This paper discusses the recycling of thermoplastic composite materials in the context of boatbuilding. Work was carried out on the recycling of an experimental thermoplastic composite rigid inflatable boat, originally built by BVT Surface Fleet and tested in service by the Royal National Lifeboat Institution. It was found that a range of useful injection moulding materials could be prepared from the hull material of the craft, demonstrating that structural thermoplastic composites are recyclable in practice as well as in principle, and confirming that they are a sustainable alternative to thermosets.
MouritzA. P., GellertE., BurchillP. and ChallisK.: ‘Review of advanced composite structures for naval ships and submarines’, Compos. Struet., 2001, 53, (1), 21–42.
2.
McconnellV. P.: ‘Composites in North America’, Reinf Plast., 2005, 49, (11), 26–33.
3.
GramannH. and KrappR. V. B.: ‘Disposal and recycling of HSC materials’, Proc. 6th Int. Conf. on ‘High-performance marine vehicles’, Naples, Italy, September 2008, University of Naples ‘Federico II’, 271-280.
4.
PickeringS. J.: ‘Recycling technologies for thermoset composite materials-current status’, Composites A, 2006, 37A, (8), 1206–1215.
5.
AllredR. E. and BusselleL. D.: ‘Tertiary recycling of automotive plastics and composites’, J. Thermoplas. Compos. Mater., 2000, 13, (2), 92–101.
6.
GiulvezanG. and CarberryB.: ‘Composite recycling and disposal, an environmental R&D issue’, Boeing Environmental Technotes, The Boeing Company, St. Louis, MO, USA, Vol. 8, no. 4, 2003.
7.
PoulakisJ. G. and PapaspyridesC. D.: ‘Recycling of polypropy-lene by the dissolution/reprecipitation technique: I. A model study’, Resour. Conserv. Regd., 1997, 20, (1), 31–41.
8.
GibsonA. G.: ‘Continuous molding of thermoplastic composites’, in ‘Comprehensive composite materials’, (ed.KellyA. and ZwebenC.), 979-998;2000, Oxford, Pergamon
9.
GibsonA. G. and MansonJ. A. E.: ‘Impregnation technology for thermoplastic matrix composites’, Compos. Manuf, 1992, 3, (4), 223–233.
10.
IjazM., RobinsonM. and GibsonA. G.: ‘Cooling and crystal-lisation behaviour during vacuum-consolidation of commingled thermoplastic composites’, Composites A, 2007, 38A, (3), 828–842.
11.
BledzkiA. K., ReihmaneS. and GassanJ.: ‘Thermoplastics reinforced with wood fillers: a literature review’, Polym.Plast. Technot Eng., 1998, 37, (4), 451–468.
12.
MatWeb: Material Property Data, Copyright1996-2009, Automation Creations Inc., Blacksburg, VA, United States, 2009, available at: http://www.matweb.com (accessed in April 2009).
13.
ThomasonJ. L.: ‘The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP’, Composites A, 2002, 33A, (12), 1641–1652.
14.
JakabE., VarhegyiG. and FaixO.: ‘Thermal decomposition of polypropylene in the presence of wood-derived materials’, J. Anal. Appl. Pyrolysis, 2000, 56, (2), 273–285.
