The use of thermodynamic and kinetic modelling of microstructure evolution in materials exposed to high temperatures in power plants is demonstrated with two examples. Precipitate stability in martensitic 9–12%Cr steels is modelled including equilibrium phase stability, growth of Laves phase particles and coarsening of MX, M23C6 and Laves phase particles. The modelling provided new insight into the long term stability of new steels. Modelling of the detrimental precipitation of Z phase Cr(V,Nb)N is described, which points to new approaches in alloy development for higher temperatures. Predictions of interdiffusion between a MCrAlY coating and an IN738 bulk alloy by multicomponent diffusion calculations provide a highly versatile tool for life assessment of service exposed gas turbine components as well as for the development of improved coatings.
MasuyamaF.: Proc. Conf. ‘Materials for advanced power engineering 2006’, (ed. Lecomte-BeckersJ. et al), Part I, 175-188; 2006, Julich, Forschungszentrum.
2.
KernT.-U., StaubliM., MayerK. H., DonthB., ZeilerG. and DiGianfrancescoA.: Proc. Conf. ‘Materials for advanced power engineering 2006’, (ed. Lecomte-BeckersJ. et al), Part II, 843-854; 2006, Julich, Forschungszentrum.
3.
BlumH. J. R. and HaldJ.: Proc. Int. Conf. on ‘Advanced steam plant’, London, UK, May 1997, The Institution of Mechanical Engineers,3–16.
4.
HaldJ.: Proc. 1st Int. Conf. ‘Super-high strength steels’, Rome, Italy, November 2005, AIM and CSM, Paper 3.4.
5.
HendersonC.: ‘Case studies on recently constructed fossil-fired plants and summary of status of gasification combined cycle technology’; 2007, Paris, IEA/OECD.
6.
HoldsworthS. R.: Proc. Conf. ‘Materials for advanced power engineering 2006’, (ed. J. Lecomte-Beckers et al), Part I, 91-106; 2006, Julich, Forschungszentrum.
7.
AbeF.: Curr. Opin. Solid State Mater. Sci, 2004,8, (3-4), 305–311.
8.
HaldJ.: Proc. Conf. ‘Materials for advanced power engineering 2006’, (ed. J. Lecomte-Beckers et al), Part II, 917-930; 2006, Julich, Forschungszentrum.
PolcikP.: ‘Modellierung des verformungsverhalten der warmfesten 9-12% chromstähle in temperaturbereich von 550-650°C’, 92; 1999, Aachen, Shaker Verlag.
11.
HaldJ. and KorcakovaL.: ISIJ Int., 2003, 43, (3), 420.
12.
SundmanB., B. Jansson and J.-0. Andersson: Calphad, 1985, 9, 153.
13.
KorcakovaL.: ‘Microstructure evolution in high strength steel for power plant application: microscopy and modelling’, PhD thesis, Technical University of Denmark, Lyngby, Denmark, 2002.
14.
HaldJ.: Steel Res., 1996, 67, (9), 351.
15.
GustafssonA. and AgrenJ.: Acta Mater., 1998, 45, 81.
16.
AnderssonJ.-O., HoglundL., JönssonB. and AgrenJ.: in ‘Fundamentals and application of ternary diffusion’, (ed. PurdyC. R.), 153; 1990, New York, Pergamon Press.
17.
BjärboA.: Scand J. Metall, 2003, 32, (2), 94.
18.
GustafsonA. and HättestrandM.: Mater. Sci. Eng. A, 2002, A333, 279.
19.
LiftshitzI. M. and SlyozovV. V.: J. Phys. Chem. Solids, 1961, 19, 35.
20.
WagnerC.: Z. Elektrochem., 1961, 65, 581.
21.
UmantsevA. and OlsonG. B.: Scr. Metall., 1993, 30, 235.
KorcakovaL., HaldJ. and SomersM. A. J.: Mater. Charact., 2002, 47, 211.
24.
HättestrandM., SchwindM. and AndrénH.-O.: Mater. Sci. Eng. A, 1998, A250, 27.
25.
DanielsenH. K. and HaldJ.: Energy Mater., 2006, 1, 49.
26.
SchnabelE., SchwaabP. and WeberH.: Stahl Eisen, 1987, 107, 691–696.
27.
StrangA. and VodarekV.: Mater. Sci Technot, 1996, 12, 552–556.
28.
DanielsenH. K. and HaldJ.: Comput Coupling Phase Diagrams Thermochem., 2007, 31, 505–514.
29.
TaneikeM., AbeF. and SawadaK.: Nature, 2003, 424, 294.
30.
SingheiserL., GruenlingH. W. and SchneiderK.: Surf Coat. Technol, 1990, 42, (2), 101–117.
31.
CahnK. S., CheruvuN. S. and LevarantG. R.: Trans. ASME, 1999, 121, 484–488.
32.
DahlK. V., HaldJ. and HorsewellA.: J. Microsc., 2007, 225, 31–40.
33.
DahlK. V. and HaldJ.: Energy Mater., 2006, 1, (2), 106.
34.
DahlK. V. and HaldJ.: Proc. Conf. ‘Materials for advanced power engineering 2006’, (ed. Lecomte-BeckersJ. et al), Part II, 675-690; 2006, Julich, Forschungszentrum.
