Slip initiation and progression in helical armouring layers of unbonded flexible pipes and its effect on pipe bending behaviour

Abstract

Comparatively straightforward analytical formulations are given for determining the bending moment-curvature relationship for a helical layer in unbonded flexible pipes. The approach takes into account the non-linearity of the layer caused by sliding of individual helical elements between the surrounding layers. Bending stiffness of a helical layer is found to be a function of bending curvature, interlayer friction coefficients and interlayer contact pressures. The analysis presented here is based on the Coulomb friction model and is derived using the principle of virtual work. Theoretical results for a typical unbonded flexible pipe using the non-linear formulation for helical layers are compared with experimental data.

Keywords

flexible pipe flexible riser helical layer bending stiffness interlayer friction interlayer slip

Get full access to this article

View all access options for this article.

References

McNamara

J. F.

Harte

A. M.

Three-dimensional analytical simulation of flexible pipe wall structure. In Proceedings of the Fifth International Conference on Offshore Mechanics and Arctic Engineering, The Hague, March 1989, pp. 477–482.

Witz

J. A.

Tan

On the axial-torsional structural behaviour of flexible pipes, umbilicals and marine cables

Mar. Struct., 1992, 5, 205–227.

Witz

J. A.

A case study in the cross-section analysis of flexible risers

Mar. Struct., 1995, 9, 885–904.

Bech

Skallerud

Sodahl

Structural damping in design analysis of flexible risers. In Proceedings of the First European Conference on

Flexible Pipes, Umbilicals and Marine Cables (MARINFLEX), London, 1992.

Feret

Bournazel

Calculation of stresses and slip in structural layers of unbonded flexible pipes

J. Offshore Mech. Arctic Engng, 1987, 109, 885–904.

Witz

J. A.

Tan

On the flexural structural behaviour of flexible pipes, umbilicals and marine cables

Mar. Struct., 1992, 5, 229–249.

Kebadze

Kraincanic

Non-linear bending behaviour of offshore flexible pipes. In Proceedings of the Ninth International Conference on

Offshore and Polar Engineering, Brest, May 1999, Vol.II, pp. 226–233.

Claydon

P. W.

Cook

Brown

P. A.

Chandwani

A theoretical approach to prediction of service life of unbonded flexible pipes under dynamic loading conditions

Mar. Struct., 1992, 5 (1), 399–429.

Cook

Claydon

P. W.

Structural damping in design analysis of flexible risers. In Proceedings of the First European Conference on

Flexible Pipes, Umbilicals and Marine Cables (MARINFLEX), London, 1992.

10.

Out

J. M.M.

von Morgen

B. J.

Slippage of helical reinforcement on a bent cylinder

Engng Struct., 1997, 19 (6), 507–515.

11.

Raoof

Hobbs

R. E.

The bending of spiral strand and armoured cable close to terminations

J. Energy Resour. Technol., 1984, 106, 349–355.

12.

Hobbs

R. E.

Ghavami

The fatigue of structural wire strands

Int. J. Fatigue, 1982, 4, 69–72.

13.

Saevik

Berge

Fatigue testing and theoretical studies of two 4 inch flexible pipes

Engng Struct., 1995, 17 (4), 276–292.

14.

Tuohy

Kalman

Chen

Williamson

Wilhelmsen

Berge

Lotveit

S. A.

Qualification of a 15-inch id flexible riser for export oil and gas service. In Proceedings of the Third European Conference on

Flexible Pipes, Umbilicals and Marine Cables (MARINFLEX), London, 1999, Ch. 9.

15.

Kebadze

Theoretical modelling of unbonded flexible pipe cross-sections. PhD thesis, South Bank University, 2000.