Blown films of high-density polyethylene (HDPE)/fumed silica (FS) composites were prepared by melt-mixing in twin-screw extruder. Maleic anhydride grafted polyethylene (PE-g-MA) was introduced to improve the state of filler dispersion during melt processing. The blown films were tested for thermal, mechanical, morphological, barrier, and optical properties. The Fourier Transform Infrared Spectroscopy-Attenuated Total Reflectance (FTIR-ATR) study indicated that interaction between FS and HDPE was slightly enhanced by PE-g-MA. No change in percent crystallinity was observed but mechanical properties improved after modification. Morphological analyses showed large FS clusters at higher loading which decreased after modification. Both oxygen and water vapor transmission rates of the films increased in composites as compared to HDPE, plausibly due to formation of nanogaps in blown film and/or increased solubility of penetrant molecules at filler–matrix interface.
LuJSueHJRiekerTP. Dual crystalline texture in HDPE blown films and its implication on mechanical properties. Polymer2001; 42(10): 4635–4646.
2.
GodshallDWilkesGKrishnaswamyRKSukhadiaAM. Processing-structure-property investigation of blown HDPE films containing both machine and transverse direction oriented lamellar stacks. Polymer2003; 44(18): 5397–5406.
3.
YuT-HWilkesGL. Orientation determination and morphological study of high density polyethylene (HDPE) extruded tubular films. Journal of Plastic Film & Sheeting1997; 13(4): 299–310.
4.
LottiCIsaacCSBrancifortiMCAlvesRMVLibermanSBretasRES. Rheological, mechanical and transport properties of blown films of high density polyethylene nanocomposites. European Polymer Journal2008; 44(5): 1346–1357.
5.
LiuSPXuJF. Characterization and mechanical properties of high density polyethylene/silane montmorillonite nanocomposites. International Communications in Heat and Mass Transfer2011; 38(6): 734–741.
6.
RanadeANayakKFairbrotherDD’SouzaNA. Maleated and non-maleated polyethylene–montmorillonite layered silicate blown films: Creep, dispersion and crystallinity. Polymer2005; 46(18): 7323–7333.
7.
PettarinVFrontiniPMPitaVJRDiasMLDiazFV. Polyethylene/(organo-montmorillonite) composites modified with ethylene/methacrylic acid copolymer: Morphology and mechanical properties. Composites Part A2008; 39(12): 1822–1828.
8.
NagaralliRTRamakrishnaARajuluAV. Physico-mechanical properties of filled polyethylene films. Journal of Plastic Film & Sheeting1997; 13(3): 252–262.
9.
BikiarisDPapageorgiouGPavlidouEVouroutzisNKarayannidisG. Comparative study of the effect of different nanoparticles on the mechanical properties, permeability and thermal degradation mechanism of HDPE. Journal of Applied Polymer Science2009; 114(3): 1606–1618.
10.
KalfusJJancarJKuceraJ. Effect of weakly interacting nanofiller on the morphology and viscoelastic response of polyolefins. Polymer Engineering & Science2008; 48(5): 889–894.
11.
IlerRK. The chemistry of silica. New York: John Wiley & Sons, 1979.
12.
JoshiMButolaBS. Isothermal crystallization of HDPE/octamethyl polyhedral oligomeric silsesquioxane nanocomposites: Role of POSS as nanofiller. Journal of Applied Polymer Science2007; 105(2): 978–985.
13.
JutarosagaTJeoungJSSeraphinS. Infrared spectroscopy of Si–O bonding in low-dose low-energy separation by implanted oxygen materials. Thin Solid Films2005; 476(2): 303–311.
14.
Van EsscheGKrommingaTSchmidtA. New highly efficient silica anti-blocking aids for PE and PP films. Journal of Plastic Film & Sheeting2000; 15(2): 155–168.
15.
FatahiSAjjiALafleurPG. Correlation between structural parameters and property of PE blown films. Journal of Plastic Film & Sheeting2005; 21(4): 281–305.
16.
17.
GunesISPérez-BolivarCCaoFJimenezGAAnzenbacherPJanaSC. Analysis of non-covalent interactions between the nanoparticulate fillers and the matrix polymer as applied to shape memory performance. Journal of Material Chemistry2010; 20(17): 3467–3474.
HuQMarandEDhingraSFritschDWenJWilkesG. Poly(amide-imide)/TiO2 nano-composite gas separation membranes: Fabrication and characterization. Journal of Membrane Science1997; 135(1): 65–79.
20.
21.
SohnHYMorelandC. The effect of particle size distribution on packing density. Canadian Journal of Chemical Engineering1968; 46(3): 162–167.
22.
WakemanRJ. Packing densities of particles with log-normal size distributions. Powder Technology1975; 11(3): 297–299.
23.
HaleWRDohrerKKTantMRSandID. A diffusion model for water vapor transmission through microporous polyethylene/CaCO3 films. Colloids and Surfaces A: Physicochemical and Engineering Aspects2001; 187–188: 483–491.
TakahashiSPaulDR. Gas permeation in poly(ether-imide) nanocomposite membranes based on surface-treated silica. Part 1: Without chemical coupling to matrix. Polymer2006; 47(21): 7519–7534.
26.
TakahashiSPaulDR. Gas permeation in poly(ether-imide) nanocomposite membranes based on surface-treated silica. Part 2: With chemical coupling to matrix. Polymer2006; 47(21): 7535–7547.
