuple linguistic information processing method, the corresponding risk detectability $D_{1}, D_{2}, \dots, D_{m}$ of each failure mode $A_{1}, A_{2}, \dots, A_{m}$ can also be extracted and is expressed in the form of 2-tuple $(D_{k}, γ_{k})$ .

5. Experts calculate the improved RPN value. The elements $S_{i}, O_{i}, D_{i}$ , $i \in (1, m)$ , are expressed in the 2-tuple form. To calculate the improved RPN value, we need to use the 2-tuple inverse function to obtain $Δ^{- 1} (S_{i}), Δ^{- 1} (O_{i}), Δ^{- 1} (D_{i})$ . Then, we take the critical failure mode as the evaluation object and S , O , and D as the evaluation indexes, so as to construct three evaluation objects, and the evaluation matrix $R'$ with the three evaluation indexes is as follows

R' = [\begin{matrix} \begin{matrix} Δ^{- 1} (S_{1}) & Δ^{- 1} (O_{1}) & Δ^{- 1} (D_{1}) \\ Δ^{- 1} (S_{2}) & Δ^{- 1} (O_{2}) & Δ^{- 1} (D_{2}) \\ ⋮ & ⋮ & ⋮ \end{matrix} \\ \begin{matrix} Δ^{- 1} (S_{m}) & Δ^{- 1} (O_{m}) & Δ^{- 1} (D_{m}) \end{matrix} \end{matrix}]

According to equations (2) and (3), the weights $ω_{S}, ω_{O}, ω_{D}$ of $S, O, D$ can be calculated, and these weights meet the following condition

0 \leq ω_{S}, ω_{O}, ω_{D} \leq 1; ω_{S} + ω_{O} + ω_{D} = 1

According to the equation $RPN = (Δ^{- 1} (S_{i}))^{ω_{S}} \times (Δ^{- 1} (O_{i}))^{ω_{O}} \times (Δ^{- 1} (D_{i}))^{ω_{D}}$ , the value of $RPN$ of the improved critical failure mode can be calculated.

6. On the basis of the improved $RPN$ values calculated in step (5), we can obtain the fault correction index F of each failure reason according to equation (6).

QFD analysis process

7. According to the market survey, the customers’ demand for the product is listed as $B_{1}, B_{2}, \dots, B_{m}$ . Experts conduct a variety of customers’ needs analysis to obtain the corresponding product technical characteristics as $T_{1}, T_{2}, \dots, T_{n}$ and then analyze the relationship between customers’ needs and product’s technical characteristics.

Using the 2-tuple linguistic computing method, we can extract the important degree of the customers’ requirement as $I_{1}, I_{2}, \dots, I_{m}$ from the customer survey. According to the experts’ analysis, the relationship between the customers’ demand and the technical characteristics can be extracted as $e_{ij}$ , i = 1, 2, …, m, j = 1, 2, …, n. Both are expressed in the form of 2-tuple $(S_{k}, α_{k})$ .

8. Calculate the absolute weight of the technical characteristics as $ω_{j}$ , the important degree of customers’ demand $I_{1}, I_{2}, \dots, I_{m}$ , and the relationship $e_{ij}$ . Using the 2-tuple inverse function, we can obtain $Δ^{- 1} (I_{i})$ , $i \in (1, m)$ and the matrix E as follows

E = [\begin{matrix} Δ^{- 1} (e_{11}) & \dots & Δ^{- 1} (e_{1 n}) \\ ⋮ & ⋱ & ⋮ \\ Δ^{- 1} (e_{m 1}) & \dots & Δ^{- 1} (e_{mn}) \end{matrix}]

The absolute weight of the technical characteristics can be obtained by equation (7)

ω_{j} = \sum_{i = 1}^{m} Δ^{- 1} (I_{i}) \times Δ^{- 1} (e_{ij}), j = 1, 2, \dots, n

(7)

Combined QFD with FMEA

9. Finally, the results of the FMEA analysis are integrated into the QFD analysis. The fault correction index F was used to modify the absolute weight of the technical characteristics obtained by QFD. After modification, new weights $ω'_{j}$ are obtained by equation (8)

ω'_{j} = ω \times F_{j}

(8)

Based on $ω'_{j}$ , we can obtain the order of all the corresponding technical characteristics, so as to choose the design material.

