Geometrical characterization of canted coil springs

Abstract

This article presents a geometrical description of canted coil springs as a particular type of space curve. The influence of the canted angle on the geometrical curvature and torsion is investigated in order to characterize the three-dimensional geometry of the springs. Geometrical descriptions of helical spring rings generated by joining together the two ends of a rectilinear-axis spring as well as several types of spring rings, obtained from rectilinear-axis canted coil springs, are proposed. To create such ring geometries, conservation of length of wire is assumed and approximate relations are derived in order to simplify computations. These geometrical descriptions are then applied to generate appropriate three-dimensional models. Such models can be further imported to computer-aided design and finite-element analysis programmes in order to estimate the mechanical response of such springs.

Keywords

canted coil spring spring ring

Get full access to this article

View all access options for this article.

References

Wahl

A. M.

Mechanical springs, 2001 (McGraw-Hill Book Company, Spring Manufacturers Institute, Inc.).

Mott

R. L.

Machine elements in mechanical design, 2nd edition, 1992 (Merrill Pub. Co., New York).

Brown

Mechanical springs, 1981 (Oxford University Press, published for the Design Council, the British Standards Institution, and the Council of Engineering Institutions).

Carlson

Spring designer's handbook, 1978 (M. Dekker, New York).

Balsells

P. J.

Canted coil spring and seal. US Pat. 4655462, 1987.

Balsells

P. J.

Manufacturing method for canted-coil spring with turn angle and seal. US Pat. 4961253, 1990.

Dunlap

P. H.

Steinetz

B. M.

DeMange

J. J.

Taylor

S. C.

Toward an improved hypersonic engine seal. Technical report National Aeronautics and Space Administration John H. Glenn Research Center, NASA TM-2003-212531, AIAA-2003-4834, 2003.

Dunlap

P. H.

Steinetz

B. M.

DeMange

J. J.

High temperature propulsion system structural seals for future space launch vehicles. Technical report National Aeronautics and Space Administration John H. Glenn Research Center, NASA TM-2004-212907, 2004.

DeMange

J. J.

Dunlap

P. H.

Steinetz

B. M.

Advanced control surface seal development for future space vehicles. Technical report National Aeronautics and Space Administration John H. Glenn Research Center, NASA TM-2004-212898, 2004.

10.

Oswald

J. J.

Mullen

R. L.

Dunlap

P. H.

Steinetz

B. M.

Modeling and evaluation of canted coil springs as high temperature seal preloading devices. Technical report National Aeronautics and Space Administration John H. Glenn Research Center, NASA TM-2004-213189, AIAA-2004-3889, 2004.

11.

Nutbourne

A. W.

Martin

R. R.

Differential geometry applied to curve and surface design, 1988 (Ellis Horwood Limited, New York).

12.