Analysis of steady state creep behaviour of 9–12% chromium ferritic

Abstract

The present work deals with the creep behaviour of 9–12% Cr steels in the steady state (secondary) creep regime in order to enable a more detailed and exact description of the creep rupture strength on the basis of the Monkman– Grant relationship. Special attention is paid to the microstructural aspects. The steady state creep behaviour has been investigated by evaluating the creep rate and the change of stress exponent of already established grades of high temperature creep resistant steels.

Keywords

CREEP BEHAVIOUR BACK STRESS CONCEPT STEADY STATE CREEP RATE EXTRAPOLATION OF CREEP RUPTURE TIME 9&NDASH 12% CR STEELS

Get full access to this article

View all access options for this article.

References

ENNIS

P. J.

, ZIELINSKA-LIPIEC

, WACHTER

and CZYRSKA-FILEMONOWICZ

: Acta Mater., 1997, 45, 4901–4907.

KLoc

and SKLENICKA

: Mater. Sci Eng., 1997, A234-A236, 962–965.

YAVARI

and T. G. LANGDON: Acta Metall., 1982, 30, 2181.

BURTON

and G. W. GREENWOOD: Met. Sci. J., 1970, 4, 215.

FIALA

and CADEK

: Metall. Mater. Trans. A, 1982, 20A, 277.

NOVOTNÝ

FIALA

and CADEK

: Metall. Mater. Trans. A, 1985, 23A, 329.

FROST

H. J.

and ASHBY

M. F.

: ‘Deformation mechanism maps (the plasticity and creep of metals and ceramics)’, Chap. 2; 1982, Oxford, Pergamon Press.

BLUM

and ILSCHNER

: Phys. Status Solidi, 1967, 20, 629–642.

NORMAN

E. C.

and S. A. DURAN: Acta Metall., 1970, 18, 723–731.

10.

CANNON

W. R.

and O. D. SHERBY: Metall. Trans., 1970, 1, 1030–1034.

11.

RUANO

O. A.

, WADSWORTH

and O. D. SHERBY: Acta Metall., 1988, 36, 1117–1128.

12.

HARPER

J. G.

and J. E. DORN: Acta Metall., 1957, 5, 654.

13.

WILCOX

B. A.

and A. H. CIAUER: Trans. AIME, 1966, 236, 570–580.

14.

KRAUSZ

A. S.

and KRAUSZ

: ‘Unified constitutive laws of plastic deformation’; 1966, San Diego, CA, Academic Press.

15.

VOLLERTSEN

and VOGLER

: Werkstoffeigenschaften und Mikrostruktur’; 1989, München-Wien, Hanser Studien-Bücher-Carl Hanser Verlag.

16.

MONKMAN

F. C.

and N. J. GRANT: Proc. ASTM, 1956, 56, 593.

17.

ARZT

: Res. Mech., 1991, 31, 399–453.

18.

NOWICK

A. S.

and MACHLIN

E. S.

: NACA, Rep. 845, April 1946.

19.

COTTRELL

A. H.

and AYTEKIN

: J. Inst. Met., 1950, 77, 389.

20.

LAGNEBORG

: Scr. Metall., 1973, 7, 605–614.

21.

LONDON

T. G.

: Scr. Metall., 1996, 35, 733–737.

22.

KOCKS

U. F.

: Metall. Trans., 1970, 1, 1121.

23.

TAYLOR

: Proc. R Soc., 1934, 145A, 362–404.

24.

CADEK

: ‘Creep in metallic materials': 1988, Amsterdam, Elsevier.

25.

VERHOEVEN

J. D.

: ‘Fundamentals of physical metallurgy’, 1st edn; 1975, New York, Wiley.

26.

BARRETT

C. R.

, MUEHLEISEN

G. C.

and W. D. NIX: Mater. Sci. Eng., 1972, 10.

27.

MOHAMED

F. A.

and T. G. GINTER: Acta Metall., 1982, 30, 1869.

28.

BROWN

L. M.

and HAM

R. K.

: ‘Strengthening methods in crystals’, (ed. Kelly

and Nicholson

R. B.

), 9–135; 1971, London, Elsevier.

29.

BLUM

and REPPICH

: in ‘Creep behaviour of crystalline solids’, (ed. Wilshire

and Owen

I. R.

), 83–135; 1985, Swansea, Pineridge Press.

30.

HAUSSELT

J. H.

and W. D. NIX: Acta Metall., 1977, 25, 1491.

31.

ARZT

and M. F. ASHBY: Scr. Metall., 1982, 16, 1285–1290.

32.

SHEWFELT

R. S. W.

and L. M. BROWN: Philos. Mag., 1977, 35, 945.

33.

HOFER

, CERJAK

and WARBICHLER

: Mater. Sci. Technol, 2000, 16, 1221.

34.

HOFER

: ‘Microstructural analysis as basis of the development of new materials for power plants conducted on G-X 12CrMoWVNbN 10-1-1’, PhD thesis, Graz University of Technology, Graz, Austria, 1999.

35.

HÄTTESTRAND

: ‘Precipitation reactions at high temperatures in 9-12% chromium steels’, PhD thesis, Goteborg, Sweden, 2000.

36.

Nippon Steel Corp.: ‘Data package for NF616 ferritic steel’, 2nd edn; March 1994, Tokyo, Nippon Steel.

37.

SPIGARELLI

, CERRI

, EVANGELISTA

and BIANCHI

: in ‘Materials for advanced power engineering 1998’, (ed. Lecomte-Beckers

et al.), Energy Technology Series, Section 3, Part I, 539–548; 1998, Jülich, Forschungszentrum Mich.

38.

TAYLOR

, BONTEMPI

, MACIGA

and LIVRAGHI

: in ‘Materials for advanced power engineering 1994’, (ed. Coutsouradis

et al.), 341; 1994, Dordrecht, Kluwer Academic Publishers.

39.

icLoc

and SKLENICKA

: Mater. Sci Eng. A, 1997, A234-236, 962–965.

40.

POLCIK

: ‘Modellierung des Verformungsverhaltens der warmfesten 9-12% Chromstähle im Temperaturbereich von 550-650°C’, PhD thesis, Erlangen, Shaker Verlag, 1998.

41.

DIMMLER

, WEINERT

, KOZESCHNIK

and CERJAK

: Mater. Charact., 2003, 131, 347–352.

42.