Numerical example of the model

For example, a gear reducer company wants to improve and redesign their product gear reducer. For improving the quality of the product by taking the customers’ needs and product’s reliability into consideration, and therefore improve the market competitiveness of the products. Thus, the product redesign evaluation was conducted before the product’s real redesign. Limited by the length of the article, only the first stage of QFD, transforming customers’ needs to technical schemes, is considered in this research.

Three experts are invited to participate in the product redesign evaluation process. First, FMEA analysis is performed for existing similar products to obtain the major failure modes, the influences of each failure mode, and the corresponding causes of the failure modes. Then, according to the experience of the existing similar products and the FMEA experts’ experience, the main failure modes of the gear reducer are listed as cracking of box $(A_{1})$ , tooth breaking of gear $(A_{2})$ , gear surface failures $(A_{3})$ , and failure of axle $(A_{4})$ . The corresponding causes of the failure modes are listed as overload $(C_{11})$ , fatigue crack $(C_{12})$ , poor welding quality $(C_{13})$ causing failure mode $A_{1}$ , overload $(C_{21})$ , material defect $(C_{22})$ , improper thermal treatment $(C_{23})$ causing failure mode $A_{2}$ , pitting $(C_{31})$ , scuffing $(C_{32})$ , wear $(C_{33})$ , plastic deformation $(C_{34})$ causing failure mode $A_{3}$ , cracks $(C_{41})$ , wear $(C_{42})$ , break $(C_{43})$ , and deformation $(C_{44})$ causing failure mode $A_{4}$ . Specific analysis is shown in Table 2.

Table 2.

FMEA of gear reducer.

No.	Failure mode	Failure influence	Severity	Cause	Frequency	Detectability	RPN	Failure correction coefficient
1	Cracking of box	Reduction of reliability	(S₆, 0.1)	Overload	(S₆, −0.3)	(S₆, −0.4)	5.70	0.637
				Fatigue crack	(S₆, 0.3)	(S₄, −0.3)	4.50	0.690
				Poor welding quality	(S₃, 0.4)	(S₂, 0.3)	2.95	0.772
2	Tooth breaking of gear	Cannot work	(S₁₀, −0.3)	Overload	(S₆, −0.2)	(S₄, −0.2)	4.87	0.572
				Material defect	(S₆, −0.3)	(S₅, 0.1)	5.83	0.632
				Improper thermal treatment	(S₆, −0.2)	(S₆, −0.2)	6.34	0.612
3	Gear surface failures	Noise and reduction of working efficiency	(S₉, 0.3)	Pitting	(S₆, 0.1)	(S₃, 0)	4.22	0.703
				Scuffing	(S₆, 0.2)	(S₃, −0.4)	3.87	0.721
				Wear	(S₆, −0.3)	(S₃, −0.4)	3.80	0.724
				Plastic deformation	(S₃, 0.1)	(S₃, −0.4)	3.36	0.749
4	Failure of axle	Reduction of reliability	(S₁₀, −0.3)	Cracks	(S₆, 0.1)	(S₄, −0.3)	4.84	0.674
				Wear	(S₆, −0.1)	(S₃, 0)	4.22	0.703
				Break	(S₆, −0.4)	(S₂, 0.3)	3.54	0.739
				Deformation	(S₆, −0.3)	(S₃, −0.2)	4.01	0.714

FMEA: failure mode and effects analysis; RPN: risk priority number.

When different experts evaluate the severity, frequency, and detectability of risks under varied conditions, the 2-tuple linguistic method is adopted to transform experts’ linguistic information into $Δ (S_{k}, α_{k})$ and then the 2-tuple inverse function in equation (1) is used to obtain the matrix $R'$ about 14 objects and 3 indexes

R' = [\begin{matrix} \begin{matrix} \begin{matrix} \begin{matrix} 6.1 & 5.7 & 5.6 \end{matrix} \\ \begin{matrix} 6.1 & 6.3 & 3.7 \end{matrix} \end{matrix} \\ \begin{matrix} 6.1 & 3.4 & 2.3 \end{matrix} \\ \begin{matrix} 9.7 & 5.8 & 3.8 \\ 9.7 & 5.7 & 5.1 \\ 9.7 & 5.8 & 5.8 \end{matrix} \end{matrix} \\ \begin{matrix} 9.3 & 6.1 & 3.0 \\ 9.3 & 6.2 & 2.6 \\ 9.3 & 5.7 & 2.6 \end{matrix} \\ \begin{matrix} 9.3 & 3.1 & 2.6 \\ 9.7 & 6.1 & 3.7 \\ 9.7 & 5.9 & 3.0 \end{matrix} \\ \begin{matrix} 9.7 & 5.6 & 2.3 \\ 9.7 & 5.7 & 2.8 \end{matrix} \end{matrix}]

