Liquid–liquid phase separation of polyethylene/ethylene vinyl acetate copolymer binary blends was investigated employing rheometry, mechanical experiments, optical, and electron microscopy as well as thermal analysis. The observed phase diagram has shown that the studied polyethylene/ethylene vinyl acetate blends possess upper critical solution temperature behavior, i.e. phase separation of two components occurs in the molten state before polyethylene crystallization begins. Moreover, the interfacial interaction of phases was found to be dependent on the blend composition, and it varies considerably by the occurrence of phase inversion. In the solid state, however, the miscibility of phases is controlled by the melt temperature and cooling rate of final process. In addition, it was confirmed that imposing restrictions on phase separation leads to a noticeable improvement in the toughness of blends.
SteinmannSGronskiWFriedrichC. Influence of selective filling on rheological properties and phase inversion of two-phase polymer blends. Polymer2002; 43: 4467–4477.
2.
NittaKHYamaguchiMMorphology and mechanical properties in blends of polypropylene and polyolefin-based copolymers. In: NwabunmaDKyuT (eds). Polyolefin blends, 1st ed. Hoboken, New Jersey, USA: Wiley Interscience, 2008, pp. 224–268.
3.
ShanksRAMiscibility, morphology and properties of polyethylene blends. In: NwabunmaDKyuT (eds). Polyolefin blends, 1st ed. Hoboken, New Jersey, USA: Wiley Interscience, 2008, pp. 59–83.
4.
LiCKongQZhaoJ. Crystallization of partially miscible linear low-density polyethylene/poly(ethylene-co-vinylacetate) blends. Mater Lett2004; 58(27–28): 3613–3617.
5.
RayIKhastgirD. Correlation between morphology with dynamic mechanical, thermal, physicomechanical properties and electrical conductivity for EVA-LDPE blends. Polymer1993; 34: 2030–2037.
6.
PeonJVegaJFArocaM. Rheological behavior of LDPE/EVA-c blends. I. On the effect of ethylene/vinyl acetate comonomer in EVA copolymers. Polymer2001; 42: 8093–8101.
7.
StarkWJaunichM. Investigation of ethylene/vinyl acetate copolymer (EVA) by thermal analysis DSC and DMA. Polym Test2011; 30: 236–242.
8.
BehradfarAShojaeiASheikhN. Rheological and mechanical characteristics of low density polyethylene/ethylene-vinyl acetate/organoclay nanocomposites. Polym Eng Sci2010; 50: 1315–1325.
9.
NaBZhangQFuQ. Super polyolefin blends achieved via dynamic packing injection molding: The morphology and mechanical properties of HDPE/EVA blends. Polymer2002; 43: 7367–7376.
10.
TehJWRudinAYuenSY. LLDPE/PP blends in tubular film extrusion: Recycling of mixed films. J Plast Film Sheet1994; 10: 288–301.
11.
WuTLiYZhangDL. Study on the morphology and properties of metallocene polyethylene and ethylene/vinyl acetate blends. J Appl Polym Sci2004; 91: 905–910.
TakidisGBikiarisDNPapageorgiouGZ. Compatibility of low-density polyethylene/poly(ethylene-co-vinyl acetate) binary blends prepared by melt mixing. J Appl Polym Sci2003; 90: 841–852.
14.
PeonJAguilaraMVegaJF. On the processability of metallocene-catalysed polyethylene: Effects of blending with ethylene–vinyl acetate copolymer. Polymer2003; 44: 1589–1594.
15.
PeonJVegaJFAmoBD. Phase morphology and melt viscoelastic properties in blends of ethylene/vinyl acetate copolymer and metallocene-catalysed linear polyethylene. Polymer2003; 44: 2911–2918.
16.
KhonakdarHAWagenknechtUJafariSH. Dynamic mechanical properties and morphology of polyethylene/ethylene vinyl acetate copolymer blends. Adv Polym Technol2004; 23: 307–315.
17.
KhonakdarHAJafariSHYavariA. Rheology, morphology and estimation of interfacial tension of LDPE/EVA and HDPE/EVA blends. Polym Bull2005; 54(1–2): 75–84.
18.
FakerMAghjehMKRGhaffariM. Rheology, morphology and mechanical properties of polyethylene/ethylene vinyl acetate copolymer (PE/EVA) blends. Eur Polym J2008; 44: 1834–1842.
19.
Arrighi V, Cabral J and Cowie JMG. Miscibility. Encyclopedia of polymer science and technology 2010.
20.
ChopraDKontopoulouMVlassopoulosD. Effect of maleic anhydride content on the rheology and phase behavior of poly(styrene-co-maleic anhydride)/poly(methyl methacrylate) blends. Rheol Acta2002; 41(1–2): 10–24.
21.
KapnistosMHinrichsAVlassopoulosD. Rheology of a lower critical solution temperature binary polymer blend in the homogeneous, phase-separated, and transitional regimes. Macromolecules1996; 29: 7155–7163.
22.
VlassopoulosDKoumoutsakosAAnastasiadisSH. Rheology and phase separation in a model upper critical solution temperature polymer blend. J Rheol1997; 41: 739–755.
23.
ChopraDKontopoulouMVlassopoulosD. Interrelations between rheology and phase behaviour in partially miscible blends: The case of polydimethylsiloxane/polyethylmethylsiloxane (PDMS/PEMS). Can J Chem Eng2002; 80: 1057–1064.
24.
UtrackiLA. On the viscosity-concentration dependence of immiscible polymer blends. J Rheol1991; 35: 1615–1637.
25.
VanOeneH. Modes of dispersion of viscoelastic fluids in flow. J Colloid Interf Sci1972; 40: 448–467.
