Carbon fibre reinforced epoxy laminates deformed in shear during tensile testing were studied in situ using synchrotron X-ray computed tomography. The deformation and damage mechanisms were evaluated as a function of strain. In particular, the evolution of matrix cracking, interply delamination and fibre rotation was obtained from the tomographies. The investigation provides new insights about the complex interaction between the different damage mechanisms as a function of the applied strain. Quantification of the evolution of the damage mechanisms is presented.
van PaepegemW, de BaereI and DegrieckJ: ‘Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part I: Experimental results’, Compos. Sci. Technol., 2006, 66, 1455–1464.
2.
TongJ, GuildFJ, OginSL and SmithPA: ‘On matrix crack growth in quasi-isotropic laminates – I. Experimental investigation’, Compos. Sci. Technol., 1997, 57, (11), 1527–1535.
3.
VarnaJ, JoffeR, AkshantalaNV and TalrejaR: ‘Damage in composite laminates with off-axis plies’, Compos. Sci. Technol., 1999, 59, (14), 2139–2147.
4.
WisnomMR: ‘The effect of fibre rotation in ±45° tension tests on measured shear properties’, Composites, 1995, 26, 25–32.
SketF, SeltzerR, Molina-AldareguíaJM, GonzalezC and LlorcaJ: ‘Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography’, Compos. Sci. Technol., 2012, 72, 350–359.
7.
SketF, EnfedaqueA, AltonC, GonzálezC, Molina-AldareguiaJ and LlorcaJ: ‘Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates’, Compos. Sci. Technol., 2014, 90, 129–138.
8.
WrightP, MoffatA, SinclairI and SpearingSM: ‘High resolution tomographic imaging and modeling of notch tip damage in a laminated composite’, Compos. Sci. Technol., 2010, 70, 1444–1452.
9.
AroushDRB, MaireE, GauthierC, YoussefS, CloetensP and WagnerHD: ‘A study of fracture of unidirectional composites using in situ high-resolution synchrotron X-ray microtomography’, Compos. Sci. Technol., 2006, 66, 1348–1353.
10.
WrightP, FuX, SinclairI and SpearingSM: ‘Ultra High resolution computed tomography of damage in notched carbon fibre-epoxy composites’, J. Compos. Mater., 2008, 42, 1993–2002.
11.
ScottAE, MavrogordatoM, WrightP, SinclairI and SpearingSM: ‘In situ fibre fracture measurement in carbon-epoxy laminates using high resolution computed tomography’, Compos. Sci. Technol., 2011, 71, 1471–1477.
HernándezS, SketF, Molina-AldareguíaJM, GonzálezC and LlorcaJ: ‘Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites’, Compos. Sci. Technol., 2011, 71, 1331–1341.
14.
BuffiereJY, MaireE, AdrienJ, MasseJP and BollerE: ‘In-situ experiments with X-ray tomography: an attractive tool for experimental mechanics’, Exp. Mech., 2010, 50, 289–305.