After standardized matrix $R'$ and introduced the entropy weight method, the weights of S , O , and D can be obtained by equations (3) and (4): $ω_{S} = 0.173$ , $ω_{O} = 0.204$ , and $ω_{D} = 0.623$ . According to equation (5), the RPN value of the risk index can be calculated. Moreover, since the safety of gear reducers is absolutely important and its corresponding failure cause does not need to be corrected, in calculating the failure correction coefficient, the experts suggest to set the threshold value Q = 0 and the degree of correction P = 1. Then, applying equation (6), the failure correction coefficients of gear reducers are shown in Table 2.

Afterwards, the QFD table is established to continue analyzing the reliability of the gear reducers. According to the market survey, customers’ needs include high bearing capacity ( $S_{9}$ , 0.3), low cost ( $S_{7}$ , 0), high reliability ( $S_{9}$ , 0.3), compact structure ( $S_{6}$ , −0.2), and rust protection of the gear reducer ( $S_{5}$ , −0.4). Therefore, the index set of customers’ needs is $U = (u_{1}, u_{2}, u_{3}, u_{4}, u_{5}) = (high bearing capacity, low cost, high realiability, compact structure, rust protection)$ . The technical method set is V = (v₁, v₂, v₃, v₄, v₅) = (material of box-body, material of gear, thermal treatment of gear, material of axle, transmission mode)

For each functional part, two alternatives are displayed in Table 3. Then the significance of the above needs and the relationship between customers’ needs and functional alternatives are all transformed into a 2-tuple. Then the 2-tuple inverse function in equation (1) is used to obtain the matrix G .

Table 3.

QFD of gear reducer failure.

	Significance	Casted box-body	Welded box-body	Gear made of alloy steels	Gear made of medium-carbon steels	Carburize and quenched gear	Tempered gear	Axle made of alloy steels	Axle made of carbon steel	Planetary transmission	Common transmission
High bearing capacity	(S₉, 0.3)		(S₃, −0.2)	(S₉, 0.2)		(S₉, −0.2)		(S₉, 0.1)		(S₃, −0.1)
Low cost	(S₇, 0)	(S₃, 0.2)			(S₉, −0.1)		(S₃, 0.2)		(S₃, −0.3)		(S₃, −0.1)
High reliability	(S₉, 0.3)			(S₃, 0.1)				(S₃, −0.3)			(S₃, −0.1)
Compact structure	(S₆, −0.2)									(S₃, 0.2)
Rust protection	(S₅, −0.4)	(S₁, 0.3)		(S₃, 0.2)		(S₃, −0.3)		(S₁, 0.1)
Absolute important weight		28.38	26.04	129.1	62.3	94.26	22.4	114.8	18.9	45.53	47.27
Correction coefficient		0.690	0.772	1	0.632	1	0.612	1	0.637	1	0.67
RPN-based important weight		19.58	20.10	129.1	39.37	94.26	13.71	114.8	12.04	45.53	31.67
Comparison		7/8	8/7	1/1	4/5	3/3	9/9	2/2	10/10	6/4	5/6

QFD: quality function deployment; RPN: risk priority number.

Furthermore, according to equation (7), we can obtain the absolute weight of every technical characteristic $ω_{j}$ . The correction coefficients of failures which are concluded from the FMEA are fed back to the QFD table. If there is no correlation between customers’ needs and functional alternatives, then 1 is filled in the corresponding place in the QFD table. There are four functional parts which do not correlate with customers’ needs as shown in Table 3. Finally, applying equation (8), each functional part’s RPN-based important weight was obtained as shown in Table 3.

