Comparative thermal stress analysis of gasketed and non-gasketed flange joints for safe operating conditions

Abstract

The performance of a flanged joint is characterized mainly by its ‘strength’ and ‘sealing capability’. A number of analytical and experimental studies have been conducted to study these characteristics under only internal pressure loading. However, with the advent of new technological trends for high temperature and high-pressure applications, an increased demand for more complex analysis is recognized. The effect of steady-state thermal loading is a well-recognized problem and makes the analysis more complex. To investigate joint strength and sealing capability under combined internal pressure and different steady-state thermal loadings, a comparative three-dimensional non-linear finite-element analysis of gasketed and non-gasketed flange joints is carried out and their behaviour is discussed. To determine the safe operating conditions or actual joint load capacity, both the flange joints are further analysed for different internal pressures and temperatures.

Keywords

non-gasketed gasketed flanged joint bolt-up operating sealing strength

Get full access to this article

View all access options for this article.

References

BS 1560. Steel pipe flagnes for the petroleum industry (London, UK: British Standards Institution 1989)

(ASME boiler and pressure vessel code, section VIII Div. 1, Appendix 2, 1998 New York, USA: American Society of Mechanical Engineers 1998)

Abid

Experimental and analytical studies of conventional (gasketed) and unconventional (non gasketed) flanged pipe joints (with special emphasis on the engineering of ‘joint strength’ and ‘sealing’) (2000) PhD Thesis

Abid

Nash

D. H.

‘Comparative study of the behavior of conventional gasketed and compact non-gasketed flanged pipe joints under bolt up and operating conditions’

Int. J. Press. Vessels Pip. 80 (2004): 831–841

Power

D. J.

A study of conventional and unconventional flanged pipe joint styles using non linear finite element analysis techniques (1997) M Phil Thesis

Nash

D. H.

Abid

‘Combined external loads tests for standard and compact flanges’

Int. J. Press. Vessels Pip. 7713 (2000): 799–806

Abid

Nash

D. H.

Webjom

‘The stamina of non-gasketed flanges’

Fatigue 2000 (2000): 575-584 (Cambridge, UK)

Abid

Nash

D. H.

‘A parametric study of metal-to-metal contact flanges with optimised geometry for safe stress and no-leak conditions’

Int. J. Press. Vessels Pip. 81 (2004): 67–74

Webjörn

Flange design in Sweden (In Proceedings of the Petrochemical Mechanical Engineering Conference, American Society ofMechanical Engineers, Philadelphia PA, September 1967, pp 17–20)

10.

Webjörn

The bolted joint - a series of problems. Linköping Studies in Science and Technology (1985): Dissertation No. 130

11.

Nash

D. H.

Spence

Tooth

A. S.

Abid

Power

D. J.

‘A parametric study of metal-to-metal full faces taper hub flanges’

Int. J. Press. Vessels Pip. 7713 (2000): 791–798

12.

Bouzid

Nechache

‘The effect of steady state thermal loading on the deflections of flanged joint with a cover plate’ (2002)

13.

Nechache

Bouzid

‘The determination of load changes in bolted gasketed joints subjected to elevated temperature’ (2003)

14.

(ASME boiler and pressure vessel code, Section II, Part D, 1998 New York, USA: American Scoeity of mechanical Engineers 1998)

15.

Spence

Macfarlane

D. M.

Tooth

A. S.

‘Metal-to-metal full face taper hub flanges: Finite element model evaluation and preliminary plastic analysis’

Proc. IMechE, Part E: J. Process Mechanical Engineering 212 (E2) (1998): 57-69 DOI: 101243/0954408981529303

16.

ANSYS Inc. ANSYS elements manual (2004)