Table 3 indicates that the priority of absolute important weights and RPN-based important weight of each functional part have been changed, except three functional parts which do not correlate with customers’ needs. The results also modify the selection of the materials of each functional part. For instance, the material of box-body was changed from casting to weldment and the common transmission was replaced by a planetary one. All the above modifications indeed improve the products’ design quality and enhance the customers’ satisfaction

G = [\begin{matrix} 9.3 \\ 7.0 \\ 9.3 \\ 5.8 \\ 4.6 \end{matrix} | \begin{matrix} 0.0 & 2.8 & 9.2 & 0.0 & 8.8 & 0.0 & 9.1 & 0.0 & 2.9 & 0.0 \\ 3.2 & 0.0 & 0.0 & 8.9 & 0.0 & 3.2 & 0.0 & 2.7 & 0.0 & 2.9 \\ 0.0 & 0.0 & 3.1 & 0.0 & 0.0 & 0.0 & 2.7 & 0.0 & 0.0 & 2.9 \\ 0.0 & 0.0 & 0.0 & 0.0 & 0.0 & 0.0 & 0.0 & 0.0 & 3.2 & 0.0 \\ 1.3 & 0.0 & 3.2 & 0.0 & 2.7 & 0.0 & 0.0 & 0.0 & 0.0 & 0.0 \end{matrix}]

Conclusion

In this article, we proposed an integrated model of QFD and FMEA for the product redesign evaluation by using the 2-tuple linguistic information processing method to deal with the large amount of linguistic information in QFD and FMEA, and using the entropy weight method to improve the RPN of the risk assessment index. Furthermore, we apply the proposed model in the case of gear reducer redesign.

The results of the case study in this article show that, compared with traditional FMEA and QFD, the proposed integrated model can not only improve the product’s reliability, but also enhance the quality of product by taking the customers’ needs and product’s RPN into consideration simultaneously. From the engineering viewpoint, this method can prevent the isolated analysis of the failure modes and translate customers’ needs into engineering characteristics. From the management viewpoint, compared with numerical evaluation, the improved QFD model based on FMEA and two-tuple linguistic can deal with the problem of evaluation in real situations with uncertain linguistic information. This is suitable for the case of lack of numerical data in the process of product redesign, which requires expert language evaluation.

Although the case study has demonstrated the usefulness of the model in product redesign evaluation, we believe that there are areas for future validation and improvement. Furthermore, there are still certain limitations in our method, namely, the computation of the methodology is complicated and not easily appreciated by managers. It is necessary to develop an integrated information system to effectively support this method and provide a user interface to combine all the methodologies used in it. Moreover, the decision-makers must be at a senior level in the company in order to realize the importance and trends of all aspects, such as marketing, technology, and manufacturing.

Regarding the future research work, first, FMEA can be introduced into three stages of QFD deployment to further improve the product design quality. Second, several new 2-tuple linguistic models have recently been developed to deal with term sets that are not uniformly and symmetrically distributed.^21–23,32 How to use these new models is worth studying.

Footnotes

Handling Editor: Stephen D Prior

Declaration of conflicting interests

The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Funding

The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors would like to thank the National Social Science Fund of China for financially supporting this research under Grant No. 17BGL055.

References

Xiao

Huang

et al . Multiple failure modes analysis and weighted risk priority number evaluation in FMEA. Eng Fail Anal 2003; 18: 1162–1170.

Wang

Wei

XB.

Risk evaluation method in FMEA based on dependent linguistic ordered weighted geometric operator. J Zhejiang Univ 2012; 46: 182–188.

Rhee

Ishii

Using cost based FMEA to enhance reliability and serviceability. Adv Eng Inform 2003; 17: 179–188.

Chou

Hung

et al . Adopting the healthcare failure mode and effect analysis to improve the blood transfusion processes. Int J Ind Eng: Theory 2012; 19: 320–329.

Zhuo

Tian

YX.

Study of reliability design method based on axiomatic design and FMEA. Mech Eng 2014; 5: 36–38.

Mariajayaprakash

Senthilvelan

Failure detection and optimization of sugar mill boiler using FMEA and Taguchi method. Eng Fail Anal 2013; 30: 17–26.

Chang

Tsai

IT.

Enhancing FMEA assessment by integrating grey relational analysis and the decision making trial and evaluation laboratory approach. Eng Fail Anal 2013; 31: 211–224.

Tian

Wang

Zhang

HY.

An integrated approach for failure mode and effects analysis based on fuzzy best-worst, relative entropy, and VIKOR methods. Appl Soft Comput. Epub ahead of print 26 March 2018. DOI: 10.1016/j.asoc.2018.03.037

Taha

Salaam

Phoon

et al . Application of integrated sustainability assessment: case study of a screw design. Int J Ind Eng: Theory 2015; 22: 1–10.

10.

Sullivan

Quality function deployment. Qual Prog 1986; 19: 39–50.

11.

Gao

QS.

Research on functional relationships for QFD based on grey correlation degree. Mach Des Res 2008; 24: 10–495.

12.

Sohn

YS.

Patent-based QFD framework development for identification of emerging technologies and related business models: a case of robot technology in Korea. Technol Forecast Soc Change 2015; 94: 44–64.

13.

Moldovan

QFD employment for a new product design in a mineral water company. Proc Tech 2014; 12: 462–468.

14.

Azadi

Saen

RF.

A combination of QFD and imprecise DEA with enhanced Russell graph measure: a case study in healthcare. Socio-Econ Plan Sci 2013; 47: 281–291.

15.

Haag

Raja

Schkade

LL.

Quality function deployment usage in software development. Commun ACM 1996; 39: 41–49.

16.

Liu

Yang

Based on QFD the college students’ employment education curriculum improvement study. Mod Educ Manage 2013; 8: 156–159.

17.

Almannai

Greenough

Kay

A decision support tool based on QFD and FMEA for the selection of manufacturing automation technologies. Robot Com-Int Manuf 2008; 24: 501–507.

18.

Hassan

Siadat

Dantan

et al . Conceptual process planning—an improvement approach using QFD, FMEA, and ABC methods. Robot Com-Int Manuf 2010; 26: 392–401.

19.

Guo

Sheng

Wang

et al . Research on element importance of shafting installation based on QFD and FMEA. Proced Engineer 2017; 174: 677–685.

20.

Herrera

Martinez

A 2-tuple fuzzy linguistic representation model for computing with words. IEEE T Fuzzy Syst 2000; 8: 746–752.

21.

Dong

Herrera

et al . Personalized individual semantics in computing with words for supporting linguistic group decision making. An application on consensus reaching. Inform Fusion 2017; 33: 29–40.

22.

Dong

Herrera-Viedma

Consistency-driven automatic methodology to set interval numerical scales of 2-tuple linguistic term sets and its use in the linguistic GDM with preference relation. IEEE T Cybernetics 2015; 45: 780–792.

23.

Dong

Herrera

Connecting the linguistic hierarchy and the numerical scale for the 2-tuple linguistic model and its use to deal with hesitant unbalanced linguistic information. Inform Sciences 2016; 367: 259–278.

24.

Exploiting 2-tuple linguistic representational model for constructing HOQ-based failure modes and effects analysis. Comput Ind Eng 2013; 64: 858–865.

25.

Nie

Tian

Wang

et al . Risk evaluation by FMEA of supercritical water gasification system using multi-granular linguistic distribution assessment. Knowl-Based Syst. Epub ahead of print 23 May 2018. DOI: 10.1016/j.knosys.2018.05.030

26.

Zhang

Wang

QJ.

Discussing incomplete 2-tuple fuzzy linguistic preference relations in multi-granular linguistic MCGDM with unknown weight information. Soft Comput 2017; 15: 1–18.

27.

Herrera

Herrera-Viedma

Verdegay

JL.

A rational consensus model in group decision making using linguistic assessments. Fuzzy Set Syst 1997; 88: 31–49.

28.

Fan

ZP.

Maximal tree clustering method based on dyadic semantic information processing. J Syst Eng Electron 2006; 28: 1519–1522.

29.

Liu

Yuan

XM.

Study on 2-tuple linguistic assessment method based on grey clustering. J Grey Syst 2007; 19: 257–268.

30.

Wei

FJ.

A group comprehensive evaluation method of project success degree based on two-tuple linguistic representation. Syst Eng 2009; 27: 73–78.

31.

Shan

Yuan

et al . A new method for evaluating tour online review based on grey 2-tuple linguistic. Kybernetes 2014; 43: 601–613.

32.

Rodríguez

Martínez

et al . Personalized individual semantics based on consistency in hesitant linguistic group decision making with comparative linguistic expressions. Knowl-Based Syst 2018; 145: 156–165.

33.

Shannon

The mathematical theory of communication. ACM SIGMOBILE Mobile Comput Commun Rev 2001; 5: 3–55.